helzblack
Harmless
Posts: 35
Registered: 6-8-2019
Member Is Offline
|
|
Phenol from toluene
I know I can get this from salicylic acid, but I am trying to make bakelite, in my ever quest to make really cheap moulds (cheaper than buying epoxy
resin by the bulk).
Assume a price of 25$ per kg for epoxy resin.
Currently I can get formaldehyde for 2.5$ a kilo. Toluene at 7$ per liter.
I can also get Sodium benzoate at 2.5% per kilogram.
If I could turn the toluene to phenol it would be very cheap.
The moulds are not going to be used for anything that is supposed to be edible or anything like that.
How can I cheaply transform the toluene into phenol?
[Edited on 1-11-2024 by helzblack]
|
|
|
Keras
National Hazard
Posts: 896
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
There is no cheap way to do this.
Oxidise toluene to benzoic acid using potassium permanganate then reduce it to alcohol using sodium borohydride. Neither of those are cheap, nor easy
to source, for the latter.
If you don’t have access to sodium borohydride, it’s even worse. You'd have to decarboxylate benzoic acid to benzene, using sodium hydroxide on
sodium benzoate, then nitrate your benzene, reduce nitrobenzene to aniline, then use sodium nitrite to get a diazonium salt that would be hydrolysed
at 60 °C to give phenol. Definitely doable, but quite an endeavour!
[Edited on 2-11-2024 by Keras]
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
How different is cresol formaldehyde resin from Bakelite?
Not taking the methyl group off might make things easier.
Sulphonation followed by hydrolysis is probably the least bad option on a "home chemistry" scale and it still sucks.
|
|
|
Texium
Administrator
Posts: 4580
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by Keras  | | Oxidise toluene to benzoic acid using potassium permanganate then reduce it to alcohol using sodium borohydride. Neither of those are cheap, nor easy
to source, for the latter. |
If sodium borohydride could reduce carboxylic acids, that would give you benzyl
alcohol and get you no closer to phenol. But it wouldn’t even reduce it anyway.
|
|
|
Keras
National Hazard
Posts: 896
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
| Quote: Originally posted by Texium | | Quote: Originally posted by Keras | | Oxidise toluene to benzoic acid using potassium permanganate then reduce it to alcohol using sodium borohydride. Neither of those are cheap, nor easy
to source, for the latter. |
If sodium borohydride could reduce carboxylic acids, that would give you benzyl
alcohol and get you no closer to phenol. But it wouldn’t even reduce it anyway. |
Drat, you’re right. :/
I don’t agree. Sodium borohydride can reduce carboxylic acids when used with zinc chloride. See below.
|
|
|
helzblack
Harmless
Posts: 35
Registered: 6-8-2019
Member Is Offline
|
|
| Quote: Originally posted by unionised | How different is cresol formaldehyde resin from Bakelite?
Not taking the methyl group off might make things easier.
Sulphonation followed by hydrolysis is probably the least bad option on a "home chemistry" scale and it still sucks.
|
Anything that produces a plastic resin that is neither just a goopy slimy mess, nor a fragile brick, is fine by me as long as it is cheap.
|
|
|
Texium
Administrator
Posts: 4580
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
| Quote: Originally posted by Keras | Drat, you’re right. :/
I don’t agree. Sodium borohydride can reduce carboxylic acids when used with zinc chloride. See below. |
Yes, there are many of these compound reagents of sodium borohydride with various metal salts that are capable of reducing esters or
carboxylic acids. But your first post stated sodium borohydride alone, which would not touch a carboxylic acid.
|
|
|
bnull
Hazard to Others
Posts: 433
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Dazed and confused.
|
|
It depends on your "cheapness" standards. If it involves an initial investment on suitable* equipment that you intend to use for a long
time or until it has paid itself, I'd say it is feasible with a lot of caveats. And an extensive research, of course. Patents, papers, old books.
You want to convert an inflammable, toxic (less toxic than benzene but still toxic) substance into another inflammable, toxic substance. Safety first,
try small scale, don't use open flames, use PPE, do an extensive research etc.
The process is toluene->benzoic acid->phenol. It involves the least amount of steps and, consequently, intermediates**.
Oxidation of toluene to benzoic acid. There are several ways to oxidise toluene to benzoic acid. @Keras suggested
permanganate as oxidiser. If I were to do the procedure, I'd go with electrochemical oxidation or air oxidation. Electricity and air are cheap (it
depends on the country, of course). With appropriate equipment, you can even have a batch converter where you feed toluene and remove benzoic
acid/benzoates.
Decarboxylation of benzoic acid or benzoate. This one may be quite tricky. Reduction of benzoic acid yields benzyl alcohol,
which is a step back, not a step forward in the synthesis. Oxidative decarboxylation of benzoic acid or inorganic benzoates yields phenol. If I'm not
mistaken (someone correct me if needed), when using sodium benzoate, you need temperatures around 400 °C; with copper (ii) benzoate as catalyst and
benzoic acid as substrate, the required temperature is about 150 °C lower (250-280 °C). I find the latter interesting because I love copper salts.
