Kovoc
Harmless
Posts: 16
Registered: 2-8-2019
Location: Nova Scotia, Canada
Member Is Offline
|
|
Information on Wood/Lignin Pyrolysis?
I have recently been doing research into the pyrolysis of lignin as a source of aromatic compounds (specifically benzene). I am curious if anyone has
experience doing this on a small scale. I have a read a few papers on the matter, but they tend to be either very recent, with a focus on using
strange catalysts for a "green" production of aromatics; or they are from over a century ago and are more concerned with the commercially valuable
lighter compounds (i.e., methanol, acetic acid, etc.) than they are the aromatics.
The products of the pyrolysis should be things like isoeugenol, vanillin, etc. Therefore, I would assume just oxidizing them and then distilling them
again with a strong alkali would work to turn them into phenols. However, if there is a more efficient way of doing this I would be very interested
to know.
|
|
|
bnull
Hazard to Others
Posts: 435
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Dazed and confused.
|
|
Quote: Originally posted by Kovoc  | | I have a read a few papers on the matter, but (...) they are from over a century ago and are more concerned with the commercially valuable lighter
compounds (i.e., methanol, acetic acid, etc.) than they are the aromatics. |
Because petroleum cracking hadn't been discovered or widespread back then. The only sources of lighter compounds were fermentation and wood pyrolysis.
Aromatics came from coal tar.
A better source of benzene is PET. There are several threads about the process here in the forum. It is in a sense more well-researched than wood
pyrolysis.
If you still prefer to pyrolyse wood, notice that the products obtained depend on what wood you are using, the temperature to which the wood is
submitted, the pressure. It is not trivial. Check this paper: H. Kawamoto, "Lignin pyrolysis reactions".
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
Mateo_swe
National Hazard
Posts: 541
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
If you want to make benzene i would use sodium benzoate (spice section in foodstore) and NaOH.
Mix in a paintcan and make a hole for the distillation adapter and condenser (simple distillation) and then heat the paintcan with a camping gas
burner.
I have done this many times. You will get a yellow/orange distillate that when distilled again get you relative pure colorless benzene.
There is a lot of YT videos of this procedure, one from nilered that is explaining the procedure good.
The pyrolysis of wood would be a similar procedure but you would get a mixture of products that you would need to separate and this isn't always so
easy.
[Edited on 2024-7-8 by Mateo_swe]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
