| Pages:
1
2 |
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
Running current through wine
http://people.math.aau.dk/~cornean/index.html/ACwine.pdf
"An optimum treatment, with electric field 600 V/cm and treatment time 3 min, was identified to
accelerate wine aging, which made the harsh and pungent raw wine become harmonious and dainty."
I'm not a great chemist, which is why I've come here. What equipment would I need to set an experiment up for this - on a 750mL scale?
Would this require platinum electrodes?
Does electro-chemistry require stirring (sorry, must ask).
What is a good power-supply for the above rating?
What does it mean 600V/cm - cm of electrode?
Apologies, I have never read about electro-chemistry before, but I do like making wine, and this seems very interesting to me.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | What equipment would I need to set an experiment up for this - on a 750mL scale? |
A high tension cable and a bottle to contain the wine, basically . . .
The attached paper describes accelerated maturation by placing wine in an intense electric field ─ it has nothing whatever to do with
electrolysis!
The output (~10kV) from an NST should suffice but I'd imagine quite a bit of tweaking field-strenght would be necessary . . .
If you have the transformer and know the safety measures required, go for it?
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
[sarcasm]No, you should try electrolyzing wine with a 10-15 kV neon sign transformer![/sarcasm]
A 600 V/cm field would correspond to (for example) a difference of 12 kV across 20 cm.
|
|
|
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
WHAT? This is just from the electric field?!
... Ok. I have some background in chemistry and physics, but without donating any electrons how are they lowering aldehyde and higher alcohol
concentrations?
They have two electrode plates, which are on either side of an insulated pipe. They then put out 600V/cm at a distance between electrodes of 20cm,
which is 12kV. In order to do this with a 10kV NST, I would need the wine to pass through the electrodes which would be separated at 16.7 cm.
I'll brain storm some kind of setup for this, but if anyone has any ideas I'm all ears.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I'm not entirely sure how it works (if it works at all) but I think it has to do with the electric field providing energy for reactions. Honestly, I'm
pretty skeptical.
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
http://en.wikipedia.org/wiki/Dielectric_barrier_discharge
...Also known as the "silent electric discharge".
http://books.google.com/books?id=9Jw9AAAAIAAJ&pg=PA261&a...
|
|
|
quantumchromodynamics
Hazard to Self
Posts: 67
Registered: 25-9-2013
Location: with much determination, nowhere in particluar
Member Is Offline
Mood: tired but still trying
|
|
a wine capacitor
Seems like they are using the wine as a capacitor dielectric. The volts/cm will vary depending on the dielectric constant of the wine. That is very
weird. Are you suppose to use a constant DC field, or use an AC field? I wonder what effect frequency would have on your wine. Very curious about
that.
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
Just another result.
The effects of alternating electric fields on wine
http://aut.researchgateway.ac.nz/handle/10292/5702
|
|
|
IrC
International Hazard
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
Wouldn't it be wise to mention to those not skilled in the arts that some metals are harmful if the wine is ingested? Considering the fact many metals
will be dissolved to some degree in the wine especially with an applied voltage. Wine will dissolve at least traces of many metals even without an
applied voltage. Ag, Au, Pt would be fairly safe electrodes. Drinking a strong solution of Cu not so much. Or am I just being overly cautious? I
realize hissingnoise you are not talking about direct electrolysis but beginners might be inclined to think it was OK unless at least some mention is
made of possibly bad outcomes if they go sticking electrodes in the wine cavalierly. I don't think it is stated clearly enough that a field is created
with high tension electrodes placed around (outside) the bottle. The impression of direct electrolysis comes from the thread title "Running current
through wine".
In Rome they often sweetened wine with lead, I do not recall the outcome being all that helpful. Seems it drove some to fiddling while burning down
the neighborhood.
