alchemizt
Harmless
Posts: 36
Registered: 28-1-2019
Member Is Offline
|
|
DIY magnetic stirrer from fan and neodymium magnets
I'm going to build this magnetic stirrer:
https://youtu.be/ZVYK2lhZq9U
What I'm not sure about is whether a 12V computer fan will be powerful enough. Would it be powerful enough to stir up to 10L of liquid? I could
probably use the same curcuit with a house fan that qould be a lot more powerful.
|
|
|
crow6283
Hazard to Self
Posts: 60
Registered: 14-1-2018
Member Is Offline
Mood: No Mood
|
|
Hell to the no it won’t be powerful enough. Even a lot of very nice very expensive magnetic stirrers can’t stir 10 liters.
|
|
|
j_sum1
Administrator
Posts: 6334
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
I have a couple of these. They are quite useful if I ever need to dissolve several things at once in the 250mL range. It is quite a nice idea and
costs nearly nothing. Worth it IMO. But not for 10L. For that I would be buying a paint stirrer and a dedicated drill.
|
|
|
alchemizt
Harmless
Posts: 36
Registered: 28-1-2019
Member Is Offline
|
|
Ah so the capacity of a 12V fan motor is about 250ml? It wouldnt stir say 1L? For 1L would I need to step it up to a 48V DC fan?
|
|
|
alchemizt
Harmless
Posts: 36
Registered: 28-1-2019
Member Is Offline
|
|
I came across this video:
https://youtu.be/rGhSZwOf6sE
Where he makes a 5 gallon magnetic stirrer using a DC fan
|
|
|
crow6283
Hazard to Self
Posts: 60
Registered: 14-1-2018
Member Is Offline
Mood: No Mood
|
|
What you are trying to stir is going to be a factor to, and how you operate it. If you are say, stirring water and start the stirrer with a small
amount in the flask and add more you can stir quite a bit more than you can with all that water in the flask and no stirring. Size and shape of stir
bar relative to the size and shape of flask and what you are stirring also plays a big factor . Actually running a reaction with sketchy stirring
conditions can be a real risk though, what are you gonna do if the thing stops stirring mid run and you can’t get it started again? Something to
think about. Always best to have an excess of stirring power and not have to use it all then to push the envelope.
|
|
|
Sulaiman
International Hazard
Posts: 3722
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
@ j_sum1 : do the fan blades have a function or would it be better to cut them off?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
