| Search |
Ethyl amine from Acetonitrile
I have come across two ways to reduce a nitrile to its corrisponding primary amine. Using Lithium A ... |
20-7-2006 at 11:04
by: Endo |
doubt about benzene
Double,
I suggest you just break out your chemistry book and look up aromatic compounds[benzene]. ... |
18-7-2006 at 05:13
by: Endo |
Smoke
I have done smoke using sugar/KNO3 in a 50/50 mix. Heat them together carefully with a lot of stirr ... |
17-7-2006 at 06:26
by: Endo |
Unusual Chemicals, what to do with them ...?
for Imidazole I found several different organometallic compounds.
Involving Cu, Co, Cr,Fe and Ag.
... |
12-5-2006 at 09:47
by: Endo |
Unusual Chemicals, what to do with them ...?
I have a Kilo of Imidazole...
I have been thinking about looking up to see if diazo chemistry wi ... |
11-5-2006 at 14:21
by: Endo |
Imine Reduction with NaBH4
Look up Saponification. |
10-5-2006 at 05:24
by: Endo |
trioxane formaldehyde generator
Would I need an anydrous acid? H2SO4 or would any strong acid work? Like HCl?
I am picturing usin ... |
5-5-2006 at 08:45
by: Endo |
alkalization
I do know that an alkali metal added to an alcohol will do the opposite of what you were studying. ... |
5-5-2006 at 08:41
by: Endo |
Exotic thermites & analogs
[quote][i]Originally posted by chemoleo[/i]
Crankyperson, I'd like to hear more details on your rea ... |
14-3-2006 at 06:18
by: Endo |
Movie-style fireballs
Lets not forget paraffin as a good fuel source for a fireball..
Your typical mix of charcoal and ... |
16-2-2006 at 06:25
by: Endo |
Diphenyl Carbazide Detection of unknown
Mercury by AA is not usually done in an open flame or in a graphite furnace. It usually will use a ... |
16-2-2006 at 06:15
by: Endo |
First Try
I tried this today,
Temps outside were around 15F so I figured it would be a good time to try thi ... |
11-2-2006 at 09:54
by: Endo |
Preparation of trinitromethane
[quote][i]Originally posted by chemoleo[/i]
Do you realise that tetranitromethane can be made from ... |
10-2-2006 at 06:45
by: Endo |
Acetone > lachyrmator
This looks interesting,
I am trying to get to CuCl Cu(I) for some organic chem reactions...
A ... |
16-1-2006 at 06:52
by: Endo |
Errr Ooops...
I looked at my reference books and you are right... I guess when I get to messing with amines the wh ... |
13-1-2006 at 05:41
by: Endo |
Nitration of BHT
Hi all,
I was considering the nitration of BHT (butylated hydroxy toluene). (the one that looks l ... |
12-1-2006 at 16:04
by: Endo |
Making aniline
I recently got some NaNO2 and now I just need a good target to play with...
I would like to make ... |
12-1-2006 at 15:51
by: Endo |
Manganese Heptoxide type reaction.
Sorry about that... It took me some time to figure out where the post had gone...
It looks like I ... |
10-1-2006 at 19:51
by: Endo |
Gallic acid from trees
Hi all,
I have been tinkering with a whistle mix... I think it corrisponds to mix #4 on this pag ... |
8-1-2006 at 12:25
by: Endo |
Tungsten experments
Hi all,
I recently was given a bunch of lanthanated tungsten rod ends. These are left over after ... |
7-1-2006 at 08:31
by: Endo |
Manganic Acid
While reading through the HF thread I saw the +7 oxidation experement with permanganate.
It got ... |
6-1-2006 at 07:25
by: Endo |
Hydrofluoric Acid experiments
I use HF almost weekly to prepare samples when assaying them for TiO2 content. We dissolve/digest a ... |
6-1-2006 at 07:11
by: Endo |
cleaning engine used oil..
I have seen some motor oils with octocrylene added as a thickening/viscosity increasing agent. (2-e ... |
5-1-2006 at 13:26
by: Endo |