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
|
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by IrC  | Wouldn't it be wise to mention to those not skilled in the arts that some metals are harmful if the wine is ingested? Considering the fact many metals
will be dissolved to some degree in the wine especially with an applied voltage. Wine will dissolve at least traces of many metals even without an
applied voltage. Ag, Au, Pt would be fairly safe electrodes. Drinking a strong solution of Cu not so much. Or am I just being overly cautious? I
realize hissingnoise you are not talking about direct electrolysis but beginners might be inclined to think it was OK unless at least some mention is
made of possibly bad outcomes if they go sticking electrodes in the wine cavalierly. I don't think it is stated clearly enough that a field is created
with high tension electrodes placed around (outside) the bottle. The impression of direct electrolysis comes from the thread title "Running current
through wine".
In Rome they often sweetened wine with lead, I do not recall the outcome being all that helpful. Seems it drove some to fiddling while burning down
the neighborhood.
|
Like they said - the electrodes never come in contact with the wine..
|
|
|
IrC
International Hazard
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
I realize this. I was merely thinking about beginners going by the choice of wording used in the topic heading, trying the experiment by sticking
electrodes directly in the wine. Just thought someone should mention the danger of doing it using a bad choice of electrode material. You just never
know who is reading these pages so clarification is important. Obviously if an NST was used doubtful any wine would be left in the bottle.
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
I too was sceptical, but I'm trying to be neutral. I agree with WGTR, this is most likely the effect from a silent discharge, if
anything. Silent discharge is a standard method for making ozone in air 
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | WHAT? This is just from the electric field?! |
To be honest, I can't see how an EF could affect wine in any way.
The researchers may though, have found a further incidence of the 'placebo effect' . . .
|
|
|
subsecret
Hazard to Others
Posts: 424
Registered: 8-6-2013
Location: NW SC, USA
Member Is Offline
Mood: Human Sadness - Julian Casablancas & the Voidz
|
|
IIRC, ballasts from fluorescent fixtures give an output voltage of about 600 V. If you're willing, you may want to cut the secondary winding out of a
microwave oven transformer, and rewind with the proper number of turns.
Fear is what you get when caution wasn't enough.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
One thing to note: The paper mentions using 3 kHz AC. Frequency could potentially have a big effect.
|
|
|
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
Upon further reading I don't think this holds any water - there could be some type of SOMETHING going on (as method would ionize things - it can make
ozone after all) I won't be trying it.
I do wonder if electrical hydrolysis/esterification could have a beneficial effect on wine though. Stir w/ platinum electrodes at a few mA
|
|
|
IrC
International Hazard
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
| Quote: Originally posted by Nectarine | Upon further reading I don't think this holds any water - there could be some type of SOMETHING going on (as method would ionize things - it can make
ozone after all) I won't be trying it.
I do wonder if electrical hydrolysis/esterification could have a beneficial effect on wine though. Stir w/ platinum electrodes at a few mA
|
Cheddite Cheese "One thing to note: The paper mentions using 3 kHz AC. Frequency could potentially have a big effect."
In the 80's Savin and IBM were in big competition to get the best Gamma in their copies by increasing charge to mass ratio of toner particles. They
were trying for copies which would look like they were printed on an IBM Selectric. Problem was the charge around each particle was very anisotropic
meaning in short order the darkest inks would begin clumping together and settling to the bottom. Many methods were tried involving circulation,
bottom scrapers, and so on. I believe a similar approach is being used here, a 3 KHZ AC field applied at high voltage with electrodes tightly against
the bottle would in effect cause a vibration in the particles in the Wine, reducing sedimentation. As particles clump together (no doubt from similar
anisotropic electric fields in the particles as my toner example) sediments fall out of suspension ruining the flavor of the Wine. If I had to guess
not only is this what they are doing, I believe this would actually work to improve the Wine.
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
|
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
Eh, I disagree IrC - wine flavor improves dramatically when settling - as particulates of tannins and yeast auto-lysis drop out of solution, the
overall quality improves. This can take up to a year for some wines.
Aging, on the other hand, is often attributed to the esterification of higher alcohols, quenching (reduction) of sulfurous compounds and the removal
of aldehydes.
I believe that the general hypothesis was that this would increase esterification and reduction in wine, and thus accelerate the aging process. I
doubt it has to do with precipitation or sedimentation.
