| Search |
| [Next Page] |
Unconventional Shaped Charges
I always anneal the copper sheet before forming a liner now since neonpulse told me it would be easi ... |
29-5-2015 at 09:45
by: greenlight |
Alternative to magnetic stir-bar?
A larger stir bar such as 3 or 3.5 inch is going to require more power for it to spin so it may not ... |
29-5-2015 at 09:33
by: greenlight |
Unconventional Shaped Charges
I have not had any success finding any metal formers on the internet useful for SC liners apart from ... |
29-5-2015 at 05:20
by: greenlight |
Unconventional Shaped Charges
That may explain why the half- hole from the 37 gram EFP that skimmed the top of the plate produced ... |
29-5-2015 at 03:41
by: greenlight |
Unconventional Shaped Charges
Thankyou for resizing the images I have no idea how to do it 
I have uploaded a picture of target ... |
28-5-2015 at 19:30
by: greenlight |
Cleaning glassware...
98% sulphuric is good for getting stubborn stains off.
I usually rinse my quick-fit glass pieces (a ... |
28-5-2015 at 08:33
by: greenlight |
Unconventional Shaped Charges
Just wanted to report a final success with small size EFP after a couple of failures.
Instead of ... |
28-5-2015 at 08:19
by: greenlight |
Pretty Pictures (2)
Probably has already been done but rhodamine B in water:
[Edited on 28-5-2015 by greenlight]
... |
28-5-2015 at 07:19
by: greenlight |
Problem in Chlorate
I am going to purchase one of these variable 30v 5 amp variable benchtop power supplys next but for ... |
23-5-2015 at 04:29
by: greenlight |
Problem in Chlorate
So is the titanium strip essential and it will not work if I attach the alligator clips straight ont ... |
22-5-2015 at 20:57
by: greenlight |
Problem in Chlorate
Again thanks for the help!!
Woelens setup for power supply is 5 volt 5 amperes.
I have read that f ... |
22-5-2015 at 19:05
by: greenlight |
Problem in Chlorate
Thanks heaps for the help guys I have the power supply all wired up now ready to attach to the cell ... |
22-5-2015 at 11:12
by: greenlight |
Problem in Chlorate
Thanks guys, that helped heaps.
I just finished wiring it up minus the anode and cathode wires whic ... |
21-5-2015 at 07:43
by: greenlight |
Setting up Lab - Help Please!
I have the same problem with the heat as I am using a workshop.
I brought a fridge/freezer for stor ... |
20-5-2015 at 19:59
by: greenlight |
Problem in Chlorate
Thankyou very much, so the anode goes to the V+ and the cathode to the COM terminals.
I am still sl ... |
20-5-2015 at 19:45
by: greenlight |
Problem in Chlorate
Yes it is 5 volt 20 amp.
Is the ground the circle with 3 lines in it or the one marked N? |
20-5-2015 at 09:01
by: greenlight |
Problem in Chlorate
I have been gathering the materials for a Potassium chlorate electrolysis cell and have finally got ... |
20-5-2015 at 05:34
by: greenlight |
Pretty Pictures (2)
Yes, would be good, unfortunately don't have a good enough camera for this |
17-4-2015 at 05:35
by: greenlight |
Pretty Pictures (2)
1 gram flask cracker's mid-pop made from potassium permanganate, sulphur, and aluminum flash:
... |
17-4-2015 at 05:30
by: greenlight |
Pretty Pictures (2)
Strontium nitrate and shellac mixture; not the prettiest, but still very nice to look at:
Won't le ... |
17-4-2015 at 04:44
by: greenlight |
Can somebody recommend a good magnetic stirrer hotplate??
My hotplate has a thermostat which can hold a temperature for a long time as I think just about all ... |
16-4-2015 at 18:28
by: greenlight |
Can somebody recommend a good magnetic stirrer hotplate??
I have had a bad experience with chinese made heating equipment too, namely a heating mantle.
If yo ... |
16-4-2015 at 09:24
by: greenlight |
Using less and making smaller batches (PETN)
Searching finds this, someone has asked the same question you have on here before:
http://www.sci ... |
14-4-2015 at 18:37
by: greenlight |
Problem in Chlorate
Thanks for the replies guys, I too don't know much about electronics at all. I think I will try the ... |
29-3-2015 at 00:28
by: greenlight |
Problem in Chlorate
I am setting up an electrolysis cell to make my own potassium chlorate as it is very hard to obtain ... |
28-3-2015 at 23:19
by: greenlight |
| [Next Page] |
