Difference between revisions of "Chromium trioxide"

Revision as of 19:42, 16 October 2022

Chromium trioxide

Impure chromium trioxide
Names
IUPAC name Chromium trioxide
Other names Chromic anhydride Chromic acid anhydride Chromium(VI) oxide
Identifiers
Jmol-3D images	Image
SMILES O=[Cr](=O)=O
Properties
Chemical formula	CrO3
Molar mass	99.99 g/mol
Appearance	Dark red solid
Odor	Odorless
Density	2.7 g/cm3 (at 20 °C)
Melting point	197 °C (387 °F; 470 K)
Boiling point	250 °C (482 °F; 523 K) (decomposes)
Solubility in water	164.8 g/100 mL (0 °C) 169 g/100 mL (25 °C) 172.6 g/100 mL (40 °C) 198.1 g/100 mL (100 °C)
Solubility	Soluble in acetic acid, acetone, diethyl ether, nitric acid, sulfuric acid
Vapor pressure	~0 mmHg
Thermochemistry
Std molar entropy (So298)	73.2 J/mol·K
Std enthalpy of formation (ΔfHo298)	−589.3 kJ/mol
Hazards
Safety data sheet	ScienceLab
Flash point	Non-flammable
Lethal dose or concentration (LD, LC):
LD50 (Median dose)	80 mg/kg (rats, oral)
Related compounds
Related compounds	Chromium(III) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Chromium trioxide is an inorganic compound with the formula CrO₃. It is a dark red/crimson solid, widely used in synthesis and industry. It is the acidic anhydride of chromic acid.

Properties

Chemical

Chromium trioxide reacts violently with ethanol and other organic compounds, causing it to combust.

Physical

Chromium trioxide is a dard red/crimson solid in its anhydrous form, and red-orange in aqueous solution. It is very soluble in water and soluble in some organic solvents, such as acetone or diethyl ether, as well as sulfuric acid.

Availability

Chromium trioxide is sold by various chemical suppliers, though due to its hazards it's not easy to get hold of.

Preparation

Chromium trioxide can be prepared by reacting a Cr(VI) containing compound, such as sodium chromate or dichromate with concentrated sulfuric acid.

H₂SO₄ + Na₂CrO₄ → CrO₃ + Na₂SO₄ + H₂O

H₂SO₄ + Na₂Cr₂O₇ → 2 CrO₃ + Na₂SO₄ + H₂O

The solid compound is filtered using a fritted funnel.

Projects

• Chrome plating
• Instantaneous ignition of alcohols

Handling

Safety

Chromium trioxide is a powerful oxidizer, highly toxic, corrosive, and carcinogenic. Avoid contact with alcohols.

Storage

Chromium trioxide should be kept in plastic or glass containers, with a proper label and a hazard symbol, in a dry place. If you're using glass, a good idea would be to keep the glass container inside a plastic container.

Since the compound ignites alcohols on contact, keep it away from any source of volatile solvents or products containing alcohols.

Disposal

A reducing agent, such as sodium metabisulfite, sodium sulfite or sodium thiosulfate can be used to turn CrO₃ into the less toxic Cr(III) oxide. Glucose may also be used, albeit in a diluted solution. The neutralization must be done outside or in a fumehood, as the process will release Cr(VI) aerosoles, which are harmful and carcinogenic.

References

Relevant Sciencemadness threads

• CrO3