| Search |
| [Next Page] |
hydroxycobalamine as cyanide antidote?
I think some of the Israeli military stuff is already rated for HCN and isn't too expensive. |
27-10-2006 at 10:57
by: evil_lurker |
Sulfuric Acid Production: Revisited
I was thinking that
a) the sulfur would burn better and at a more easily controlled rate using p ... |
26-10-2006 at 23:13
by: evil_lurker |
"Bumping" Mg from MgSO4
It has to do with the electrical potential of the metals and yes it does work with certain other met ... |
26-10-2006 at 22:49
by: evil_lurker |
Sulfuric Acid Production: Revisited
It would be expensive, but what about pumping compressed O2 directly into the sulfur burner?
Then ... |
26-10-2006 at 22:28
by: evil_lurker |
hydroxycobalamine as cyanide antidote?
Gas mask or preferably an air line respirator connected to a remote supply. |
26-10-2006 at 19:42
by: evil_lurker |
Sulfuric Acid Production: Revisited
Ya'll check the good peeps out at www.postapplescientific.com
They'll hook ya up with 98% ACS gr ... |
25-10-2006 at 16:25
by: evil_lurker |
toluene --> benzaldehyde
There is only one problem with that... in the USA its actually harder to get acetic anhydride than b ... |
23-10-2006 at 23:39
by: evil_lurker |
Elemental Sodium?? I WANT IT!!
I haven't purchased any yet from these ppl, but think I have a source where I can get 6 pounds for a ... |
20-10-2006 at 11:02
by: evil_lurker |
bitter almond benzaldehyde
The Sommelet does work, but keep in mind that benzyl chloride and benzaldehyde's boiling points are ... |
18-10-2006 at 09:06
by: evil_lurker |
Failed fractional vacuum distillation.
I got lucky and snagged the vacuum regulator off of Ebay. I paid a little more than I wanted to for ... |
17-10-2006 at 23:52
by: evil_lurker |
bitter almond benzaldehyde
[quote][i]Originally posted by garage chemist[/i]
In Europe, at least in Germany, benzaldehyde can ... |
17-10-2006 at 18:59
by: evil_lurker |
Failed fractional vacuum distillation.
I'm working on getting a vacuum distillation setup as well.
From what I understand boiling stone ... |
17-10-2006 at 11:20
by: evil_lurker |
Making Tablets / Pills
Well if you had a tableter I'm sure the manufacturer could help you out.
But, I hope your not i ... |
15-10-2006 at 10:14
by: evil_lurker |
New element collecting site!
Hey didn't that Xenon flask come offa Ebay a few weeks ago?
Coulda sworn I seen one just like it. ... |
14-10-2006 at 15:16
by: evil_lurker |
WTB glassware
Ebay.
United Glass Tech.
'nuff said. |
14-10-2006 at 14:43
by: evil_lurker |
Distillation set questions
My personal preference it to work with stuff on the 5-10 mole scale because its a bit easier to get ... |
12-10-2006 at 00:34
by: evil_lurker |
toluene --> benzaldehyde
This should be looked at...
http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6THS-4K ... |
10-10-2006 at 20:57
by: evil_lurker |
convincing the parental unit
Not to be a party pooper, but I am on the OP mom's side on this one. Unless you live way out in the ... |
10-10-2006 at 18:16
by: evil_lurker |
nitroethane from distilling nitromethane?
I don't [i]think[/i] the n-butanol would matter that much as the imine formation and subsequent redu ... |
10-10-2006 at 14:27
by: evil_lurker |
Drying wet acetic acid.
IIRC if you have 10% water contamination you can distill approx 20% of the volume off and get pure g ... |
8-10-2006 at 17:23
by: evil_lurker |
nitroethane from distilling nitromethane?
Here's the problem with nitroethane.
Look at the BP's of the two materials:
Nitromethane BP 10 ... |
7-10-2006 at 10:26
by: evil_lurker |
How to add solids to a sealed reaction
Professional glass manufacturers make addition funnels.
The work by having sort of a spring where ... |
4-10-2006 at 16:46
by: evil_lurker |
I'm about to take the plunge and incorporate...
The entire problem ain't what you can sell and to who. Thats pretty much defined in the DEA lists an ... |
4-10-2006 at 16:23
by: evil_lurker |
How to power a heating mantle?
I'll admit that electricity is one of my weaknesses.
I'm wanting to get a heating mantle eventual ... |
4-10-2006 at 11:56
by: evil_lurker |
Glas-Col tube furnaces...
Well not exactly, but I did notice that Glas-Col will custom manufacture a heating mantle to your sp ... |
3-10-2006 at 13:06
by: evil_lurker |
| [Next Page] |
