Chemist1357
Harmless
Posts: 29
Registered: 26-10-2022
Member Is Offline
|
|
Formic Acid Dehydration
Formic acid forms an azeotrope with water at 77.5%. I have this homemade but I need 85%-88%.
I can’t find any clear and easy way to dehydrate it further than 77.5% and I can’t buy 85% in Australia it just isn’t available anywhere and I
prefer to keep things otc.
Can you do it under vacuum or something? There’s always dumping a huge amount of anhydrous Copper(II) sulfate..
|
|
|
Fery
International Hazard
Posts: 1026
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
Industrially they use distillation of azeotrope at reduced pressure, IIRC something like 0,3 atm. But I suppose you need also a good column (like
insulated Hempel with Raschig rings) and variable adjustable reflux ratio distillation head for that.
https://www.researchgate.net/publication/343946284_Process_a...
I found also this for lab. preparation:
https://www.researchgate.net/post/How_do_I_remove_water_from...
You already have anhydrous CuSO4, other choice is B2O3
|
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Possibly go with the classics: mgso4 or CaCl2
|
|
|
clearly_not_atara
International Hazard
Posts: 2799
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
According to a paper found by Klute, formic acid can be dehydrated over anhydrous oxalic acid:
http://www.sciencemadness.org/talk/viewthread.php?tid=7012
Oxalic acid however is purchased as the dihydrate which in turn means you need to dehydrate it first. One method involves heating at 60 C in a retort
with a desiccant at the other end of the tube. Another is the use of alkanes with a Dean-Stark (toluene apparently does not work):
http://www.sciencemadness.org/talk/viewthread.php?tid=11153
|
|
|
Fery
International Hazard
Posts: 1026
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
If using anhydrous oxalic acid for concentrating formic acid works then you can maybe dehydrate oxalic acid dihydrate into anhydrous using silicagel
and desiccator. I once did that with a hope to dry my wet dihydrate crystals but after some time the crystals decayed into dust. The silicagel was
from a pack of effervescent vitamine tablets, nothing special.
|
|
|
Texium
Administrator
Posts: 4618
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
In the past, I’ve dehydrated oxalic acid by azeotropic distillation with toluene and a Dean-Stark trap, followed by putting the resulting anhydrous
oxalic acid in a desiccator over anhydrous CaCl2 and paraffin wax shavings to keep it dry while absorbing any residual toluene.
|
|
|
clearly_not_atara
International Hazard
Posts: 2799
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Quote: Originally posted by Texium  | | In the past, I’ve dehydrated oxalic acid by azeotropic distillation with toluene and a Dean-Stark trap, followed by putting the resulting anhydrous
oxalic acid in a desiccator over anhydrous CaCl2 and paraffin wax shavings to keep it dry while absorbing any residual toluene.
|
Apparently toluene does work! :p
|
|
|
Boffis
International Hazard
Posts: 1879
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Hi Chemist1357; I had this problem once and did some research into upgrading my formic acid and I found these two references I tried the azeotropic
distillation but was a pain though it does work.
Attachment: Anhydrous formic acid AmCJ Garner et al 1911.pdf (452kB)
This file has been downloaded 214 times
Attachment: phptP4SsQ (660kB)
This file has been downloaded 192 times
|
|
|
Chemist1357
Harmless
Posts: 29
Registered: 26-10-2022
Member Is Offline
|
|
| Quote: Originally posted by Boffis | Hi Chemist1357; I had this problem once and did some research into upgrading my formic acid and I found these two references I tried the azeotropic
distillation but was a pain though it does work.
How did you go about doing it? How much mmhg do you have to pull and what was the obtained concentration?
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
