| Pages:
1
2 |
Cyrus
Hazard to Others
Posts: 397
Registered: 24-4-2004
Location: Ancient Persia
Member Is Offline
Mood: No Mood
|
|
Cynmar Scientific Corporation
Has nobody seen this place before, or am I the one missing something? www.cynmar.com
They have the best prices on most labware that I have seen compared to
Indigo, Flinn, AS&S, home training tools etc... (compared $125 at Cynmar to $270 for same order at Flinn) When I ordered,
the process was easy and the shipment
came fine, nothing broken. They do not have much in the way of ground glass
joints though  Is it trash glassware? It
looks ok to me though.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Yes, yes, I have ordered from them, the glass tubing was dirt cheap and awesome, got a very nice nickel crucible at a rock bottom price and got some
other chems too, very fast, got my package in 2 days and the shipping and handling was very reasonable. It was like christmas come early!
|
|
|
Hermes_Trismegistus
National Hazard
Posts: 602
Registered: 27-11-2003
Location: Greece, Ancient
Member Is Offline
Mood: conformation:ga
|
|
http://www.sciencelabsupplies.com
Just did an order from these guys to see how everything came out and I found their service to be excellent and I recieved everything in good order.
I particularly liked the reasonable shipping costs to Canada, and it was so fast they must have shot it out of a cannon facing north.
Still, In future I will order any more rubber pipet bulbs from indigo (I don't pay duty on canadian goods) and the mohr's pinchcocks are
cheaper from science, art and more.
I do plan to see if I can't get a case price on sciencelabs buchner funnels and order a couple cases of them.
"Science, Art and More's" website is fucky like a 5 dollar whore at a preachers convention, though, I find searching it through google
is easier than trying to fight my way through it. After searching for ten minutes I feel like tying the proprietor down with a length of his
over-priced rubber tubing and going montreal on his ass. (quebecois are Kinky bastards).
Pinchcocks
I ordered a few cases of glassware (beakers and flasks) from indigo and I'll see how that turns out. I ordered them last week and paid extra for
"express" shipping and they still aren't here yet. 
Arguing on the internet is like running in the special olympics; even if you win: you\'re still retarded.
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
| Quote: | from science, art and more
Beaker 50ml
Griffin form standard style beaker. - For Age 6+Yrs
|
WTF??? Who are these guys selling to? Their prices are truly a crime, IMHO. $16 for a 2L bomex beaker!? Bomex, for crying out loud. The same thing is
$5.50 at Cynmar.
The way I judge how cheap a supplier is is by their prices on 250mL Griffin-style (low form) beakers. If you're over $2.40, you're
overpriced. Under that and the place might have decent prices. Under $2 and you have hit the jackpot. That's why I love Cynmar.
Just to share an invaluable resource with all of you, Here is the mother of all links databases for chemists. Many good suppliers and info sites are listed. Enjoy.
Hermes: Who exactly is indigo?
|
|
|
Hermes_Trismegistus
National Hazard
Posts: 602
Registered: 27-11-2003
Location: Greece, Ancient
Member Is Offline
Mood: conformation:ga
|
|
Indigo
I've found that it is important to shop around.
It's important to beat the Wal-Mart psych-out shopping strategy. In business courses they sometimes call it the "Vlasic gallon pickle jar
trick" or variants of the above.
What you do is to take a common item (in walmart in the 90's it was Vlasic pickles, and put them right near the front door.
The price was as low as 2 bucks for a gallon sized jar of vlasic pickles. They have found that peoples brains are lazy.
If you show someone a good price on a n item early in the shopping experience, a person is more likely to think that any further items that they see
the prices of, are good prices.
If a person sees an expensive item early in the shopping trip, they think that ALL further items are overpriced.
The best idea is to actually write down what you need, and then check all prices in all stores.
Eliminating the emotional factor.
What a person is likely to find is that every store has good prices on some things, OK prices on most things, and high prices on some things.
I find myself sometimes ignoring this common sense procedure.
To my later chagrin.
Arguing on the internet is like running in the special olympics; even if you win: you\'re still retarded.
