Search |
[Next Page] |
methanesulfonic acid Could it possibly be synthesized from methylsulfonylmethane (MSM)? It is available as a joint supple ... |
26-8-2008 at 19:45 by: 497 |
From where are you? Alaska, USA. Its nice for reactions that require cooling |
25-8-2008 at 11:02 by: 497 |
Allstar Lab? This is very strange, a supplier that sells only the following chemicals: 1,4 butanediol, toluene, a ... |
24-8-2008 at 21:11 by: 497 |
Methyl Ethyl Ketone Peroxide In the conditions you just gave there would still be plenty of water present. Maybe less than normal ... |
24-8-2008 at 17:00 by: 497 |
Methyl Ethyl Ketone Peroxide As far as I know the reaction requires acidic conditions to proceed. Then again I've never heard of ... |
24-8-2008 at 12:02 by: 497 |
Methyl Ethyl Ketone Peroxide I don't see why that wouldn't work as long as you neutralized all the acid. That would take quite a ... |
21-8-2008 at 17:40 by: 497 |
Propylene (oxide) synthesis Its fine if you want to derail it. The thread was intended for anything involving propylene and/or p ... |
20-8-2008 at 01:33 by: 497 |
Propylene (oxide) synthesis Until I knew it would work, I would not attempt a charge quite that big. If it failed to detonate it ... |
19-8-2008 at 20:41 by: 497 |
Propylene (oxide) synthesis I wasn't involved in that, and I agree it is not really mad science. One of them (there were actuall ... |
19-8-2008 at 11:02 by: 497 |
Propylene (oxide) synthesis @ Squirrel
What are you talking about? Toxic compared to what? All the MSDS reccomends is safety g ... |
18-8-2008 at 23:12 by: 497 |
Regarding the use of home glassware as lab glassware I've boiled down battery acid in a 1 L bomex flask at least 10 times with no problems. At first I tr ... |
18-8-2008 at 11:40 by: 497 |
Propylene (oxide) synthesis Yes I know its nasty stuff... 200 ppm for 8 hours begins to be toxic IIRC. I'm also considering 1,2 ... |
18-8-2008 at 10:51 by: 497 |
Propylene (oxide) synthesis @ MJP Yes someone already said propylene was available at welding stores. I have taken that into c ... |
18-8-2008 at 09:49 by: 497 |
Propylene (oxide) synthesis I read a paper about the decomposition products of PP a while ago. It resulted a soup of maybe 30 di ... |
17-8-2008 at 13:41 by: 497 |
Propylene (oxide) synthesis I wonder if it would be possible to produce the HCl in situ with NaHSO4 and NaCl(or any other suitab ... |
16-8-2008 at 09:45 by: 497 |
Propylene (oxide) synthesis Thank you, I looked for the procedure on google books and was unable to find any that were viewable. ... |
4-8-2008 at 14:17 by: 497 |
Propylene (oxide) synthesis Thanks Polverone, I will do that.
A good patent on continuous vapor phase alchohol dehydration is U ... |
2-8-2008 at 18:03 by: 497 |
Propylene (oxide) synthesis I like that idea Polverone, it just requires bubbling HCl through hot propylene glycol? Do you know ... |
2-8-2008 at 13:08 by: 497 |
Propylene (oxide) synthesis Hmm yes that may be the best option. Yeild will probably be worse with low pressure but that doesn't ... |
2-8-2008 at 04:29 by: 497 |
Propylene (oxide) synthesis What is a practical OTC source of propylene? There are many options that I see, few look usable thou ... |
2-8-2008 at 04:06 by: 497 |
What reagent would you like to see an illustrated guide for? Aww come on! Just plain old potassium???
Really that would be quite interesting. What do you p ... |
1-8-2008 at 11:00 by: 497 |
What reagent would you like to see an illustrated guide for? Personally I would most like to see 1,2 Butylene Oxide. Another big one is DCM. While you're at it T ... |
1-8-2008 at 02:53 by: 497 |
Methyl Ethyl Ketone Peroxide I figured you'd like that. Lets see, I'll have to dig up the notepad file I wrote
up to keep thin ... |
19-7-2008 at 01:26 by: 497 |
Preparation of elemental phosphorus So today I went to the store in search of some NaPO3. The only Calgon they had was non phosphate cra ... |
19-7-2008 at 01:14 by: 497 |
Methyl Ethyl Ketone Peroxide Well I'll let you try the DBSP in blender idea for yourself, considering the fairly high percent NG ... |
19-7-2008 at 00:08 by: 497 |
[Next Page] |