Difference between revisions of "Copper"

From Sciencemadness Wiki
Jump to: navigation, search
Line 1: Line 1:
−
[[File:Electrolytic copper.jpg|thumb|Dendritic copper crystals made by electrolysis.]]
+
{{Infobox element
−
'''Copper''' is a transition metal with the symbol Cu and the atomic number 29. It is a widely available commodity and can be obtained in numerous forms. It is an amphoteric metal that exists in two common oxidation states, +1 and +2, and can also exist in a +3 and a +4 state. Copper itself is chemically resistant, but its oxidation states show tendencies to react. It can be plated out of solution or replaced by a more active metal.
+
<!-- top -->
 +
|image name=Electrolytic copper.jpg
 +
|image alt=
 +
|image size=300
 +
|image name comment=Dendritic copper crystals made by electrolysis.
 +
|image name 2=
 +
|image alt 2=
 +
|image size 2=
 +
|image name 2 comment=
 +
<!-- General properties -->
 +
|name=Copper
 +
|symbol=Cu
 +
|pronounce=
 +
|pronounce ref=
 +
|pronounce comment=
 +
|pronounce 2=
 +
|alt name=
 +
|alt names=
 +
|allotropes=
 +
|appearance= Reddish metal
 +
<!-- Periodic table -->
 +
|above=
 +
|below=
 +
|left=
 +
|right=
 +
|number=
 +
|atomic mass=
 +
|atomic mass 2=
 +
|atomic mass ref=
 +
|atomic mass comment=
 +
|series=
 +
|series ref=
 +
|series comment=
 +
|series color=
 +
|group=
 +
|group ref=
 +
|group comment=
 +
|period=
 +
|period ref=
 +
|period comment=
 +
|block=
 +
|block ref=
 +
|block comment=
 +
|electron configuration=
 +
|electron configuration ref=
 +
|electron configuration comment=
 +
|electrons per shell=
 +
|electrons per shell ref=
 +
|electrons per shell comment=
 +
<!-- Physical properties -->
 +
|physical properties comment=
 +
|color=
 +
|phase=Solid
 +
|phase ref=
 +
|phase comment=
 +
|melting point K=
 +
|melting point C=
 +
|melting point F=
 +
|melting point ref=
 +
|melting point comment=
 +
|boiling point K=
 +
|boiling point C=
 +
|boiling point F=
 +
|boiling point ref=
 +
|boiling point comment=
 +
|sublimation point K=
 +
|sublimation point C=
 +
|sublimation point F=
 +
|sublimation point ref=
 +
|sublimation point comment=
 +
|density gplstp=
 +
|density gplstp ref=
 +
|density gplstp comment=
 +
|density gpcm3nrt=
 +
|density gpcm3nrt ref=
 +
|density gpcm3nrt comment=
 +
|density gpcm3nrt 2=
 +
|density gpcm3nrt 2 ref=
 +
|density gpcm3nrt 2 comment=
 +
|density gpcm3nrt 3=
 +
|density gpcm3nrt 3 ref=
 +
|density gpcm3nrt 3 comment=
 +
|density gpcm3mp=
 +
|density gpcm3mp ref=
 +
|density gpcm3mp comment=
 +
|density gpcm3bp=
 +
|density gpcm3bp ref=
 +
|density gpcm3bp comment=
 +
|molar volume=
 +
|molar volume unit =
 +
|molar volume ref=
 +
|molar volume comment=
 +
|triple point K=
 +
|triple point kPa=
 +
|triple point ref=
 +
|triple point comment=
 +
|triple point K 2=
 +
|triple point kPa 2=
 +
|triple point 2 ref=
 +
|triple point 2 comment=
 +
|critical point K=
 +
|critical point MPa=
 +
|critical point ref=
 +
|critical point comment=
 +
|heat fusion=
 +
|heat fusion ref=
 +
|heat fusion comment=
 +
|heat fusion 2=
 +
|heat fusion 2 ref=
 +
|heat fusion 2 comment=
 +
|heat vaporization=
 +
|heat vaporization ref=
 +
|heat vaporization comment=
 +
|heat capacity=
 +
|heat capacity ref=
 +
|heat capacity comment=
 +
|heat capacity 2=
 +
|heat capacity 2 ref=
 +
|heat capacity 2 comment=
 +
|vapor pressure 1=
 +
|vapor pressure 10=
 +
|vapor pressure 100=
 +
|vapor pressure 1 k=
 +
|vapor pressure 10 k=
 +
|vapor pressure 100 k=
 +
|vapor pressure ref=
 +
|vapor pressure comment=
 +
|vapor pressure 1 2=
 +
|vapor pressure 10 2=
 +
|vapor pressure 100 2=
 +
|vapor pressure 1 k 2=
 +
|vapor pressure 10 k 2=
 +
|vapor pressure 100 k 2=
 +
|vapor pressure 2 ref=
 +
|vapor pressure 2 comment=
 +
<!-- Atomic properties -->
 +
|atomic properties comment=
 +
|oxidation states=
 +
|oxidation states ref=
 +
|oxidation states comment=
 +
|electronegativity=
