nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
What could Benzene be worth, sold by the liter.
Hi, guys.  I would like to ask you a question. I will give a little bit backround
first. I was talking to a new neighbour today, and we were talking about everything. Art, furniture, and all of a sudden he said he had 5 liters of
Benzene in the house that he wanted to sell. He said that it was worth 2000-2500 £ but that figure seem a bit too high to me.
Isn't it?
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
That figure is not even close!
Sigma sells benzene at $403 USD (about £238) for 6 liters.
Unless it's some super special high purity benzene, (at which point one would wonder why there are 5 liters of it) or some sort of antique, there is
absolutely no way it costs that much.
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
The price of benzene is less than 2 $/kg for bulk purchases.
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Benzene is quite a cheap industrial chemical, but for the chemist, a 25-50$ per L is considered fine, and 100$/L if costly.
I never asked for this.
|
|
|
Dr.Bob
International Hazard
Posts: 2748
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Benzene is a byproduct of the petroleum industry. It would be slightly higher than gasoline per gallon or L, as they actually don't want in in
gasoline due to the environmental and OSHA issues. But is is harder and harder to find lately. Toluene is not hard to find, and works just as well
for many tasks.
We used to put surplus benzene and similar hydrocarbons into the truck gas tank we used at the chemical place that I worked at many years back.
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
Depends on purity. If selling stuff that is research grade (99.99 or whatever) then it's going to be expensive.
|
|
|
FireLion3
Hazard to Others
Posts: 218
Registered: 11-1-2014
Member Is Offline
Mood: No Mood
|
|
There are several chemical supply companies in the USA that sell Benzene. Here is a rough list of prices I have encountered for Reagent ACS grade:
500mL $60
4L $230
4Lx4 $700
20L $800-1100
200L $2600-3200
Don't really need any licenses or anything like that for any quantity of purchase. Laws may be different in the EU
|
|
|
nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
He told me that he had it for a few years, so i want to test the purity and clean it up. Preferabley, in the easiest possible way.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I can buy general lab reagent grade benzene for appr. EUR 25 per liter (and I did so).
|
|
|
nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
So you don't think i should pay more then 125 $ for the 5 liters?
I think he was messing with me.
Anybody know a good way to determinate purity. He said that its been standing there for years, maybe they have kind of expiration date?
Thanx for all your help. /N.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If stored properly (clean glass bottle, good cap, well sealed), benzene has no expiration date. Even after tens of years of storage it still is
perfect.
For 5 liters a price of $125 (appr. EUR 100) is decent, provided it still is pure. Industrial grade benzene is cheaper, but it also is not as pure as
reagent grade benzene.
|
|
|
plastics
Hazard to Others
Posts: 141
Registered: 6-11-2009
Member Is Offline
Mood: No Mood
|
|
Sigma-Aldrich ReagentPlus > 99% =£27.12 for 2.5L inc tax
|
|
|
nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
I told him that the price he first gave me was ludacris, and i think he are willing to discuss a new number.
I just want to know if i were to buy it, that it is of a good grade. And also that it really is benzene.
I am going to ask for a small sample that i can test, but i am not sure how.
I know the bp, so i can know for sure that it is the real deal. But how do i meashure the amount of water and other impurities it holds?
Thanks in advance guys.
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I'd check the melting point.
Put some in a test tube and surround it with ice and water.
Anything that doesn't freeze isn't benzene.
If essentially all of it freezes that would suggest it's fairly clean- "commercially pure" benzene.
Also, this is a simple way of purification.
Cool the stuff until 90% or so has frozen, then pour of the liquid.
Almost all the impurities will be in the liquid so, when the frozen stuff melts, it will be of very high purity.
(You can repeat this with the 10% that you poured off and that way you should recover nearly 99% of the original material in a pretty pure form.
assuming it wasn't too heavily contaminated in the first place.)
The big advantage of freezing as a method of purification is that it avoids having lots of boiling flammable liquid.
According to this
http://www.ncbi.nlm.nih.gov/pubmed/18960430
the solubility of water in benzene is only 0.0363M: about 0.07%
That won't matter for most purposes and it's easy to remove by distillation.
(unexpectedly, perhaps, the water distills off first as an azeotrope).
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
what ?!?!
Benzene, bp 80.1c, water bp 100C and the azeotrope comes over FIRST ?
Would never have expected that !
|
|
|
nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by unionised  | I'd check the melting point.
Put some in a test tube and surround it with ice and water.
Anything that doesn't freeze isn't benzene.
If essentially all of it freezes that would suggest it's fairly clean- "commercially pure" benzene.
Also, this is a simple way of purification.
Cool the stuff until 90% or so has frozen, then pour of the liquid.
Almost all the impurities will be in the liquid so, when the frozen stuff melts, it will be of very high purity.
(You can repeat this with the 10% that you poured off and that way you should recover nearly 99% of the original material in a pretty pure form.
assuming it wasn't too heavily contaminated in the first place.)
The big advantage of freezing as a method of purification is that it avoids having lots of boiling flammable liquid.
According to this
http://www.ncbi.nlm.nih.gov/pubmed/18960430
the solubility of water in benzene is only 0.0363M: about 0.07%
That won't matter for most purposes and it's easy to remove by distillation.
(unexpectedly, perhaps, the water distills off first as an azeotrope).
|
Thanks for taking your time to helping me out. Your post have been really helpful. I really appreciate it.
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by aga | what ?!?!
Benzene, bp 80.1c, water bp 100C and the azeotrope comes over FIRST ?
Would never have expected that ! |
I think it's pretty much guaranteed with two immiscible liquids.
http://en.wikipedia.org/wiki/Heteroazeotrope
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
