larh
Harmless
Posts: 4
Registered: 23-8-2023
Member Is Offline
Mood: No Mood
|
|
Quest for an accessible uv photoinitiator for diy 3d printing resin
Hello everyone! I'm slowly progressing on my quest to build my own home lab while gaining the necessary skills for the min dream project.
I'm using a 3d printer (mslaanycubic m5s) currently to prototype the device parts I need. Looking back into the last month I've spent so much on
printing resin that it started making sense for me to consider blending my own resin. I doesn't have to be as good as commercially available, just
would be enough if it holds the structure of the prototypes with decent precision.
Is there any easily accessible photoinitiator I could mix with acrylic or polyester resin and feed it to the printer?
Due to local customs restrictions (Indonesia) hardly I'll be able to import anything labeled as chemical supply from abroad, so it has to be something
I can get here or make myself.
|
|
|
bnull
Hazard to Others
Posts: 434
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Dazed and confused.
|
|
What about camphorquinone? It is made by oxidation of camphor and used in dental resins. Camphor is very accessible in Indonesia, I suppose.
|
|
|
EF2000
Hazard to Others
Posts: 153
Registered: 10-5-2023
Location: The Steppes
Member Is Offline
Mood: Taste testing the Tonka fuel
|
|
In South and South East Asia camphor tablets are available as mothballs.
Wroom wroom
"The practice of pouring yourself alcohol from a rocket fuel tank is to be strongly condemned encouraged"
-R-1 User's Guide
|
|
|
larh
Harmless
Posts: 4
Registered: 23-8-2023
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by bnull  | | What about camphorquinone? It is made by oxidation of camphor and used in dental resins. Camphor is very accessible in Indonesia, I suppose.
|
Already considered that option since I can buy it pure in the local lab, but the issue is that it absorbs in 468nm which is past what my printer
outputs(and also essentially makes the resin to be curable by visible light which complicates everything). I'd need to tinker with the printer or
build a new one from scratch using a different light source to match the requirements
|
|
|
bnull
Hazard to Others
Posts: 434
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Dazed and confused.
|
|
Flavone may work. See C. Vasquez-Martel et al. Natural and Naturally Derived Photoinitiating Systems for Light-Based 3D Printing.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