 +
|electronegativity ref=
 +
|electronegativity comment=
 +
|ionization energy 1=
 +
|ionization energy 1 ref=
 +
|ionization energy 1 comment=
 +
|ionization energy 2=
 +
|ionization energy 2 ref=
 +
|ionization energy 2 comment=
 +
|ionization energy 3=
 +
|ionization energy 3 ref=
 +
|ionization energy 3 comment=
 +
|number of ionization energies=
 +
|ionization energy ref=
 +
|ionization energy comment=
 +
|atomic radius=
 +
|atomic radius ref=
 +
|atomic radius comment=
 +
|atomic radius calculated=
 +
|atomic radius calculated ref=
 +
|atomic radius calculated comment=
 +
|covalent radius=
 +
|covalent radius ref=
 +
|covalent radius comment=
 +
|Van der Waals radius=
 +
|Van der Waals radius ref=
 +
|Van der Waals radius comment=
 +
<!-- Miscellanea -->
 +
|crystal structure=
 +
|crystal structure prefix=
 +
|crystal structure ref=
 +
|crystal structure comment=
 +
|crystal structure 2=
 +
|crystal structure 2 prefix=
 +
|crystal structure 2 ref=
 +
|crystal structure 2 comment=
 +
|speed of sound=
 +
|speed of sound ref=
 +
|speed of sound comment=
 +
|speed of sound rod at 20=
 +
|speed of sound rod at 20 ref=
 +
|speed of sound rod at 20 comment=
 +
|speed of sound rod at r.t.=
 +
|speed of sound rod at r.t. ref=
 +
|speed of sound rod at r.t. comment=
 +
|thermal expansion=
 +
|thermal expansion ref=
 +
|thermal expansion comment=
 +
|thermal expansion at 25=
 +
|thermal expansion at 25 ref=
 +
|thermal expansion at 25 comment=
 +
|thermal conductivity=
 +
|thermal conductivity ref=
 +
|thermal conductivity comment=
 +
|thermal conductivity 2=
 +
|thermal conductivity 2 ref=
 +
|thermal conductivity 2 comment=
 +
|thermal diffusivity=
 +
|thermal diffusivity ref=
 +
|thermal diffusivity comment=
 +
|electrical resistivity=
 +
|electrical resistivity unit prefix=
 +
|electrical resistivity ref=
 +
|electrical resistivity comment=
 +
|electrical resistivity at 0=
 +
|electrical resistivity at 0 ref=
 +
|electrical resistivity at 0 comment=
 +
|electrical resistivity at 20=
 +
|electrical resistivity at 20 ref=
 +
|electrical resistivity at 20 comment=
 +
|band gap=
 +
|band gap ref=
 +
|band gap comment=
 +
|Curie point K=
 +
|Curie point ref=
 +
|Curie point comment=
 +
|magnetic ordering=
 +
|magnetic ordering ref=
 +
|magnetic ordering comment=
 +
|tensile strength=
 +
|tensile strength ref=
 +
|tensile strength comment=
 +
|Young's modulus=
 +
|Young's modulus ref=
 +
|Young's modulus comment=
 +
|Shear modulus=
 +
|Shear modulus ref=
 +
|Shear modulus comment=
 +
|Bulk modulus=
 +
|Bulk modulus ref=
 +
|Bulk modulus comment=
 +
|Poisson ratio=
 +
|Poisson ratio ref=
 +
|Poisson ratio comment=
 +
|Mohs hardness=
 +
|Mohs hardness ref=
 +
|Mohs hardness comment=
 +
|Mohs hardness 2=
 +
|Mohs hardness 2 ref=
 +
|Mohs hardness 2 comment=
 +
|Vickers hardness=
 +
|Vickers hardness ref=
 +
|Vickers hardness comment=
 +
|Brinell hardness=
 +
|Brinell hardness ref=
 +
|Brinell hardness comment=
 +
|CAS number=
 +
|CAS number ref=
 +
|CAS number comment=
 +
<!-- History -->
 +
|naming=
 +
|predicted by=
 +
|prediction date ref=
 +
|prediction date=
 +
|discovered by=
 +
|discovery date ref=
 +
|discovery date=
 +
|first isolation by=
 +
|first isolation date ref=
 +
|first isolation date=
 +
|discovery and first isolation by=
 +
|named by=
 +
|named date ref=
 +
|named date=
 +
|history comment label=
 +
|history comment=
 +
<!-- Isotopes -->
 +
|isotopes=
 +
|isotopes comment=
 +
|engvar=
 +
}}
 +
'''Copper''' is a transition metal with the symbol '''Cu''' and the atomic number 29. It is a widely available commodity and can be obtained in numerous forms. It is an amphoteric metal that exists in two common oxidation states, +1 and +2, and can also exist in a +3 and a +4 state. Copper itself is chemically resistant, but its oxidation states show tendencies to react. It can be plated out of solution or replaced by a more active metal.
  
