Oncorhynchus
Harmless
Posts: 11
Registered: 14-9-2022
Member Is Offline
|
|
Need Help Fixing Separated Thermometer
I have an alcohol thermometer (max temp 250 C) that has a few mm of separated liquid near the top. I've already tried rejoining it with an EtOH/dry
ice bath with no luck. Think the heating method would do the trick? If so, open flame or sand bath on a hot plate?
|
|
|
Endo
Hazard to Others
Posts: 124
Registered: 5-1-2006
Location: USA
Member Is Offline
Mood: Cold
|
|
If you have access to a centrifuge with deep wells you may consider padding the bottom of the well with cotton and making a tube with water to
counterweight it (use a scale).
It should only take a few seconds after spin-up.
|
|
|
Sulaiman
International Hazard
Posts: 3692
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Heating worked for me but you have to be careful : if the bubble fills, the internal pressure will pop the bulb 
The internal pressure will in any case be high for alcohol at 260C
I held the thermometer with the bulb a few inches above a candle flame.
(360C mercury thermometer)
A high bp liquid bath would have been more controllable but I had no suitable liquid,
in your case conc. sulphuric acid is one option.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Gammatron
Hazard to Others
Posts: 125
Registered: 30-8-2022
Location: Abandoned Uranium Mines
Member Is Offline
|
|
Coincidentally I just noticed my alcohol thermometer had the same problem last night and was wondering if there's a way to fix it.
|
|
|
Oncorhynchus
Harmless
Posts: 11
Registered: 14-9-2022
Member Is Offline
|
|
Follow up...
Is anyone looking to get rid of a 10/30 alcohol thermometer?
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Sulaiman  | Heating worked for me but you have to be careful : if the bubble fills, the internal pressure will pop the bulb
The internal pressure will in any case be high for alcohol at 260C
I held the thermometer with the bulb a few inches above a candle flame.
(360C mercury thermometer)
A high bp liquid bath would have been more controllable but I had no suitable liquid,
in your case conc. sulphuric acid is one option. |
While 260 C is pushing it, cooking oil may be safer than sulphuric acid...
|
|
|
Sulaiman
International Hazard
Posts: 3692
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Whatever the maximum of the temperature scale is,
a higher temperature will be required to get the liquid up to the bubble,
consider it as a linear extension of the scale
Plus
Some of the liquid is already in the bubble so an even higher temperature will be required,
so I doubt that cooking oil will be suitable,
temperatures above smoke point and flash point will be required.
There will be an inert gas in the thermometer, usually nitrogen,
to increase the internal pressure hence prevent the alcohol from boiling,
which is why it will be necessary to force the alcohol all the way up to the bubble.
Good luck
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Dr.Bob
International Hazard
Posts: 2732
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
If anyone is good at this, I have a few therms with this feature. I have not listed them, but would be happy to sell cheap to anyone who wants to
try to fix them. Most are lower range alcohol therms with red liquid.
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Just duck taped mine to a box fan, gonna let it spin for the night
Edit: its almost there, running it more.
Edit. Seems to work, all the red is in the same place now.
Need to check its accuracy
[Edited on 16-1-2023 by Rainwater]
[Edited on 16-1-2023 by Rainwater]
"You can't do that" - challenge accepted
|
|
|
Dr.Bob
International Hazard
Posts: 2732
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Did you tape it to the outside to shake it or to the blade to spin it around? I am willing to try a lot to fix the 4 or 5 ones I have that are
separated now. Tried cooling, no luck, and tried heating one or two, but most have a very small bubble at the top. The ones that were lower or had
a large bubble at the top were easy to heat and fix, but some are not that easy.
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I taped to the blade, red part away from center.
It started dancing so i weighed the thermometer and cut some wire to match.
tapped the weights (copper wire) to the center of each blade to stop the dancing.
"You can't do that" - challenge accepted
|
|
|
Sir_Gawain
Hazard to Others
Posts: 420
Registered: 12-10-2022
Location: Due South of Due West
Member Is Offline
Mood: Like a pendulum
|
|
The same thing happened to me; I found an effective method is to drop it repeatedly from waist height (onto carpet).
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Soo after testing, my thermometer is kept precision but
not its accuracy.
Ice now melts at 1c and boils at 101c.
Better than nothing
"You can't do that" - challenge accepted
|
|
|
Texium
|
Thread Moved
14-9-2023 at 08:25 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
