12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Biological oxidation of ammonium/amines
First of all, has anyone here tried this? I know it was done quite often before the Ostwald process et al for fixing nitrogen and ultimately
producing nitrates.
Yes, I'm seriously considering this...
My plan:
Provide a substrate of say 5 pounds sand, 1 pound clay (I don't want to use too much clay, the stuff I have on hand is very fine, a ball clay),
some dirt or manure to culture, anything else?
As the nitrogen (sourced from say, urea) is oxidized to nitrate ions, pH will fall, but so as not to kill the bacteria, an insoluble base is demanded.
Local dolomite, crushed and/or powdered will provide the cations, releasing CO2 as the reaction progresses.
After many days/weeks/months of folding air in, water will be added, decanted and potassium nitrate precipitated with help from some potassium
chloride. The remaining sludge will be oxygenated and fed more urea to continue the process.
Overall:
(NH2)2CO + CaCO3 + 9/2 O2= Ca(NO3)2 + 2CO2 + 2H2O (or magnesium as the case may be)
So that's ah, 1 kilo of dolomite (assuming no hydrates and good purity) for every 600 grams of urea, producing 1.6kg nitrate at full yield.
Comments?
Hopefully, it won't be too stinky...
Tim
|
|
|
Esplosivo
Hazard to Others
Posts: 491
Registered: 7-2-2004
Location: Mediterranean
Member Is Offline
Mood: Quantized
|
|
I was already thinking of the process previously. The idea first came from Theoretic, on the thread Creation of nitrates from non-nitrates.
As I described in my post on that thread my intention is to isolate nitrifying bacteria (I'm aiming at Nitrosomonas and
Nitrobacter - most common). This is quite easily done by collecting soil samples from places where water is present mostly all-year-round
(rare thing where I live, but I know of a place). To the soil samples a mixture of nutrient media with varying concentrations of ammonium salts and
another of nitrites will do the trick. Certain large conc. of ammonium and nitrite salts will tend to eliminate other microorganisms. After small
colonies are formed, streak-plating will follow (you can carry this out on some jelly with added Vitamins and nutrients, or else on agar media). After
isolation, the two species will be embedded in alginate to immobilise them. The beads can then be placed in PVC pipes, through which an ammonium salt
solution is circulated (containing some other nutrients) and thoroughly oxygenated. I was thinking about adding a certain concentration of calcium
hydroxide periodically (although I think other bases may also be used).
I have what I need. What is keeping me from starting this project is the fact that I don't have any idea on how to sterilize the air which must
be bubbled through the solution. (Such bacteria need lots of air for oxidation of the ammonium and nitrite salts.) I was tempted to bubble the air
through chilled absolute ethanol, although most microorganisms will still manage to pass most (I hope) will perish there.
I hope this helps.
Theory guides, experiment decides.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Thanks, I might try peat for the culture or substrate. LMK how the petri dish stuff goes...
Tim
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
You may find this useful. It’s a guide on nitre beds from the civil war era.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Thanks, I've read a page very similar to that (almost verbatim, actually) as well. All those animal and vegetable remains must have a terrible
smell, we don't have much backyard so I'd probably have to do this in the basement. That's why I want to try to optimize it and use
purer materials such as urea (which I believe is still quite available, in lieu of AN these days).
Tim
|
|
|
Pyridinium
Hazard to Others
Posts: 258
Registered: 18-5-2005
Location: USA
Member Is Offline
Mood: cupric
|
|
| Quote: | Originally posted by Esplosivo
As I described in my post on that thread my intention is to isolate nitrifying bacteria (I'm aiming at Nitrosomonas and
Nitrobacter - most common). This is quite easily done by collecting soil samples from places where water is present mostly all-year-round
|
Or you could get hold of some water from an aquarium that's been left to stagnate with the pump and filters off for a while. I've read that
the ones responsible for nitrate production in there are Nitrospira and Nitrosomonas. I read on another site that some shrimp living in a sea-water
tank can also help the production of nitrate. Not sure why.
There are buffers made for aquaria that won't kill these bacteria. I found one from a google search that is pH 8.3 and is used for this purpose.
It's called Waterlife. This could keep your pH from dropping due to the consumption of ammonia.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Well I picked up some urea today (no one told me it smells, I assumed it was a hard crystalline substance!  ), mixed 300g with 700g CaCO3 (200g more than stoichiometric, of local limestone/dolomite broken down to -2+8 mesh),
an approximate double volume of vermiculite (coming to around 120g), a few handfuls of sand and an unmeasured amount of water (enough to wet it). I
then added some sludge from the ground salt leachate solution which has been sitting around for a while, hopefully as a culture. I will stir and fluff daily and guesstimate the
progress as it goes, based on dissolution of the limestone and increase in weight. If no progress is had in say, a week, I'll add some fresh
dirt.
Tim
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Update:
On disturbing, it makes the bubbly sound of CO2 bubbles breaking, so it must be working. 
No sign of wear on the limestone bits yet.
Tim
|
|
|
Quince
National Hazard
Posts: 773
Registered: 31-1-2005
Location: Vancouver, BC
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by PyridiniumOr you could get hold of some water from an aquarium that's been left to stagnate with the pump and
filters off for a while. I've read that the ones responsible for nitrate production in there are Nitrospira and Nitrosomonas. I read on
another site that some shrimp living in a sea-water tank can also help the production of nitrate. Not sure why.
There are buffers made for aquaria that won't kill these bacteria. I found one from a google search that is pH 8.3 and is used for this purpose.
It's called Waterlife. This could keep your pH from dropping due to the consumption of ammonia. |
I have an aquarium, and I can tell you that with every weekly partial water change, I'm throwing out three gallons of water with 50 ppm nitrates.
