Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Truvia Recrystallization (with interesting supersaturation)
Today I wanted to recrystallize some Truvia (erythritol-based sweetener) to get the erythritol. I added 280 grams of Truvia, which says it contains 3
grams erythritol per 3.5 gram serving, or 86%, to 150 milliliters of distilled water, which I then heated until all dissolved (at 65 C) to form a
clear, slightly yellow-tinged solution. I probably could have used less water, but I wanted to minimize the amount of impurities that precipitated. I
then took the beaker containing the erythritol solution off the hotplate to cool and took the thermometer out. When I returned to it a few hours
later, no crystals had formed. Intrigued, I put the thermometer back in to make sure that it had cooled to room temperature. When I did this, crystals
of erythritol started to form around the thermometer, and very slowly spread to cover most of the flask (some liquid remained). I think the
thermometer had some crystals of erythritol on it which served as seed crystals. What was remarkable how slowly the crystals spread. They took a good
ten minutes to grow to their full extent. This might be a good companion to the classic sodium acetate "hot ice", if anyone can replicate it.
Update:
The yield was 250 g (89%) of recrystallized erythritol (pure white crystals). The leftover liquid was honey-colored. All in all, I am pleased with
these results. I plan to use some of the purified erythritol to make ETN next weekend.
[Edited on 13-10-2013 by Cheddite Cheese]
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
This is called "sursaturation" or "overfusion" effect.
Not only a remaining cristal seed on the thermometer can induce the rapid cristallization, but also scratches into the glass of the thermometer or of
the beaker, vibrations, dusts or hair...
Such rapid "froozing" / cristallization will be less effective in excluding impurities from cristals than slow speed cristallization...
[Edited on 14-10-2013 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
supersaturation, freezing, crystallization, crystals
Please try an English-language spell checker, <strong>PHILOU Zrealone</strong>
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
@PHILOU Zrealone
I wouldn't call the crystallization "rapid". I stared transfixed at the beaker for a good ten minutes. I am satisfied by the purity -- I measured a
melting point of 112 C, and the product is completely colorless. Nonetheless, I think you are right in that crystallization the usual way would
probably result in an even purer product. Also, smaller crystals might be easier do deal with than a huge mass, which I had to break up. Is there any
easy way to prevent supersaturation (maybe using a scratched beaker)?
|
|
|
Poppy
Hazard to Others
Posts: 294
Registered: 3-11-2011
Member Is Offline
Mood: † chemical zombie
|
|
Rapid crystalization is intendedly preferred over if a further was is to be practiced. So, if you find another solvent to perform the final
crystalization or just wash away the water with the impurities, just tought that this should be good.
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
Not to distract from the original point of the thread, but pure erythritol is a consumer product in the US (Where OP is from). Looking in places that
cater to "natural foods" type yuppies should find you a source. It runs something like $10/lb.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Once you have crystals of the "pure material" from the first rapid crystallization; grind it into a fine dust and add it to the ambient T° near
supersaturated solution of truvia.
Add under mixing the fine dust until no more dissolves.
The small dusts of erythritol will act as seeds for crystallization...the more seeding centers you will have, the more crystals of average smaller
particle size you will have.
Place the recipient in the fridge
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I'm pretty satisfied with my results, so I don't think I'll do any more purification. I bought the Truvia on a whim, to see if I could satisfactorily
purify it. I know that purer erythritol is easy to come by, but for me, Truvia is even easier to get. Once I distill some nitric acid, I will attempt
to nitrate a small amount and see how it goes.
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Here in Belgium we have Stevia crystaline sweetener with erythritol as charge agent...
In Carrefour big departement store, 3,99€/300g ... it contains erythritol > 99%... the rest is stevioside what should be nitratable being a
polyoside 
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Yes, Truvia is about the same thing. It is stevia with erythritol as a "bulking agent" i.e. filler. I hadn't though about nitrating the stevioside
before. If the nitrated product is sufficiently stable, it might not even be necessary to purify the Truvia.
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination! 
|
|
Any strong acid is going to mash up stevioside.
It will cleave those glucose units off and then mash them and the steviol structure up.
The honey coloured liquor reported by Cheddite Cheese probably contains these organic remains.
Extracting steviol glycosides from Truvia is probably a lot harder than extracting erythritol.
Extracting with cold ether and then concentrating the dried extracts in the cold might be the way to go.
The residue can then be crystallised to yield pure erythritol.
|
|
|
jwpa17
Harmless
Posts: 45
Registered: 28-5-2013
Member Is Offline
Mood: No Mood
|
|
acid digest of stevioside
"Any strong acid is going to mash up stevioside."
Exactly right - although it's a bit more robust than you might think. Stevioside has both glucose and sophorose sugars. Some Korean workers
published an isolation of the sophorose from stevioside. At I recall, it took between 2 and 3 hours of boiling in 1 M HCl (may have that
concentration wrong) to maximize the yield of sophorose.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Update: I have successfully synthesized ETN from the recrystallized Truvia. I used 1.6 ml WFNA, 1.6 ml H2SO4, and 1 g erythritol. Since the ETN is not
done drying, I do not have a precise yield yet.
|
|
|
bfesser
|
Thread Moved
27-11-2013 at 10:57 |
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
@Cheddite Cheese
Since the Truvia is composed of 86% by weight, try to nitrate the Truvia, and finally try to recrystallized the crude product of nitration. Use a
little excess of nitric acid/sulfuric acid for the nitration. If this work, it should be more practical than your procedure because you are purifing
first the erythritol and than you are obliged to purify the erythritol tetranitrate (also by recrystallization). It is practical to perform the
recrystallization once (for the final nitrated product).
Dany.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
My yield after recrystallization from ethanol was 1.68 grams. Before recrystallization I had 1.72 grams.
I think that purifying the erythritol before nitration is better than purifying ETN afterwards because then no acid is wasted nitrating things that
aren't erythritol.
|
|
|
XeonTheMGPony
International Hazard
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Cheddite Cheese  | My yield after recrystallization from ethanol was 1.68 grams. Before recrystallization I had 1.72 grams.
I think that purifying the erythritol before nitration is better than purifying ETN afterwards because then no acid is wasted nitrating things that
aren't erythritol.
|
Some may be annoyed at me bouncing such an old thread, but I must say this was indeed my problem with poor yields!
By following this thread, I have gained a considerable improvement as noted here: http://www.sciencemadness.org/talk/viewthread.php?tid=7209&a... at page #03
|
|
|
Intergalactic_Captain
Hazard to Others
Posts: 228
Registered: 4-9-2004
Location: somewhere where i don\'t know where i am
Member Is Offline
Mood: frabjous
|
|
Just out of curiosity, have any of you had an issue with maltodextrin? I'm not going into any more detail for reasons of trade-secret bullshit, but
lets just say that pretty much every truvia knockoff uses it as a bulking/flowing agent. We get our legit "truvia" straight from Cargill, so there's
no BOM - Just a thought.
If you see me running, try to keep up.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
