Copper(I) chloride
| Names | |
|---|---|
| IUPAC name
Copper(I) chloride
| |
| Other names
Copper monochloride
Cuprous chloride | |
| Properties | |
| CuCl | |
| Molar mass | 98.999 g/mol |
| Appearance | White solid |
| Density | 4.14 g/cm3 |
| Melting point | 423 °C (793 °F; 696 K) |
| Boiling point | 1,490 °C (2,710 °F; 1,760 K) (decomposes) |
| 0.47 g/100 ml (20 °C) | |
| Solubility | Soluble in aq. ammonia, conc. HCl Insoluble in acetone, ethanol |
| Vapor pressure | ~0 mmHg |
| Hazards | |
| Safety data sheet | Sigma-Aldrich |
| Flash point | Non-flammable |
| Lethal dose or concentration (LD, LC): | |
| LD50 (Median dose)
|
140 mg/kg |
| Related compounds | |
| Related compounds
|
Copper(II) chloride |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| Infobox references | |
Copper(I) chloride, or cuprous chloride, has the chemical formula CuCl. It is a white, almost insoluble salt which is slowly oxidized by air.
Contents
Properties
Chemical
CuCl is almost completely insoluble in water. It does however form complexes and dissolve in concentrated hydrochloric acid and ammonium hydroxide, as well as in cyanide and thiosulfate solutions.
Physical
Pure samples of copper(I) chloride appear as white, dense, cubical crystals. As it is slowly oxidized in air, older samples may appear dirty green or brown.
Preparation
Copper(I) chloride can be prepared by reduction of copper(II) ions in presence of chloride ions. Possible methods include bubbling sulfur dioxide through an aqueous solution of copper(II) chloride, or heating a solution of copper sulfate, sodium chloride and ascorbic acid. It can also be produced by boiling copper(II) chloride and copper metal in hydrochloric acid.
Projects
Copper(I) chloride can be used to make copper oxychloride by oxidation in air.
The primary explosive copper(I) acetylide is made by passing acetylene gas through a solution of CuCl in aqueous ammonia.
Handling
Safety
Cuprous chloride is irritant and corrosive to eyes and skin. Protection clothing should be worn when handling it.[1]
Storage
CuCl should be kept in sealed containers, away from oxygen. Schlenk flasks are a good storage container.
Disposal
CuCl can be oxidized with oxygen or hydrogen peroxide to the more soluble CuCl2, which can be reduced to metallic copper with a more reactive metal, such as iron or zinc.
References
Copper(I) chloride, Wikipedia (http://en.wikipedia.org/wiki/Copper%28I%29_chloride).