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Tips
Being a very parsimonious person (no matter what anyone tells you, it <i>is</i> hereditary), I always shop around. In fact, I’ve found
quite a good deal of companies in my everlasting quest for cheap labware.
I was originally planning on writing a long post in a new thread with buying tips and companies, but I never found time. Now that I’ve found that
database mentioned in my previous post, I don’t really need a listing of companies, but I’ll write one up if anyone is interested. Due to the fact
that much of the wisdom I’ve gathered has already been displayed or mentioned in this thread, I will just write up the rest here. I apologize in
advance for the formatting and layout of this thing.
There are three or four distinctly different types of companies that sell labware, depending on how distinct you want to be:
-The first is comprised of huge companies that only sell things in huge unit sizes. These companies will probably not sell you anything in small
quantities.
-The second will sell things to individuals in small quantities (like single flasks, etc) with good prices. These are few and far between, although
there are some out there. Cynmar is among the best.
-The third type is comprised of companies which will sell in small quantities at very high unit prices.
-The fourth type is comprised of companies that, like type III sell at high unit prices, but have an entirely different primary focus. For example,
United Nuclear mainly sells pyrotechnic supplies, but they also offer a small range of labware at very high prices.
The line between type III and type IV companies is not clear, so they may be considered one type. This last type is unfortunately the most common.
Finding companies it not quick or easy. The best method I’ve come up with is looking for an extremely standard piece of labware (like a 250mL
griffin (low-form) beaker) with froogle and wading through the piles of type III and IV companies to find the type II gems. The rule of thumb
mentioned in my previous post on these beakers will help greatly. Another approach would be to try the Thomas Register, although this is bound to give you a lot of type I companies.
Typically, any one good company has incredibly good prices on one item or class of items and insane prices on another. One example is United Glass Tech. They have rock-bottom prices on standard vacuum distillation equipment (their prices for vacuum glassware are almost always
much lower than other companies’ prices for non-vacuum glassware), but have ludicrous prices on other things. For example, there is no company
offering cheaper vacuum flasks that I’ve seen, although their prices on beakers are much higher than Cynmar’s (12 heavy-duty 250mL Kimax beakers
are $75 at UGT and $48 at C). Thus you don’t buy beakers from UGT, but you do buy distillation glassware there.
The typical scenario one is faced with on any order is along the lines of the following:
You need items 1, 2, and 3. They are all sold by companies A, B, and C. A, B, and C have the best prices on items 1, 2, and 3, respectively. It may
seem straightforward to make a choice for the items, but extra costs have to be factored in. Shipping costs, for instance, have to be weighed against
the money saved by buying from a particular company. Some companies have minimum orders, while others have maximum orders (thank the drug wars for
this last one). The list of things to consider goes on.
If I remember more, I will post it.
|
|
|
MadHatter
International Hazard
Posts: 1346
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Labware shopping
As stated in previous posts, it really does pay to shop around. I don't like the chemical prices
for most compounds on Cynmar. Then again, there are others that are far worse ! One on
eBay, called ChemSavers, used to be reasonable. The last time I checked, most of their
prices had been jacked up. I still buy my KMnO4 from Sears because their price on the
larger quantities is better than most. And as long as I pay in cash, there's no record of the
transaction. As for glassware, Bomex is fine for applications that don't involve high heat.
Cymar's prices are excellent with that glass grade as well as the prices on their Liebig
condensers provided you don't need frosted connectors.
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
|
Mendeleev
Hazard to Others
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
Fuck the glass, have you seen their chemical selection? It's not the best in terms of variety, but it is cheap as hell . Just some examples:
2.5 kg NH4Cl: $13.30
500 g Acetamide: $24.15
500 mL n-butyl alcohol: $11.77
500 g CaO: $6.15
4 L 37% Formaldehyde: $16.47  (Yeah, I know this one takes the cake, this is
the best deal in chemical history! )
500 g MnO2: $9.15
100g HgCl2: $34.07
4 L Anhydrous MeOH: $22.07
2.5 kg KOH: $24.47
500 g Urea: $5.65
This place has got some of the cheapest chemical prices I have ever seen! The only companies that compare are those that only sell to other companies
like VWR, Sigma, Fisher, and Merk .
