Axismundi000
Harmless
Posts: 5
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Distilling aquaregia
If I distill aquaregia (HNO3 + 3HCl) with water in the receiving flask of a closed system will I get HCl or nitrous gas going over the head. Also if
I add water to the aqua Regia first will that stop the HCl distilling before the boiling point for HNO3 is reached?
Because of the potential fumes which could linger in the distillation system I thought I would ask before going ahead and finding out experimentally.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
You can't 'distil' AR. Don't try it.
|
|
|
j_sum1
Administrator
Posts: 6334
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Ok blogfast. You have my curiosity piqued. What would happen if one was to try it?
|
|
|
Axismundi000
Harmless
Posts: 5
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
It did seem problematic to distill but it was an obvious thought to try and I was curious.
So if you wanted to separate the two acids how may this be achieved?
|
|
|
nezza
Hazard to Others
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
Aqua regia is not a stable mixture. It decomposes to reactive species such as nitrosyl chloride and free chlorine gas slowly at room temperature and
probably quite rapidly if heated. I would suspect heating aqua regia is a BAD thing to even try.
If you're not part of the solution, you're part of the precipitate.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
