Search |
[Next Page] |
Flame while making sodium metaphosphate I was trying to make sodium meta phosphate from NaH2PO4 by heating it in a old stainless steel cruci ... |
6-7-2018 at 18:35 by: Foeskes |
Invisible sodium So after reading some stuff obout the invisible sodium I decided to try to pull it out of the water ... |
29-6-2018 at 19:20 by: Foeskes |
Making Potassium metal by distillation with Al and KOH I decided to try it out and it worked! (I used a small butane brazing torch by kovea in a flower pot ... |
24-6-2018 at 07:14 by: Foeskes |
Winding flyback secondary? I'm trying to insulate between the layers since I can't get the oil to completely fill the gaps.
My ... |
11-6-2018 at 15:40 by: Foeskes |
Winding flyback secondary? The main reason for winding my own is because I need an actual flyback and it's not available locall ... |
11-6-2018 at 02:55 by: Foeskes |
Winding flyback secondary? Any tips on insulating the layers?
I tested the old one I wound and it arced over, turns out 2 laye ... |
10-6-2018 at 15:06 by: Foeskes |
Positive vs negative high voltage device? It's the direction of the diode. Some people mention that they notice that negative devices make lon ... |
6-6-2018 at 14:50 by: Foeskes |
Positive vs negative high voltage device? So I'm planning on making a voltage multiplier and a van de graff generator.
After doing some resea ... |
6-6-2018 at 07:04 by: Foeskes |
Elements with interesting properties Copernicium is predicted to be a gas at stp |
6-6-2018 at 06:56 by: Foeskes |
Winding flyback secondary? I have 0.1 mm magnet wire on hand is that too small? |
3-6-2018 at 03:47 by: Foeskes |
Winding flyback secondary? So after winding 1 layer you just bring the wire back to the begining and wind it again? |
2-6-2018 at 07:22 by: Foeskes |
Winding flyback secondary? So I currently have 4 flyback transformers(1 usd for 3 transformers). One of them isn't very good(no ... |
2-6-2018 at 06:12 by: Foeskes |
Nickel, Iron, and Molybdenum from Mu-Metal (Hard Drives) The last time I tried to separate Ni from Fe using ammonia failed horribly.
It did nothing but make ... |
28-5-2018 at 06:57 by: Foeskes |
Filling in hole in heat sink There are other heat sinks the same size for sale(with no holes), but I just have this one currently ... |
27-5-2018 at 10:25 by: Foeskes |
Filling in hole in heat sink So I bought a heatsink from a market and when I got home I realized I accidentally bought one for a ... |
27-5-2018 at 05:24 by: Foeskes |
Preparation of Holmium Oxide from Metal Wikipedia says that holonium oxide will react with ammonium chloride forming holonium chloride, ammo ... |
23-5-2018 at 21:30 by: Foeskes |
What elements have you isolated? I made cobalt with thermite before.
Crude and low quality manganese can also be made with MnO2 The ... |
19-5-2018 at 11:19 by: Foeskes |
Copper(II) formate mirror Honestly, I think hydrazine is probably worse than formaldehyde, in terms of toxicity.
Have you tri ... |
16-5-2018 at 17:47 by: Foeskes |
Synthesis of tetraethyl orthosilicate Let me guess... Aerogel?
I think you should vacuum distill it, so you can get a pure sample.
[Edit ... |
15-5-2018 at 07:44 by: Foeskes |
How to make Aluminum foam I wonder what's the solubility of co2 in aluminium. Apparently Aluminium foam is prepared by dissolv ... |
13-5-2018 at 15:41 by: Foeskes |
Copper(II) formate mirror So after watching nurdrage's video, I decided to make some copper formate.
My first test is I put a ... |
12-5-2018 at 00:56 by: Foeskes |
Making potassium formate from CO and KOH I cant think of any ways for the CO to get the extra O2 |
11-5-2018 at 06:04 by: Foeskes |
What's the most expensive substance you've bought? 10g of silver nitrate (per gram)
Silver metal (total cost) |
8-5-2018 at 16:48 by: Foeskes |
Potassium metal synthesis Alkoxide solubility and NaOH/Mg reaction mechanism This is off topic but, where did you get the magnesium and is it in a powdered form? |
8-5-2018 at 16:39 by: Foeskes |
Ferrous chloride crystals So I was making ferrous chloride and after all my iron dissolved I filtered the solution into a glas ... |
8-5-2018 at 06:05 by: Foeskes |
[Next Page] |