Search |
[Next Page] |
The short questions thread (3) My stirrer goes from 1 to 10 and the stir bar will hit the walls if I go past 7 regardless of how sl ... |
22-12-2012 at 15:05 by: gnitseretni |
The short questions thread (3) What do you do when the stirbars keep flying into the walls of the container? The smaller (1"-1.5") ... |
22-12-2012 at 12:24 by: gnitseretni |
Silver Acetylide synthesis I don't think those pics are big enough |
21-12-2012 at 12:31 by: gnitseretni |
Exotic Primaries - Complex Salts Finally got a chance to make some Nickel Hydrazine Nitrate. I decided to make it on a tiny scale for ... |
24-11-2012 at 13:24 by: gnitseretni |
ETN - H2SO4 surplus + mixed charge Yes, you can. |
24-11-2012 at 10:23 by: gnitseretni |
GEET Fuel Processor You don't believe you can get more MPGs by running a gas engine on gasoline vapor? What exactly are ... |
16-9-2012 at 12:43 by: gnitseretni |
GEET Fuel Processor The invertor calls the GEET Fuel Processor an "on-board compact [b]plasma[/b] fuel refinery that ren ... |
16-9-2012 at 10:25 by: gnitseretni |
Need Hydrazine hydrate I'm looking for hydrazine hydrate, but I can't find a company that will sell it to individuals. (Wel ... |
12-9-2012 at 14:42 by: gnitseretni |
The short questions thread (3) Ha, I just bought a hand operated pump for $70 five mins ago. Goes up to 9700 PSI. Should be enough ... |
11-9-2012 at 18:03 by: gnitseretni |
The short questions thread (3) A couple of years ago I tried some hydroforming with my pressure washer but it didn't have enough pr ... |
10-9-2012 at 19:45 by: gnitseretni |
Funnel/trumpet liner vs straight cone? 0.5 CD from base of the liner? Surely you meant to say from TIP of the liner? 0.5 CD is very little ... |
2-9-2012 at 06:02 by: gnitseretni |
Unconventional Shaped Charges Oops, yeah I thought it was steel. Was kinda wondering why you'd use a steel pipe and then hold the ... |
6-6-2012 at 19:35 by: gnitseretni |
Unconventional Shaped Charges Some improvements would be like you already said, thicker liner, more head height, perhaps increase ... |
6-6-2012 at 16:10 by: gnitseretni |
Question for a machinist Nah, I think I'll just get that plate from McMaster that I mentioned in my first post.
Thanks thoug ... |
8-3-2012 at 16:11 by: gnitseretni |
Rouge science If he really did kill that guy for whatever reason other than self defense or to save someone else's ... |
8-3-2012 at 04:03 by: gnitseretni |
Question for a machinist Lexan wouldn't work. The bed is heated from underneath with resistors, to about 70C. The bed is heat ... |
8-3-2012 at 03:54 by: gnitseretni |
Question for a machinist Crap, I meant 9 inches square (9X9). Sorry, everybody! |
7-3-2012 at 19:42 by: gnitseretni |
Question for a machinist A pool of mercury? I think I'll pass up on that
Btw, it's 9 square inch, not 3 square inch. |
7-3-2012 at 16:42 by: gnitseretni |
Question for a machinist Sounds interesting. I'll look into it. |
7-3-2012 at 09:34 by: gnitseretni |
Question for a machinist I understand why you question the rigidity of the machine. I don't like the plastic parts either, no ... |
6-3-2012 at 10:08 by: gnitseretni |
Question for a machinist I found a website of a guy that does alot of scraping. I contacted him to see if he'd be interested ... |
5-3-2012 at 16:06 by: gnitseretni |
Question for a machinist The plate will be used as a bed on a 3D printer. I need a bed with a flatter surface than the one I ... |
4-3-2012 at 19:58 by: gnitseretni |
Question for a machinist I don't know any local shop that uses laser, waterjet but not laser. The waterjet shop has a $50 min ... |
4-3-2012 at 16:07 by: gnitseretni |
Question for a machinist I have a question for a machinist.
I need a 9 square inch 1/4" thick aluminum plate that's as fla ... |
4-3-2012 at 15:37 by: gnitseretni |
Unconventional Shaped Charges Did another shaped charge. But it was a failure. Wasn't nearly as loud as it shoulda been. I think I ... |
4-3-2012 at 13:29 by: gnitseretni |
[Next Page] |