It may end up reasonably cheap (I don't think so) or prohibitively expensive. At least you gain some knowledge in the process. What is cheap for
industry isn't necessarily so for individuals.
*: I mean well welded stuff that has been welded by a professional welder, for example; no DIY crap
made by inexperienced personnel.
**: I vaguely remember one process involving benzonitrile, which was made by the action of TCCA and ammonia over benzoic acid.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
Keras
National Hazard
Posts: 896
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
| Quote: Originally posted by Texium | | Quote: Originally posted by Keras | Drat, you’re right. :/
I don’t agree. Sodium borohydride can reduce carboxylic acids when used with zinc chloride. See below. |
Yes, there are many of these compound reagents of sodium borohydride with various metal salts that are capable of reducing esters or
carboxylic acids. But your first post stated sodium borohydride alone, which would not touch a carboxylic acid. |
Fair enough. You'd need lithium aluminium hydride probably. Yet, I find it nice that properly 'enhanced' by the addition of mundane compounds, sodium
borohydride can achieve almost the same results as lithium aluminium hydride, which is way more difficult to source and dangerous to handle.
|
|
|
Keras
National Hazard
Posts: 896
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Another possible route starts from benzoic acid → benzamide → aniline (Hoffman rearrangement) → phenol.
The advantage of this path is that it doesn’t require heat.
[EDIT]That’s not strictly true. Benzamide is purportedly made by dehydration of ammonium benzoate, obtained by mixing benzoic acid and ammonia (or
urea?). Strangely, that’s something I attempted twice with very little success. The benzamide I have was made by reacting ammonia with benzoyl
chloride.
[Edited on 3-11-2024 by Keras]
|
|
|
Hexabromobenzene
Hazard to Others
Posts: 122
Registered: 27-4-2021
Member Is Offline
|
|
Cheapest method of synthesis phenol from polycarbonate(compact discs and others).
First, hydrolysis of your plastic in boiling ethylene glycol with the addition of soda and then heat up to 300C bisphenol and as aspirin. You are half
a mixture of phenol and 4 isopopenylphenol that are easily divided by distillation
Ethylene glycol can be easy recycled again
You can also directly heat polycarbonate with zinc chloride
|
|
|
helzblack
Harmless
Posts: 35
Registered: 6-8-2019
Member Is Offline
|
|
| Quote: Originally posted by Hexabromobenzene | Cheapest method of synthesis phenol from polycarbonate(compact discs and others).
First, hydrolysis of your plastic in boiling ethylene glycol with the addition of soda and then heat up to 300C bisphenol and as aspirin. You are half
a mixture of phenol and 4 isopopenylphenol that are easily divided by distillation
Ethylene glycol can be easy recycled again
You can also directly heat polycarbonate with zinc chloride |
Thanks! This is very useful!
I found this paper covering the first reaction. https://pubs.acs.org/doi/pdf/10.1021/ie8010947
But do you know the reaction conditions for the second one? Only heat to 300C that's it?
Edit: Nevermind https://pubs.rsc.org/en/content/articlelanding/2004/gc/b3135...
[Edited on 6-11-2024 by helzblack]
[Edited on 6-11-2024 by helzblack]
|
|
|
RU_KLO
Hazard to Others
Posts: 209
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
Found this,
BE CAREFULL .- Explotion risk
https://www.sciencedirect.com/science/article/abs/pii/S09504...
Explosibility, flammability and the thermal decomposition of Bisphenol A, the main component of epoxy resin
Maciej Celiński, Monika Sankowska
PII: S0950-4230(16)30240-6
DOI: 10.1016/j.jlp.2016.08.024
Reference: JLPP 3312
To appear in: Journal of Loss Prevention in the Process Industries
One of the main products, other than water and carbon oxides was phenol (retention time 16,83 min).The highest quantity was generated at a temperature
of 300oC. Releasing large amounts of phenol during thermal degradation at low temperature can cause a rapid combustion of its fumes due to the
relatively low flashpoint (79oC) and an auto-ignition temperature of (595oC) This also explains the disappearance of phenol at the higher temperature
of the furnace.
Raising the furnace temperature results in increased generation of 4-isopropylphenol up to 750oC. The thermal degradation of Bisphenol A was also
accompanied by small amounts of dodecane, 4-(1-methylethyl)phenol at 500oC, 1,4-benzoquinone and hydroquinone at 750oC
Go SAFE, because stupidity and bad Luck exist.
|
|
|
yobbo II
National Hazard
Posts: 762
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Could urea formaldehyde resin be made and used instead?
|
|
|
helzblack
Harmless
Posts: 35
Registered: 6-8-2019
Member Is Offline
|
|
But is so brittle, I would like to make it tougher
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