 
==Properties==
 
==Properties==
Line 7: Line 278:
  
 
===Chemical properties===
 
===Chemical properties===
−
Copper is notable for its varied chemistry. Copper metal will not dissolve in strong acids, but the addition of an oxidizer such as [[hydrogen peroxide]] permits the dissolution of the metal in most acids. N[[File:Copper_compounds.jpg|thumb|256px|Two copper compounds, tetraamminecopper(II) sulfate and tetrachlorocupric acid.]]itric acid is a sufficiently strong oxidizer to dissolve copper metal. In both cases copper will exist in the +2 (cupric) state, the most common for copper. Compounds of copper(II) are generally bluish.
+
Copper is notable for its varied chemistry. Copper metal will not dissolve in strong acids, but the addition of an oxidizer such as [[hydrogen peroxide]] permits the dissolution of the metal in most acids. [[File:Copper compounds by Brain&Force.jpg|thumb|300px|Two copper compounds, tetraamminecopper(II) sulfate and tetrachlorocupric acid.]]Nitric acid is a sufficiently strong oxidizer to dissolve copper metal. In both cases copper will exist in the +2 (cupric) state, the most common for copper. Compounds of copper(II) are generally bluish.
  
 
When a sufficiently strong reducer, such as iodide or ascorbic acid, is used to oxidize copper, it may enter the +1 (cuprous) state. Copper(I) compounds are generally insoluble in water and highly reducing. Most of them are white, though [[copper(I) chloride]] may vary in color due to various impurities, and [[copper(I) oxide]] is red, or yellow when prepared by certain routes.
 
When a sufficiently strong reducer, such as iodide or ascorbic acid, is used to oxidize copper, it may enter the +1 (cuprous) state. Copper(I) compounds are generally insoluble in water and highly reducing. Most of them are white, though [[copper(I) chloride]] may vary in color due to various impurities, and [[copper(I) oxide]] is red, or yellow when prepared by certain routes.
Line 32: Line 303:
 
Under certain circumstances, a copper foil may be produced instead of powder, usually if [[copper(II) chloride]] is used, in an acidic solution.
 
Under certain circumstances, a copper foil may be produced instead of powder, usually if [[copper(II) chloride]] is used, in an acidic solution.
  
−
Clean, superfine, and air-stable copper powder can be created by adding [[ascorbic acid]](vitamin C) to a solution of copper sulfate followed by boiling for a time. An excess of ascorbic acid yields the copper powder and a yellow solution; the composition of this solution has yet to be determined.<ref>Experiment performed 6/17/14 by No Tears Only Dreams Now</ref>
+
Clean, superfine, and air-stable copper powder can be created by adding [[ascorbic acid]] (vitamin C) to a solution of copper sulfate followed by boiling for a time. An excess of ascorbic acid yields the copper powder and a yellow solution; the composition of this solution has yet to be determined.<ref>Experiment performed 6/17/14 by No Tears Only Dreams Now</ref>
  
 
==Projects==
 
==Projects==
Line 39: Line 310:
 
*Copper [[soap]]
 
*Copper [[soap]]
 
*[[Alloys of copper|Copper alloys]]
 
*[[Alloys of copper|Copper alloys]]
 +
[[File:Piece of copper by Zts16.jpg|thumb|220px|A piece of copper, showing some minor oxidation]]
  
 
==Handling==
 
==Handling==

Revision as of 19:06, 14 April 2017

Copper,  Cu
Electrolytic copper.jpg
Dendritic copper crystals made by electrolysis.
General properties
Name, symbol Copper, Cu
Appearance Reddish metal
Copper in the periodic table

↑
Cu
↓
← Copper →
Standard atomic weight (Ar)
Group, block , -block
Period period 
Electron configuration
Physical properties
Phase Solid
Atomic properties
· references

Copper is a transition metal with the symbol Cu and the atomic number 29. It is a widely available commodity and can be obtained in numerous forms. It is an amphoteric metal that exists in two common oxidation states, +1 and +2, and can also exist in a +3 and a +4 state. Copper itself is chemically resistant, but its oxidation states show tendencies to react. It can be plated out of solution or replaced by a more active metal.

Properties

Physical properties

Copper is a reddish metal that is highly malleable and ductile. It can take a high polish, but often appears dull. Older pieces may be coated with the black copper(II) oxide. It has extremely high conductance of both heat and electricity.