Besides United Glass Tech, the other place to get really cheap ground glassware is: http://stores.ebay.com/kantu200-scientific-store
A full ground glass still for $120 is nice, but I already had a still before I discoverd this store. So I am going to buy a 30 cm reflux high
efficiency condenser and a 500 mL pressure equalized addition funnel from them, and then maybe a Soxhlet in a month or so.
The cheapest place to get scales is: http://stores.ebay.com/AVOGADROS-LAB-SUPPLY
A 120 X .01 g scale for $30! Damn I wish I'd known about this place before I dished out $100 for a triple beam balance.
[Edited on 2-11-2004 by Mendeleev]
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
I have considered buying one of Kantu200’s distilling setups, but I decided that buying a vacuum setup from a more well-known supplier would be the
same price. I am talking about UGT, which sells labware under the name ‘labglass’. Buying a 20/40 distilling setup from Kantu200 would have been
$160 ($120 glass + $40 shipping), while buying the same thing with a glass stopper and 0-400*C thermometer from UGT through eBay would have been $165
(free shipping on all items  ). It seems, though, that Kantu200 has lowered
their prices somewhat since bought that setup, so they may be a cheaper alternative at the moment.
[Edited on 2-11-2004 by neutrino]
|
|
|
atombum
Harmless
Posts: 20
Registered: 7-6-2004
Member Is Offline
Mood: No Mood
|
|
Cynmar
I had not checked Cynmar in a while as their selection was (at the time) a bit small, but after reading this thread about rock-bottom prices, I
decided to see what they had. I found out a very simple reason why they have such low prices. There is a notation of *hazardous* next to most
chemicals. They state there is a $13 fee added to any item with that designation, since UPS imposes this on them. However, although these items are
hazardous materials in larger amounts, these containers fall under (often way under) the quantity threshold for hazmat! Every other online supplier
I've dealt with does not put their own hazmat notation next to the items until a much higher quantity, and it's always the same amount- the
ORM-D limited quantity exemption. And besides, the UPS hazmat fee is $20!????
All of the internet and ebay chemical suppliers I've seen charge in the $7 to $11 dollar range for one item, and that's out the door, with
packaging and handling. Not that figure...plus $13! It seems like things are so often 'too good to be true', as they say.
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Are you sure that it isn't just a $13 fee added to any order with 1 or more hazardous items? That's the impression I got from their shipping
policy.
|
|
|
rift valley
Hazard to Others
Posts: 103
Registered: 24-7-2004
Location: NH
Member Is Offline
Mood: semiconducting
|
|
I have made a few orders from Cynmar, and I have only great things to say about it! I once ordered some chemicals but I was too stupid to realize the
15 dollar charge but I was only charged a total of 10 bucks for shipping. I really like this company.
|
|
|
PainKilla
Hazard to Others
Posts: 306
Registered: 29-4-2004
Member Is Offline
Mood: No Mood
|
|
I love Cynmar. They don't really have suspicions or anything, and have awesome prices and shipping. I ordered a XXXXXX of XXXXXXXXX without any
problems at all, and speedy shipping too. They have excellent glass and prices. Cynmar kicks ass  .
EDIT: Chemical sources? Huh?
[Edited on 14-11-2004 by PainKilla]
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Is discussion of chemical sources really necessary?
|
|
|
rift valley
Hazard to Others
Posts: 103
Registered: 24-7-2004
Location: NH
Member Is Offline
Mood: semiconducting
|
|
Wow I might have to ask for this for christmas
http://www.cynmar.com/product_info.php?cPath=122_257&pro...
|
|
|
chloric1
International Hazard
Posts: 1147
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Why Not?
| Quote: | Originally posted by S.C. Wack
Is discussion of chemical sources really necessary? |
I would have not known of Cynmar hadn't someone mentioned them. Surely, I woul d have accidently stumbled on it sooner or later but once the
news spreads, greed will take control and prices will go up. Nice that I didn't have to wait until I ran into all by myself.
