Acetylene

From Sciencemadness Wiki
Jump to: navigation, search
Acetylene
Solid acetylene subliming by ChemicalForce.jpg
Solid acetylene, subliming at room temperature
Acetylene.png
Names
IUPAC name
Acetylene
Preferred IUPAC name
Acetylene
Systematic IUPAC name
Ethyne
Properties
C2H2
Molar mass 26.04 g/mol
Appearance Colorless gas
Odor Slight ethereal odor
Density 1.097 g/cm3
Melting point −80.8 °C (−113.4 °F; 192.3 K)
Boiling point −84 °C (−119 °F; 189 K) (sublimes)
1.2 g/L (25 °C)
Solubility Soluble in acetone, benzene, chloroform, diethyl ether, dimethylformamide
Slightly soluble in glacial acetic acid, carbon disulfide, ethanol
Vapor pressure 44.2 atm (20 °C)
Acidity (pKa) 25
Thermochemistry
201 J·mol−1·K−1
226.88 kJ/mol
Hazards
Safety data sheet PRAXAIR
Related compounds
Related compounds
Ethene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Acetylene (or ethyne) is a flammable gas used in welding and making explosives. It contains a triple bond between two carbons in its structure, making it the simplest alkyne, and has the formula C2H2.

Properties

Chemical

Acetylene burns in oxygen with a very hot and bright flame, with a temperature of 2534 °C at atmospheric pressure. The temperature can be higher if nitrous oxide is used.

C2H2 + 5/2 O2 → 2 CO2 + H2O
C2H2 + 5 N2O → 2 CO2 + H2O + 5 N2

It will ignite on contact with chlorine at standard conditions.

Acetylene is used to make the explosives copper(I) acetylide and silver acetylide. These are both rather sensitive and moderately powerful primary explosives.

C2H2 (g) + 2 CuCl (s) → Cu2C2 (s) + 2 HCl (g)
C2H2 (g) + 2 AgNO2 (s) → Ag2C2 (s) + 2 HNO3 (aq)

Formaldehyde will react with acetylene gas in water, in the presence of copper(I) acetylide to form 1,4-butynediol.[1]

Acetylene reacts with the amides of alkali metals while in ammonia solution to form water-soluble alkali metal acetylides.

Physical

Acetylene cannot exist as a liquid at any temperature under normal pressures, and it is extremely inadvisable to pressurize the gas due to the high risk of an explosion. Industrially, cylinders of acetylene are filled with a porous inert sponge to avoid having high pressures of the gas. This sponge is filled with acetone or dimethylformamide, in which the the gas dissolves.

Mixtures of acetylene and air are extremely explosive, with acetylene volumes from 2.6% to 80% capable of detonating.

While acetylene itself may not have an odor, any cylinder of the gas will contain a small amount of an odorant, and the gas generated from calcium carbide and water always has a strong smell due to impurities.

Availability

Cylinders of acetylene are available generally at welding supply stores. There is a consumer use for cylinders of this gas.

Preparation

In a home chemistry setting, acetylene is generated by the reaction of calcium carbide and water.

CaC2 + 2 H2O → Ca(OH)2 + C2H2

The calcium carbide used is often a low grade, so it will produce a variety of other gases such as hydrogen sulfide and phosphine.

To increase the purity of acetylene from calcium carbide, the gas can be lead through a wash bottle containing sodium hydroxide, then plain water to remove any sodium hydroxide.

Projects

Copper Acetylide - Chemistry-chemists.com

Handling

Safety

Explosions of acetylene can be very powerful. It is easily capable of detonation when pressurized, and is quite shock sensitive, meaning shock waves generated from explosives could set it off. Fuel/air mixtures can ignite very easily and will detonate or burn very hot and bright.

Although unlikely, acetylene can form very sensitive explosives on contact with copper, so the use of copper piping is inadvisable.

While generally not terrible toxic when pure, if generated from technical-grade calcium carbide, many other gases toxic like hydrogen sulfide or phosphine may be produced.

Storage

Acetylene is stored commercially in cylinders, where it is dissolved in acetone or dimethylformamide (DMF), contained in a gas cylinder with a porous filling (Agamassan).

A new method was developed in 2009, where acetone is stored in a metal-organic framework (MOF), a lattice-like structure made of copper oxide and benzene.[2]

Disposal

Acetylene can be safely released in the atmosphere or burned.

References

  1. Jump up https://www.youtube.com/watch?v=ljgtaEO3OVY
  2. Jump up http://pubs.acs.org/doi/abs/10.1021/ja904782h

Relevant Sciencemadness threads