You can isolate a huge brown mass of nitrifying bacterial colonies by wringing out the filter sponges, or using a gravel-vac type syphon on the
bottom. Most aquarium colonies are established by bacteria that initially come from the air (the tank is usually cycled to achieve stable levels
BEFORE the fish are added). If you don't have an aquarium, you can buy nitrifying bacteria in a bottle (such as Cycle). There are other things
in that solution added to help these bacteria outcompete less wanted ones.
The optimal way to get these guys to work is trickle filters (such as those that use sand or bioballs as a medium), because of the large surface area
exposed to a constant flow, and large water/air interface. There is no sterilization needed.
Here's an example that will give you the idea:
You can build a container or use a small old aquarium, and then you just need a cheap water pump to suck water from the bottom and pour it on top.
Bioballs can be found cheaply and work better than sand (and also the grid keeping them above the sump doesn't have to be extremely fine, as sand
would tend to fall through).
[Edited on 19-6-2005 by Quince]
\"One of the surest signs of Conrad\'s genius is that women dislike his books.\" --George Orwell
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Well, it's been a month. I've got a bucket with rounded balls of claylike material (I've been rolling it around for aeration). Any
suggestions on 1. isolating remaining urea 2. isolating any calcium nitrate 3. any side products?
Tim
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
So no suggestions whatsoever?
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
Did you do a test on the nitrate content?
If not, I'd suggest to see whether nitrate was produced in the first place. I seem to remember one test was with some iron complexes.
Also, isn't nitrate produced in horse manure? Why not grinding this up a little and mixing it thoroughly with your mixture, to let it sit outside
for a long time, while keeping it wet?
Any unreacted CaCO3 and manure bits can be filtered off. HOw to separate the nitrate and urea from each other is more tricky. KNO3 isnt that much
soluble, so that may be a possibility.
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Well as I mentioned, the mixture started bubbling some after I added some sludge from the ground leachate solution, so it probably worked. If not,
I'd like to seperate the unused urea (and if possible, without destroying the bacteria and substrate as well, for convienience) and what calcium
nitrate has formed, so as to figure a rate of progress.
FWIW, the mixture has formed some fine, hairy, acicular efflorescence between the nodules.
I'll try a natural substrate such as "black dirt", manure and whatnot next, if the yield on this method is low.
Tim
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
I wetted it down, settled out the vermiculite, added some dirt, and a circulating/bubbling pump since it's now in liquid form. It smelled
strongly of ammonia (say, how fast and in what environment does urea hydrolyze to ammonium carbonate anyways?), so I added some acid (HCl and H2SO4)
until it smelled again like plain urea. Bubbling ensued, CO2 I would guess. Not from the limestone chips in the bottom.
Now it's keeping a constant foam, I'm *guessing* it's got something growing and pooping in there... I was going to take a sample some
day, add muriate of potash, boil then near freeze it to see if anything falls out. What's the solubility of KNO3 at 0C anyway?
Tim
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Bump.
So in case anyone was wondering, it looks like I never mentioned what happened. After all the blah and hydrolysis, I crystallized the solution,
resulting in blocky, large, clear crystals (I'm guessing ammonium sulfate or so), followed by (trying to remember) dendritic crystals I think
(ammonium something?), blue or green tint (complexed trace metal impurity?), and very cold when dissolved in water. But not cubic like ammonium
chloride, of which some did show up later, in green (iron impurity?) cubes which don't really melt but do boil a lot on heating. Also some blue
specks that seperated I think from the dendritic crystalline material after recrystallizing a few times, don't know what those are, lastly some white,
translucent, easily crystallized salt that I haven't analyzed; plus some sludge that is too little to bother crystallizing.
My newest attempt (a month or two old) involves composting grass clippings, urea and dolomite gravel. I've kept it under shelter, so it doesn't get
wet but has free access to air. At first it wasn't doing much, but I think for the last month it's been chronically moist, which I can only assume
means there's something hygroscopic present. It smells of some nasty decomposition, so something's going on, at the very least. The sludge is dark,
more or less black. I suppose I'll analyze it when the weather starts getting cooler.
Tim
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Some organisms produce urease, which hydrolises urea to ammonia and carbon duioxide rather quickly. As both products are gases, they tend to soon
leave the scene, removing your nitrogen source.
This gives a decent description of aquarium nitrifying bacteria
http://www.bioconlabs.com/nitribactfacts.html
http://www.pwri.go.jp/eng/kokusai/conference/komori010825.pd...
They only need inorganic nutrients, not having organics around reduces nitrate lose through denitrifying bacteria.
These bacteria need a lot of oxygen, grow slowly, are picky about pH, and so on. Rather than throwing all the urea at them at once, I suspect you
would get better yields by applying small amounts daily in dilute solution.
The aquarium route might work better than a wad of rotting stuff, even more a tank filled with coarse, sharp edged sand that has aerated nutrient
solution pumped over it. The bacteria grow on the surface of the sand, so the more surface the faster the overall conversion.
There is a limit to how much nitrate will be tolerated. In the old methods of nitrate production, the piles of rotting matter either lost the salts
through oozing out the bottom, or evaporation on one or more surfaces - concentrating the inorganic as a crust. There's no easy way to pull just the
nitrates out. I think that you will end up removing a bit of liquid daily to let evaporate, and replace it with water containg the proper amount of
urea and phosphate.
|
|
|
Quince
National Hazard
Posts: 773
Registered: 31-1-2005
Location: Vancouver, BC
Member Is Offline
Mood: No Mood
|
|
I keep throwing out good deals of nitrates when I change aquarium water, but I don't see any efficient way of extracting given the low concentration
(since I keep fish, I can't allow the water to reach more than 50 ppm nitrate content).
\"One of the surest signs of Conrad\'s genius is that women dislike his books.\" --George Orwell
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