Chemical properties

Copper is notable for its varied chemistry. Copper metal will not dissolve in strong acids, but the addition of an oxidizer such as hydrogen peroxide permits the dissolution of the metal in most acids.
Two copper compounds, tetraamminecopper(II) sulfate and tetrachlorocupric acid.
Nitric acid is a sufficiently strong oxidizer to dissolve copper metal. In both cases copper will exist in the +2 (cupric) state, the most common for copper. Compounds of copper(II) are generally bluish.

When a sufficiently strong reducer, such as iodide or ascorbic acid, is used to oxidize copper, it may enter the +1 (cuprous) state. Copper(I) compounds are generally insoluble in water and highly reducing. Most of them are white, though copper(I) chloride may vary in color due to various impurities, and copper(I) oxide is red, or yellow when prepared by certain routes.

Copper(II) ions turn an ordinary flame blue or green.

Copper also has extensive coordination chemistry in both the +1 and +2 states. While copper(I) compounds are insoluble in water, the proper ligand, such as ammonia, cyanide, thiosulfate, or chloride, the copper(I) ion becomes soluble in water. Copper(II) compounds undergo dramatic color changes with the addition of proper ligands: with chloride, a green complex forms (though a red complex, trichlorocuprate, is known to exist); with ammonia and ethylenediamine, a dark blue complex forms, with bromide, a maroon complex forms, and with ascorbic acid, a yellow complex forms.

Copper(III) compounds can be made in the amateur chemist's lab with sodium persulfate and potassium periodate.

One copper(IV) compound is known to exist, but is inaccessible to the amateur due to the requirement of fluorine gas.

Availability

28 gram 3N copper bar

Copper is a common coinage material, and can be found in United States pennies made before 1983. These are an alloy of 95% copper and 5% tin.

Several types of wiring contain copper metal. These wires may be glazed and will require removal before use.

Many electronics contain copper, such as transistors (the back metal plate that is in contact with the heat sink or covered by the plastic case), diodes (the wire), pins (though most are brass), rectifiers, PCBs, computer chips, on rare occasions some heat sinks are made of copper (or brass) etc. Some transistor heat sinks sometimes have an extra copper plate, for better heat dispersion.

Preparation

Copper metal powder can be made from copper(II) sulfate, available as root killer for septic systems, with the addition of either zinc metal or aluminium metal and a chloride source (such as table salt).

Copper powder can be made by reducing a copper salt, such as copper sulfate with iron. If impure iron, such as steel is used, the carbon from the steel will contaminate the solution and may slightly passivate the metal. However the black powder also contains copper(II) oxide, which too is black. The copper powder will require washing, though a simple decantation will suffice, as copper is denser than both contaminants.

Under certain circumstances, a copper foil may be produced instead of powder, usually if copper(II) chloride is used, in an acidic solution.

Clean, superfine, and air-stable copper powder can be created by adding ascorbic acid (vitamin C) to a solution of copper sulfate followed by boiling for a time. An excess of ascorbic acid yields the copper powder and a yellow solution; the composition of this solution has yet to be determined.[1]

Projects

A piece of copper, showing some minor oxidation

Handling

Safety

Copper metal poses little toxicity and clean copper metals are known to have antiseptic properties, thought not as powerful as silver.

Copper compounds are moderately toxic. They are irritant on contact with the eyes, mucous or inhaled.

Storage

Copper metal will develop a thin layer of oxide on its surface, that is usually not a problem and can be easily removed. However, if the copper metal was cleaned with acid before and hasn't been thoroughly washed, there is a risk of forming a patina. Copper powder is more sensitive and in moist air will rapidly oxidize to CuO. It is best stored in closed containers, either in inert gas (CO2 is enough) or under water or any other solvent. In case of the latter, there is the problem when drying the powder, as it may oxidize if done at a temperature too high in open air.

Hygroscopic copper compounds should be stored in sealed containers, to prevent them from absorbing the water from air.

Disposal

Special disposal procedures are required with copper compounds. All copper waste should be converted to the +2 state with peroxide and converted to the carbonate. This waste should never be dumped down the drain: rather it should be taken to the proper disposal facility or recycled.

Recycling copper back to metallic form is easy: dissolve the copper(II) carbonate in a suitable acid, such as sulfuric acid, and then add in a reducing agent. Iron, zinc or aluminium are a good choice as they're cheap and available in large quantities. If aluminum is used, a chloride source should be added to promote replacement and break the protective Al2O3 layer.

See also

References

  1. ↑ Experiment performed 6/17/14 by No Tears Only Dreams Now

Relevant Sciencemadness threads

Retrieved from "https://www.sciencemadness.org/smwiki/index.php?title=Copper&oldid=6561"