YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
Chem Stock organisation
Technicaly a Trivial question,
but my Lab stock room is organised as: Oxidizers, Reducers, Acid, Bases and Metal salts.
but I keep copper carbonate in the Metal salts section, but Strontium or Barium Nitrates/Chlorates in the Oxiderzers section?
shouldn`t I really have the Copper Carb in the Bases section?
and Sr/Ba salts in the Metal salts section?
Im only asking because this kept me up quite a bit last night thinking about it 
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
I put chlorates/nitrates with the oxidizers, personally.
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
I concurr. The carbonates can go either way. But obviously strong oxidizers need to be segregated.
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
well I keep the Sr and Ba and Ca carbonates and hydroxides in the Bases section as well as the Alu hydroxide.
Cu, Mn, Co, blah blah blah goes in the metals section?
so I can`t even say groups 1 and 2 are free, as I have Alu hydoxide in there too.
and as for Fetish Sauron, that`s not my thing mate, I`ll defer that side of things to You.
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
What counts is safety. So, keep acids and bases separated, keep oxidizers and reductors separated. I use this rule only to assure that no energetic
reactions can occur with adjacent chemicals.
I have a cabinet for liquid acids (H2SO4, HNO3, HCl, HBr, CH3COOH, HCOOH).
A cabinet for strong bases (NaOH, KOH, conc. NH3)
A cabinet for strong oxidizers (e.g. chlorate, bromate, permanganate, iodate, dichromate, persulfate, TCCA, hypochlorite)
A cabinet for strong reductors (e.g. metal powders, sodium dithionite, sodium, sulphur, red phosphorus)
Hydrogen peroxide (30%) I store separately, not in a special cabinet.
All other chemicals are stored in convenient order, sorted by frequency of use. This mixed storage also contains moderately strong oxidizers and
moderately strong reductors. Only the really reactive/energetic materials are stored separately.
[Edited on 17-3-07 by woelen]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