But who really knows!
|
|
|
IrC
International Hazard
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
Very interesting and informative thoughts. I still must wonder though, it seems the greatest effect a 3KHZ electrostatic field would have the way it
is being applied is to keep smaller particles from growing into larger ones. How about this then. Assume anisotropic field configurations to the
particles allow them to chemically react or combine in some way (or say 'remove' unwanted components by grabbing them as they grow and settle out). As
they clumped (+ ends to - ends), these fields would be neutralized (as particles grew in size) reducing reactions such as you hypothesize by
elimination of the smaller particles of higher charge to mass ratio. Mind you I am not a chemist and know little about wine. I did however for years
work on making the best liquid toners copy machines used in the latter half of the 20th century and I find some interesting parallels in this subject.
My work was in the electronics as well as the theory behind keeping highly charged toner particles in suspension and I did have to study the chemistry
well enough to come up with ideas. On that subject, knowing what I learned about the destructive effects alternating high tension fields have on
chemical systems, would it not make more sense to use piezo elements at lower voltages? Of course this assumes I am right about the vibration being
the goal as opposed to some kind of electrochemical approach. Just guessing here, even though I never drink and know little about wine I still find
this subject most interesting.
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
|
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
The major 'off' flavors of wine include;
Higher alcohols
Aldehydes
Sulfurous compounds (H2S being the biggest culprit, mercapto's [thiols] being slightly less common)
and
Tannins which produce astringency and bitterness
Your theory could work with tannins, which tend to be larger, semi-charged molecules. These can be removed by easier methods, such as adding gelatin,
casein, or albumin.
Alcohols and aldehydes, which tend to be the off flavors for 'young' wines and age out easily (the purpose of the whole experiment) are slightly less
easy to explain by settling out and ion-pairing precipitation.
But again - I really don't know, and every paper seems to conflict with the last!
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
http://en.wikipedia.org/wiki/Aging_of_wine
immersion de bouteilles de vin dans le bassin d'Arcachon
https://www.youtube.com/watch?v=zvpI0b6EBfA
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
What about using a small amount of pharma grade H2O2 to oxidise those off flavours instead of fussing with electric fields? Has it been done before?
Just don't bottle it before you've given it enough time to decompose 
***
I've read on Wikipedia that micro-oxygenation can age the wine, so a small amount of H2O2 might work.
[Edited on 6-5-2014 by deltaH]
|
|
|
Nectarine
Harmless
Posts: 44
Registered: 19-4-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by deltaH | What about using a small amount of pharma grade H2O2 to oxidise those off flavours instead of fussing with electric fields? Has it been done before?
Just don't bottle it before you've given it enough time to decompose
***
I've read on Wikipedia that micro-oxygenation can age the wine, so a small amount of H2O2 might work.
[Edited on 6-5-2014 by deltaH] |
Oxidation is something you strongly try to avoid in aging process - all bottles need to be very tightly sealed (hence things that are aged in bulk
years are coated with wax).
But, I have to say the chemo-selectivity of H2O2 is probably going to be much different than O2. So I can't say whether or not your idea holds water.
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
I see... then probably not a good idea, except maybe to deal with the sulfur compounds.
Wine aging is a fascinating topic, but I think also heavily tainted by much pseudo-scientific approaches that strongly resemble alchemy, for example,
things like a "Clef du Vin" an claims that "one second immersion = 1 year aging" 
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
This method of aging wine appears to use silent discharge.
In theory this could be used to treat wine in the bottle.
When I brew my next batch of mead I may try this,
since I have all the required equipment. The evaluation
methodology is definitely not influenced by a 'placebo effect'
since it used 12 testers in a double blind test. The physical
changes are also indicative of standard aging. ie. increased
esters and a break down or settling of higher alcohols.
Interestingly the amino acids increased indicating lysing of
yeast hulls remaining in solution. Also indicative of the aging
process. I wonder if this would also work on liquors.
If this works on multiple alcoholic beverages this could
revolutionized the brewing and wine making industries.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
