| Search |
| [Next Page] |
Greasy NG ???
I tried nitrating glycerin (from pharmacy) with sulfuric acid (from drain cleaner) and ammonium nitr ... |
12-2-2005 at 05:52
by: Quince |
Regarding the use of home glassware as lab glassware
[u]Or, how I learned not to do it the hard way[/u]
So there I was, getting ready to boil some dra ... |
12-2-2005 at 03:00
by: Quince |
Diphoronepentaperoxide (DPPP)
So, is this thread dead or what? And what happened to Rosco, he hasn't been on the board for l ... |
11-2-2005 at 23:45
by: Quince |
Ratio H2SO4-NH4NO3 compared to H2SO4-HNO3
I'm going to put together a vacuum distillation setup, and I'm waiting for glassware from ... |
11-2-2005 at 23:43
by: Quince |
Ratio H2SO4-NH4NO3 compared to H2SO4-HNO3
I want to add a question to this: would the ammonium bisulfate in the solution be a problem when thi ... |
11-2-2005 at 04:09
by: Quince |
Alumina
High level overview of the setup is attached. The triangular shape of the plasma is necessary, as e ... |
10-2-2005 at 12:48
by: Quince |
Alumina
Detail showing the complex cathodes is attached. Thickness of wafers is under 1 mm, as are hole dia ... |
10-2-2005 at 12:45
by: Quince |
Alumina
Attached to this post is my power supply (this has already been built). I'm planning to add a ... |
10-2-2005 at 12:43
by: Quince |
Alumina
I need to make MHCD (microhollow cathodes). Pendulum electrons in the hole between the two conducti ... |
10-2-2005 at 08:44
by: Quince |
AN coating.
What about APAN putty? I managed to nitrate some cotton without distilling (AN+sulfuric acid; I don ... |
10-2-2005 at 05:24
by: Quince |
Alumina
This is more materials science than chemistry, but I thought I'd try here.
Is it possible to ... |
10-2-2005 at 03:03
by: Quince |
NH4NO3->nitric acid + ammonia
As someone mentioned distilling nitric acid from ammonium nitrate and sulfuric acid previously in th ... |
10-2-2005 at 02:16
by: Quince |
Plasma questions
I know this is a chemistry forum, but I'm wondering if anyone knows some plasma physics to help ... |
9-2-2005 at 22:18
by: Quince |
Primary
How does AP compare to HMDT as a primary? I failed to find both citric acid and hexamine in Vancouv ... |
8-2-2005 at 21:38
by: Quince |
Chemical "plants"
This is very neat (look at the pictures with the brown stuff growing in the test tubes):
http://www ... |
8-2-2005 at 01:53
by: Quince |
Bunsen fuel advice
Is it OK to use a camping-type propane burner on round-bottom boiling flasks? |
8-2-2005 at 01:50
by: Quince |
very high voltage
I have a lot of experience with MOTs, so I should comment here. There are several issues to address ... |
8-2-2005 at 00:45
by: Quince |
Cynmar Scientific Corporation
Any reasonably priced Canadian suppliers? I spent a couple of hours searching and gave up. Looks l ... |
7-2-2005 at 07:55
by: Quince |
Thermite Igniter?
[quote]Sorry to doubt you, but have you ever put an arc near powder?[/quote]
No, but close: I have ... |
5-2-2005 at 03:30
by: Quince |
Sulfuric, nitric, and peroxide from Rona
Mine had both 35% H2O2 and 90%+ H2SO4, but only 12% HN03. This hypochlorite, is this the stuff sold ... |
5-2-2005 at 03:24
by: Quince |
Sulfuric, nitric, and peroxide from Rona
General public. Will the others sell non-wholesale?
BTW, for those in Canada, is it possible to ... |
4-2-2005 at 07:53
by: Quince |
May I have been exposed by Ricin?
I was thinking of extracting abrin. I've seen the A.P. vines grow in the bush while I was in F ... |
4-2-2005 at 07:15
by: Quince |
Blue? Potassium chlorate/perchlorate?
I'm having some trouble with the search function. Searching for chlorate gives too many result ... |
4-2-2005 at 04:10
by: Quince |
To everyone using peroxides (important!)
I've used polystyrene. Softening styrofoam with acetone and stuffing a ball with acetone-wette ... |
4-2-2005 at 02:20
by: Quince |
Thermite Igniter?
Use an arc. Sufficient voltage is needed for dielectric breakdown of air (~3 kV/mm), but you need h ... |
3-2-2005 at 20:32
by: Quince |
| [Next Page] |