Oh yea one more note, I realize their is paranoid feelings about suppliers being shutdown and whatnot but Cynmar has enough educational stuff that I
think they will be fine. Hell, I have a daughter on the way and I see a lot of cool physics stuff I want to buy to teach her with.
[Edited on 11/13/2004 by chloric1]
Fellow molecular manipulator
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
You should use google or froogle more often, then. All of the US sources mentioned at this site can be found with them, and ebay.
Keep in mind that people who mention where they get their chems may also have prior or future posts telling what they use them for. And this is
ammunition against said suppliers.
Also keep in mind supply and demand. It may just be coincidence that when a source is mentioned in a forum, prices go up, every time.
|
|
|
Mendeleev
Hazard to Others
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
I've never encountered prices going up after posting sources on the forum. Furthermore you will always be able to find things dirt cheap on
ebay. BromicAcid, I have a question about your nickel crucible, will it withstand KNO3 at 500 C?
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
I used mine once for a high temperature oxidation with NaNO3/NaOH somewhere past molten but I don't know how hot it got, in the end there were
little black spots on the bottom inside of the crucible, shiny and even with the metal, I assume it was very minor oxidation, but there was nothing
eaten into the metal, just like the surface took on the color. So I guess nickel should stand up to KNO3 at 500 C.
|
|
|
MadHatter
International Hazard
Posts: 1346
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Cynmar
Cynmar looks good on some of their chemical prices but not all. Still the glassware is a
bargain depending on what you're looking for. I've found cheaper prices locally on some
compounds(like the pottery shop in another post). It really does pay to shop around !
[Edited on 24-11-2004 by MadHatter]
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
|
oxydiser
Harmless
Posts: 10
Registered: 2-12-2004
Location: I come from a land downunder
Member Is Offline
Mood: furry
|
|
web ordered glassware
I was just thinking about expanding my glassware collection that I *accumulated* piecewise over the course of my BSc...still need more filtering
apparatus and sep funnels. Does ordering lab equipment via the net/phoning supplier raise any eyebrows with the feds? Any ozzies had any luck with
this?
|
|
|
rift valley
Hazard to Others
Posts: 103
Registered: 24-7-2004
Location: NH
Member Is Offline
Mood: semiconducting
|
|
D'oh starting Janurary 1st Cynmar stopped selling chemicals to individuals.
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Congratulations.
EDIT/RANT: I doubt Cynmar took this action because they were making too much profit. And the assumption that other sources will always be there is
naive. You don't need a weatherman... Everyone should be spending as much as they can, while they can.
Uncle Fester said that his goal is to make every chemical illegal, with the end result being that none of them is (de facto) illegal. A nice idea that
will probably not work in practice. The sway of LE, the reactionary-ness of legislators, sheepishness of the people, lapdog-ness of the media, and the
possible dimensions of bureaucracy seem to be unlimited until the eventual fiscal collapse.
Another obvious reason not to tell morons where to order chems is that when these people blow themselves up/get arrested, the source of the
chemicals is of course investigated. Cynmar put a label with their name and address on it on everything.
The turn that this forum has taken since the loss of the Hive makes source discussion even more unwise, IMHO. Maybe the word cocaine comes up
regularly here, I don't know. Hopefully no ones concerned parents or LEOs are peeking in.
[Edited on 18-1-2005 by S.C. Wack]
|
|
|
budullewraagh
Hazard to Others
Posts: 168
Registered: 1-8-2004
Location: new york
Member Is Offline
Mood: Aliphatic
|
|
damn that really blows. they had some great chems there. oh well, i guess i'll have to hope unitednuclear will expand
|
|
|
chloric1
International Hazard
Posts: 1147
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Unexpected blow
Oh man I just put an order in for a nickel crucible and ringstand with one bottle of strontium chloride December 29!! It wasn't 4 days after I received the order, I discovered the news. I still
have a few suppliers to rely on but the obscure stuff is getting harder to get. A particular auction is still good source but it varies greatly from
week to week. I think when I get tax check I need to buy at least a few
essentials in 5 pound or more sizes. When those run out I will forget the hobby and do glass or pottery.
[Edited on 1/19/2005 by chloric1]
Fellow molecular manipulator
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
