View source for Aqua regia

'''Aqua regia''' (Latin "'''royal water'''") also known as '''aqua regis''' ("'''king's water'''"), or '''nitro-hydrochloric acid''' is a highly corrosive fuming mixture of [[Nitric acid|nitric]] and [[Hydrochloric acid|hydrochloric]] acids, optimally in a volume ratio of 1:3. It is most commonly known as the mixture required to dissolve [[gold]].

==Properties==
Aqua regia is a fuming red-yellow liquid at standard conditions.

It is capable of reacting with [[gold]], [[platinum]] and [[palladium]], forming [[chloroauric acid]], [[chloroplatinic acid]] and [[palladium(II) chloride]] respectively. Because of this ability, aqua regia is used in the gold and platinum refining processes. The other "noble metals", [[ruthenium]], [[rhodium]], [[iridium]], and [[osmium]], are not reactive with aqua regia, though ruthenium will dissolve in the presence of oxygen and rhodium may but must be in a very finely pulverized form. [[Titanium]], [[tantalum]], [[niobium]], [[hafnium]], [[tungsten]], [[silver]] do not react as well.

Aqua regia solutions are sometimes used in laboratories to remove hard to clean organic compounds from glassware, but only when the said compounds are in trace amounts. Aqua regia will react extremely violent with organic compounds in sufficient quantities, sometimes with explosive results.

==Preparation==
Aqua regia can be prepared by starting with a volume of concentrated [[hydrochloric acid]] and adding one third of the same volume of concentrated [[nitric acid]], which should be done in a fume hood.<ref>http://web.princeton.edu/sites/ehs/labsafetymanual/cheminfo/aquaregia.htm</ref>

By adding concentrated hydrochloric acid to a nitrate solution, the reaction yields [[nitrogen dioxide]] which dissolves in water to give nitric acid. This mixture is known as "poor man's aqua regia", as while it can dissolve gold, it's of lower quality than the original formula.

==Projects==
*Dissolving gold
*Cleaning glassware

==Hazards and safety tips==
[[File:Corrosive.png|thumb|Corrosive]]'''Never store aqua regia solutions!''' Over time it will oxidize and decompose to form toxic [[nitrosyl chloride]], [[nitrogen dioxide]] and [[chlorine]] gases. Always mix the solution in a fume hood with the sash between you and the solution. Wearing a lab coat, appropriate gloves, splash goggles and/or a face shield is mandatory.

===Disposal===
Neutralize the solution after use with a basic neutralizing agent, such as [[sodium bicarbonate]] or calcium hydroxide.

==References==
<references/>
[[Category:Oxidizing mixtures]]
[[Category:Acids]]
[[Category:PCB etchants]]
[[Category:Corrosive substances]]