Search |
[Next Page] |
New melt-cast secondary explosive Professionals usually test 1.00 g of the substance under investigation. The smaller cavity is 6/8mm ... |
11-11-2022 at 08:09 by: Laboratory of Liptakov |
New melt-cast secondary explosive Best method for CHP: https://www.youtube.com/watch?v=F94UpYRczkc
Basic laboratory preparation of 5g ... |
10-11-2022 at 14:00 by: Laboratory of Liptakov |
New melt-cast secondary explosive Your substance still has a long way to go. I look forward to the brisance test results. If it turns ... |
9-11-2022 at 14:33 by: Laboratory of Liptakov |
New melt-cast secondary explosive I estimate , that H2SO4 53.94g is counted as 100% H2SO4....?....It is approx 31% concentration of H2 ... |
8-11-2022 at 00:59 by: Laboratory of Liptakov |
New melt-cast secondary explosive The cavity is always perpendicular. The steel sheet is a standard sheet, or a U or D profile, 2 - 3 ... |
6-11-2022 at 12:25 by: Laboratory of Liptakov |
Det Cap Strategies For laboratory testing and especially reliable DDT with exact results is best steel cavity 6/8 x 50 ... |
6-11-2022 at 07:39 by: Laboratory of Liptakov |
Det Cap Strategies Proof of a good detonator function is the round and precise hole in the steel plate. Wood chips and ... |
6-11-2022 at 02:09 by: Laboratory of Liptakov |
New melt-cast secondary explosive Great video, we thanks......
12,4g is better than nothing.
The test in a solid cavity and th ... |
6-11-2022 at 01:40 by: Laboratory of Liptakov |
New melt-cast secondary explosive [rquote=678245&tid=159048&author=Hey Buddy]
But I understand the complaints, I estimated ... |
5-11-2022 at 06:56 by: Laboratory of Liptakov |
New melt-cast secondary explosive My experience is that many amateur chemists try to simplify the original procedure. And that immedia ... |
5-11-2022 at 06:48 by: Laboratory of Liptakov |
New melt-cast secondary explosive Oh yes, I understand. We thanks for your research. Procedure looks pretty easily. For RDX is necess ... |
5-11-2022 at 06:13 by: Laboratory of Liptakov |
New melt-cast secondary explosive So the excess of both NQ and NaNO2 over hexamine is important. Apparently, 68 ml of HCl is probably ... |
5-11-2022 at 00:31 by: Laboratory of Liptakov |
New melt-cast secondary explosive Intersting description and procedure.
14.5g NQ + 68ml HCl +21g Hex + 50g NaNO2. It is approx 154 g ... |
4-11-2022 at 13:05 by: Laboratory of Liptakov |
Any reaction between AL and ETN? It is very difficult to construct in amateur practice NPED (reliable NPED) only on the basis of ETN ... |
31-10-2022 at 10:26 by: Laboratory of Liptakov |
Any reaction between AL and ETN? The method burning - boiling ETN on alu foil can works pretty reliable. But exact time of start is i ... |
28-10-2022 at 01:17 by: Laboratory of Liptakov |
SWL confirmation With sucessful was tested stability of Lithex, respectively SWL, which is Lithex + CuO as catalyseur ... |
24-10-2022 at 10:26 by: Laboratory of Liptakov |
LL8 from Dr. Liptakov Instead nichrome wire is possible use scourer on dish. On picture is special Wi - Fi scourer. Surfac ... |
23-10-2022 at 01:34 by: Laboratory of Liptakov |
Replicating Commercial EBW Gold Connection using LED Maybe no one has tried it yet. Remove the silicone and apply cast ETN. And connect to car acumulator ... |
15-10-2022 at 12:27 by: Laboratory of Liptakov |
Help with CHP This is what a clean and dry TACP should look like. It also contains a darker grain, but that's not ... |
25-9-2022 at 07:14 by: Laboratory of Liptakov |
Help with CHP A photograph of the slightly wet and aspirated (Buchner) TACP will be required for assessment. It sh ... |
20-9-2022 at 23:53 by: Laboratory of Liptakov |
Help with CHP Better will do it CHP as " Dry way". Thus mixing 4,3g TACP + 0,3g HMTA + 0,3g NH4ClO4. As dry powder ... |
20-9-2022 at 12:36 by: Laboratory of Liptakov |
Help with CHP Best is the wire 1 - 2 mm of diameter. 10g of wire is enough for 25g AP. But for attempt can be use ... |
20-9-2022 at 11:00 by: Laboratory of Liptakov |
Help with CHP Firstly is necessary prepare pure TACP. CHP is else and second step. Best method is Liptakov conver ... |
20-9-2022 at 06:45 by: Laboratory of Liptakov |
LL8 from Dr. Liptakov ManyInterests ....You ultimately forced me produce detonator........ (Only
specimen without any c ... |
16-9-2022 at 09:08 by: Laboratory of Liptakov |
LL8 from Dr. Liptakov Basic construction is: 1) Output segment 300mg CHP on 50 - 100 Kg in the vise. 2) Next filling is ... |
6-9-2022 at 00:09 by: Laboratory of Liptakov |
[Next Page] |