| Search |
| [Next Page] |
Electrical ignition system
if you use excessive wire for your bridge they do.
a small delay is natural given distance, short ... |
25-4-2017 at 07:37
by: XeonTheMGPony |
Electrical ignition system
need to make a berm, for that stuff I use a pit. easy to dig down then used the soile dug to make a ... |
24-4-2017 at 07:28
by: XeonTheMGPony |
Electrical ignition system
the det leads are 16 guage, they do not need to be large nor the insulation thick, your trunk line n ... |
24-4-2017 at 07:04
by: XeonTheMGPony |
Can nitrous oxide be used as an inert gas?
Molecular sieve N2 concentrators are even better, old fridge pump, some valves and don!
Will post ... |
24-4-2017 at 06:54
by: XeonTheMGPony |
pH meter, drying cabinet, thermometers, stirrers
then you can easily make an adapter for it, as for the prob you can get Ph probes from Ecolabs as th ... |
22-4-2017 at 11:35
by: XeonTheMGPony |
Preperation of isbutyl nitrite
HCl is easier to remove from the final product as it is a gas where as sulfuric acid is a viscous oi ... |
22-4-2017 at 11:24
by: XeonTheMGPony |
pH meter, drying cabinet, thermometers, stirrers
What sort of battery did the Ph meter used? Would be worth while to make an adapter for it! |
22-4-2017 at 10:51
by: XeonTheMGPony |
Electrical ignition system
Figured I'd show you some of the complete cap assemblies I make, the metal one is a 0sec delay, so i ... |
22-4-2017 at 09:30
by: XeonTheMGPony |
Inexpensive high-pressure gas pump
with a fridge compressor you can easily get 500 psi, prob is once turned off it won't be able to sta ... |
21-4-2017 at 15:41
by: XeonTheMGPony |
new toys
I just made a 105 dollar order from deschem, so far they been a seemingly good quality source (Good ... |
21-4-2017 at 03:51
by: XeonTheMGPony |
Electrical ignition system
[rquote=481053&tid=73176&author=yobbo II]
I believe that I read somewhere or other that if ... |
19-4-2017 at 15:31
by: XeonTheMGPony |
Electrical ignition system
side really doesn't matter so long as the resister is there.
Now if the led you have is rated for ... |
18-4-2017 at 04:45
by: XeonTheMGPony |
My copper tetra Amine Adventure
[rquote=480939&tid=73261&author=PHILOU Zrealone]What is NOH?
Nickel oxyde hydride? A typo ... |
18-4-2017 at 04:27
by: XeonTheMGPony |
Packet Desicants
I use the cobalt chloride doped silica gell too, same source but I mix it with the packets I find or ... |
17-4-2017 at 16:15
by: XeonTheMGPony |
Electrical ignition system
No the led will instantly burn out
you need a 2K resistor in series with the LED less it has a bu ... |
17-4-2017 at 16:10
by: XeonTheMGPony |
Electrical ignition system
you need a resister in there or the led would be toast but ya looks correct |
17-4-2017 at 09:38
by: XeonTheMGPony |
My copper tetra Amine Adventure
unless your red seal trades or a science department you can't get any thing of use able value here i ... |
17-4-2017 at 03:39
by: XeonTheMGPony |
My copper tetra Amine Adventure
Got more NOH so this is how it looks after the second absorption run, I can now smell strong free am ... |
16-4-2017 at 09:44
by: XeonTheMGPony |
Electrical ignition system
here ya go, the test for power can be omitted given your circuit design, as it is not very applicabl ... |
16-4-2017 at 09:42
by: XeonTheMGPony |
Electrical ignition system
Clarification!!
2 L.E.D.s one to indicate Armed circuit condition and the L.E.D. indicating conti ... |
16-4-2017 at 06:37
by: XeonTheMGPony |
Electrical ignition system
it is just a single position single throw switch you do not use any other connections.
basically ... |
16-4-2017 at 06:24
by: XeonTheMGPony |
Liquid Mercury 3x distilled dental grade 99.9% Cheap!
Look at date this thread was long since dead,
and what sheltered individual could see the name as ... |
16-4-2017 at 06:13
by: XeonTheMGPony |
TNT without SO3 or N2O5
As said above the only way to do it and properly is to do the 3 step process then proper separation ... |
12-4-2017 at 10:51
by: XeonTheMGPony |
TNT without SO3 or N2O5
From all my research I never seen the need for any of that, albeit it will improve yields but not es ... |
11-4-2017 at 10:33
by: XeonTheMGPony |
Chemicals that are expensive to buy but easy to make
[rquote=480003&tid=73192&author=Antiswat]
ethyl chloride from Cl2 + ethanol
[/rquote]
... |
11-4-2017 at 10:29
by: XeonTheMGPony |
| [Next Page] |
