Search |
[Next Page] |
Diy heating mantle, aka the coffee can heating mantle. Hi everyone i was looking around for a heating mantle online when i saw these mantle liners for $ 14.58 us
each.[url=http://www.ebay.com/it ... |
2-8-2016 at 22:28 by: nux vomica |
6 * 100ml heating mantle UK eBay I have put a starting bid, If it wins I'll probably chop it up
but others may find this heating unit useful
6x individually controllable 100ml heating mantles
http://www.ebay.co.uk/itm/ ... |
11-7-2016 at 05:42 by: Sulaiman |
Bulk/commodity (snow melt type) CaCl2 excellent for dessicant after high temp heating ... e is so much difference in performance.
I'll post some pics and results of some testing. When heating over wood flame, there is a very little bit of carbon attracted to the
salt but as this isn' ... |
7-7-2016 at 18:31 by: RogueRose |
heating wire Please recommend alloy to use as a resistive heating wire.
I tried fat Ni-Chrome wire, from socket. It melted on halfs.
In the place were t ... |
4-7-2016 at 15:57 by: Romix |
HElP PLEASE! heating Mantle trouble I bought a heating mantle 120 volts with a temperature control but when i
plug it in, the fabric browns and ... |
3-7-2016 at 16:05 by: htemptationtreats5 |
heating mantle with heat controller Quick question, would a heating mantle with built in heat control still need a variable autotransformer? ex. variac can it b ... |
10-6-2016 at 14:53 by: Pooshamp |
Building a heating Element? I've recently been thinking about building a high-temperature nichrome heating element for those reactions that require elevated
temperatures, but I'm in way over my head ... |
30-4-2016 at 19:45 by: elementcollector1 |
new insulation for a heating mantle - aus I was a bit divided on where to post this -- bad days in the lab, short questions... Decided on a n ... |
23-4-2016 at 02:10 by: j_sum1 |
High current low voltage heating element ... beaker or tube to at least 1000C. I considered using a few turns of steel strip or fence wire as a heating element either external or
in the beaker. Possibly a resistance heated boat.
So some expe ... |
11-4-2016 at 22:17 by: wg48 |
heating tapes I'm looking into buying a heating tape that has a high temperature range so I can run a lot of different future experiments, b ... |
29-3-2016 at 18:16 by: Chiron |
Micro heating element? I am looking for a tiny heating element that can reach 1000°+, something on the order of 2-3mm wide and 5mm long. I want to ... |
28-3-2016 at 02:48 by: Joe Skulan |
in search for a reflux apparatus with heatingmantle HI,
Anybody from Holland that is elling a reflux apparatus with heating mantle.
Iam looking for a complete set.
Thx,
Victory |
5-3-2016 at 07:05 by: victory |
heating mantles from India Ebay is replete with heating mantles from India. As an example, a 1L mantle with built-in temperature control, 1L size, w ... |
3-2-2016 at 18:19 by: CharlieA |
Metal Shot heating Bath I have made a couple of attempts at creating a heating mantle and have so far been unsuccessful. So I was wondering what kind of metal
shot might m ... |
27-1-2016 at 22:27 by: JJay |
tin(ii) chloride heating in air intermediate formation What are the intermediate forms when heating SnCl2 in air up to 600 degree?
what is first decomposition intermediate at 160-170 degree ... |
14-1-2016 at 22:59 by: ashish |
heating mantle turning yellow/red upon heating? I haven't used a heating mantle in a while, but I found one in storage. When I went to test it by boiling some water ... |
5-1-2016 at 13:47 by: RareEarth |
Table salt heating bath? ... , maybe around 200 or 300°C) I already own a hotplate stirrer and I don't want to spend money on a heating mantle so I considered using
heating baths.
Apparently people have used sand, oils (cooki ... |
29-12-2015 at 06:54 by: Romain |
heating a round bottom flask with a hotplate? I have an issue - I need to heat a 1000mL round-bottom flask with a flat hotplate. I don't have a heating mantle, and I don't want to
spend the money to buy or even make one from premade heating tap ... |
1-11-2015 at 13:54 by: Upsilon |
heating for Magnetic Stirrer ... heat output, and I haven't found a manual anywhere online.
I am thinking about adding additional heating to it using a mug immersion heater (in a bath of water or oil, with stirring) and a dimmer
s ... |
16-10-2015 at 12:22 by: JJay |
heating mantle/variac Hello all, first post after months of lurking. I bought glassware,a variable temp heating mantle with stirrer and a variac. Total novice
at chemistry and am only looking to distill e ... |
4-10-2015 at 06:11 by: magnet |
Drying heating oil Okay, here we enjoy a practical application of chemistry.
I want to remove the water, if any, fro ... |
25-9-2015 at 12:34 by: CaptainPike |
heating NaHCO3 solution If i heat solid NaHCO3, it decomposes to Na2CO3, CO2 and H2O.
What happens if I heat up an aqueous ... |
22-9-2015 at 00:37 by: mintreina |
HCN via acidification & heating of aq. K3Fe(CN)6 Following Dan Vizine's notes, backed up by mentions I've since found in texts, I've tried this react ... |
28-8-2015 at 16:52 by: lysander |
large vessels: best way of heating and stirring ? ... y 5 liter is the max I'd ever want to deal with)sizes. But to do this I will need to buy the needed heating and stirring apparatus as
well. What route makes the most sense as a amateur/ student? What ... |
9-7-2015 at 14:27 by: Funkerman23 |
[Next Page] |