Rubberware
 |
This article is a stub. Please help Sciencemadness Wiki by expanding it, adding pictures, and improving existing text.
|
The term rubberware (or rubber ware) is used to describe any lab item made of rubber, either natural or synthetic.
Contents
General
Rubberware objects are commonly used for tubing, pipette dropper bulb, etc.
Common types of rubber used for such items are silicon rubber and natural rubber. Petroleum-based rubber is almost never used, as it lacks resistance to most common solvents. Latex gloves are commonly used as PPE.
Rubber items are sensitive to oxidation, either from oxidizing solutions or exposure to concentrated/pure oxygen or ozone, which causes it to crack.
Basic rubberware
Closures
Similar to rubber stoppers, rubber closures are more often encountered in medical vials and bottles.
Dropper bulbs
Commonly used in pipettes to draw/release liquids. Come in two forms, one thin and translucent and one thick and opaque.
Filter cones
Generally come in 5, 6, 7 or 8-piece set, they are commonly used when vacuum filtering through a funnel.
Flask stand
Used to hold round-bottom flasks, though flat models for holding Erlenmeyer flasks are also available.
Latex gloves
Latex gloves are used as PPE, but aren't suitable when handling strong solvents. They are more commonly used in biology or when washing glassware.
Pipette bulb
Similar to dropper bulbs, they are used in pipettes to draw/release liquids. There are many types of bulbs: Some types are a simple rubber bulb without any squeeze valves; other types have a bulb connected to a tube which has a squeeze valve; another more common type is a rubber bulb connected to a T-shaped tubing and have three squeeze valves.
Policeman
Rubber policemen are scalpel-like rubber scrapers, used to remove solid compounds from the crystallization dishes.
Stopper
Made of either natural rubber, silicon rubber or neoprene, stoppers are used to seal many types of glassware, such as flasks or test tubes. Some stoppers have holes, which allow for tubing.
Tubing
Natural or silicon rubber is used for crating vacuum or to carry cooling fluids in condensers. Rubber tubings are rarely used to carry reagents as they lack good chemical resistance.
Special rubberware
Flask holder
Used for holding flasks and beakers that contain corrosive chemicals where gloves aren't sufficient.
Septa
Often used in air-sensitive reactions, can be used to seal flask openings, commonly used in multiple-neck flasks.
Vacuum filtration cap
Such rubber caps, as this one are used when vacuum filtering thick suspensions. They are used to increase the pressure inside the suspension solution chamber.
Safety and handling
Rubber items are sensitive to UV light and air, and will degrade over decades.
