Search |
[Next Page] |
Using reflux condenser in a distillation column? better design uses a small coil just after the bottom of the reflux column, you set out going water ... |
3-12-2018 at 03:49 by: XeonTheMGPony |
Ammonia Generation I usually use and addition funnel, I make a saturated sulfate solution and this goes in the flask a ... |
2-12-2018 at 05:01 by: XeonTheMGPony |
When Chemistry Goes Wrong [rquote=554213&tid=63645&author=Deathunter88][rquote=554173&tid=63645&author=JScott] ... |
20-11-2018 at 18:01 by: XeonTheMGPony |
Beryllium 99.9+% machined rods for sale! Ohh I can finnaly start making a pit, now just need 14kg of ,,,,,,,,,,,,,,, |
13-11-2018 at 18:52 by: XeonTheMGPony |
Nickel from NiCd batteries Cadmium is very toxic, it goes after kidneys liver, be very diligent in your work with it, gloves an ... |
12-11-2018 at 06:55 by: XeonTheMGPony |
Laboratory Equipment Suppliers Help [rquote=551862&tid=103319&author=Funkerman23][rquote=551669&tid=103319&author=XeonTh ... |
12-11-2018 at 06:02 by: XeonTheMGPony |
Lessons Learned [rquote=551472&tid=103518&author=CharlieA]Well said...also, don't leave something being heat ... |
11-11-2018 at 06:12 by: XeonTheMGPony |
Laboratory Equipment Suppliers Help [rquote=551677&tid=103319&author=ClF3]Hi thanks for the replies and comments on safety and g ... |
11-11-2018 at 06:08 by: XeonTheMGPony |
Laboratory Equipment Suppliers Help [rquote=551191&tid=103319&author=Funkerman23]I will give you a condensed version of the many ... |
11-11-2018 at 05:53 by: XeonTheMGPony |
Recovering a sulphated lead acid battery standard test is 5 amps for 20 hours for determining ampacity.
8h rate will be higher AH when tes ... |
25-10-2018 at 17:03 by: XeonTheMGPony |
Recovering a sulphated lead acid battery SLR = Starting, lights running battery.
Hard sulfate is far more soluble in pure water then in a ... |
24-10-2018 at 15:15 by: XeonTheMGPony |
Sodium Ethyl Sulfate Report not at those temperatures to any significant degree |
23-10-2018 at 04:09 by: XeonTheMGPony |
Recovering a sulphated lead acid battery SLR batteries use paper thin plates, a great many of them, on any thing at or below 50% discharge th ... |
23-10-2018 at 04:02 by: XeonTheMGPony |
Building a cold trap [rquote=545099&tid=98798&author=Ubya]https://youtu.be/mzeRvdnIP-I
if you were able to put ... |
20-10-2018 at 05:43 by: XeonTheMGPony |
Building a cold trap Here ya go, cold traps are harder then ya think to get a good design going but worth it. |
20-10-2018 at 05:33 by: XeonTheMGPony |
Separating DMF from water [rquote=544293&tid=98207&author=clearly_not_atara]I guess I'll have to revise that recommend ... |
17-10-2018 at 03:57 by: XeonTheMGPony |
Separating DMF from water [rquote=544258&tid=98207&author=clearly_not_atara][quote]I haven't found any info on salting ... |
16-10-2018 at 16:34 by: XeonTheMGPony |
Catching FOX no. 7 (with pics) Swedging tool = tube expanding : These can be lathed if you have access to one
https://www.googl ... |
16-10-2018 at 04:18 by: XeonTheMGPony |
Hydrogen Embrittlement - when to worry about it Preheat the stainless befor any welding then slow cool.
Best is 316L (L means low carbon) but all ... |
15-10-2018 at 16:12 by: XeonTheMGPony |
Hydrogen Embrittlement - when to worry about it The hydrogen reacts with carbon forming methane and slowly converting the steel to plain old iron.
... |
15-10-2018 at 04:01 by: XeonTheMGPony |
Ammonium Nitrate Prills for sale [rquote=543170&tid=94941&author=Sulaiman]As Taperlocked has not responded I assume the post ... |
13-10-2018 at 14:19 by: XeonTheMGPony |
How to maintain 0C Cooling Bath for 12 hours? They can go to -20, it is the question of thermostat and heat load, more heat it will start to rise ... |
12-10-2018 at 03:47 by: XeonTheMGPony |
Can Someone Explain This? - temperature will effect measure, you need to know the stc that it was calibrated at and then ensure ... |
11-10-2018 at 15:44 by: XeonTheMGPony |
How to maintain 0C Cooling Bath for 12 hours? get a free water cooler, the type with pipes in the back, a bit of wiring and poof you have temp con ... |
11-10-2018 at 15:37 by: XeonTheMGPony |
Help with drying acetone [rquote=540790&tid=95829&author=AvBaeyer]
In my experience hardware store acetone (Home D ... |
5-10-2018 at 03:51 by: XeonTheMGPony |
[Next Page] |