khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
possible H2+Cl2 -> HCl plant and chlorination reactor
Alright, first of all let me clarify somethings:
1 - THIS IS DANGEROUS, KNOW WHAT YOU’RE DOING;
2 - THIS POST IS IN NO WAY A TUTORIAL OR MANUAL(it should be seen more like a "I did it so you don't need to" or "if you are as stupid as me, to go
through with this, here is what to look for and try or what to avoid");
3 - IF YOU GET INJURED OR SICK OR DIE OR CANCER OR WHATEVER FOR THIS, IT'S ON YOU(My days are likely numbered, so I don't care much for it);
4 - YOU'LL BE WORKING WITH HYDROGEN(EXPLOSIVE AND FLAMMABLE)
CHLORINE(TOXIC, CORROSIVE, CHEMICAL WEAPON) AND PURE HYDROGEN CHLORIDE(DANGEROUS ACID OR WHATEVER). ALL OF WHICH ARE GASES, WORK OUTSIDE FOR
CHRISSAKE!
Sorry for the angry disclaimer... now what will be discussed here is:
1 - Chlorination of hydrogen, yes, another thread on hydrogen chloride;
2 - chlorination organic compounds;
3 - Reactors and photo-catalytic tubes;
As for my motivation... There were a few posts here with information regarding this and from taking a look at them, I'm painfully aware that buying
hydrochloric acid or making it from sulfuric acid may be cheaper and safer than making it and while that is true for most in North America, I can say
that it is not as easy or cheap on the rest of the world, plus... isn't exploring the science one of our major goals here? so please, bear with me
here.
As I was stating before, I took a look on a few posts here about the subject and most of them were enough to give some pointers, but... I didn't felt
them to be... complete or whole on the subject of working with the free radical mechanism of chlorine "in the garage" with subpar glassware and a
maddening passion for experimentation(or a deathwish, you be the judge). so, here I plan to put all I found out as well what I did that worked and
some of my proposals which is work in the progress.
1 - For the start of the juicy part, I ask... So... you want to make hydrochloric acid?
Since at least 8 years ago, I’ve knew that UV radiation could make hydrogen and chlorine react to form hydrogen chloride I discovered by watching
this video video 1 in fact they go as far as using even blue LEDs to activate the reaction, then in April of 2014 I performed an experiment with an equal
mixture of hydrogen and chlorine gas produced by electrolysis, my setup was so crude back then I’d go as far as calling it ghetto, it was a total of
10 cm3 of mixture, my setup was a glass vial upside down inside a bowl with water to trap the gas inside. I used blacklight to activate the reaction,
but no dice, then I used the piezo sparker from a lighter, and the reaction was quite violent, the vial flew on my face like a rocket on my face,
luckily it didn’t shattered, but left a mark on my forehead. Then I left the whole idea until, recently, around 4 months ago, and I started digging
up the forum for answers and a few posts motivated me to retry the idea, but with some modifications, the main post was by the user mysteriusbhoice(post) and this post here by tacho gave me some ideas.
I first tried using tacho’s idea, it worked, I had some success, but I was using copper contacts and the sparking suddenly stopped and became
infrequent, thus resulting in my worst nightmare, a gas mixture build up, resulting in an explosion, since the idea is to make the reaction happen as
the gas gets into the chamber, thus avoiding dangerous explosions.
Then, I got myself a 4w mercury vapor lamp to try and go on mysteriusbhoice’s idea, unaware at the time about the Cl-Cl bond and reactions of wet
chlorine, I got a quartz glass tube as well, so to protect my lamp from a chlorine filled atmosphere. I spent weeks testing and trying to understand.
I’ve read mysteriusbhoice’s chemical equations, but, I found on wikipedia(here) something more interesting.
In formation it states that HCl can my synthesized by simply Chlorine gas and water by the following reactions:
2Cl2 + 2H2O --- Light ---.> 4HCl + O2
I dug up and I suppose the reactions behind it are:
2Cl2 + 2H2O <.---.> 2HCl + 2HClO
then:
2HClO <.-- Light –.> 2HCl + O2
on the same page it is stated that the reaction can be driven forward by the presence oxides of Cu, Ni or Co, though, this I haven’t tested.
However, I bubbled chlorine gas in water on a tube [photo1] in presence of UV-C light and managed to get hydrogen chloride, I got about a liter with
about 2,5%(w/v) concentration(measured by titration) and around 100 milliliters of roughly 10,7%(w/v) concentration.
photo1
I tested with Manganese dioxide to see if there was any HClO in solution, but no oxygen bubbling. However, this reaction rate is too low for my
taste, not sure if it a higher temperature could help or more light or perhaps some stirring to help drive off the O2 gas which I theorize that could
be driving the reaction back reducing yield. But these are untested considerations sole based on my observations of the experiment and I have no
source to back it up.
Note: I should take this moment to note that at this point it shouldn’t be necessary to point out that UV light can on a long term blind you and
give you skin burns and cancer, UV-C is very unforgiving(short or long exposure), UV-A(blacklight) seems safer, and it is less unforgiving, but still
dangerous on long term exposure.
Then, with this bottleneck wasting the excess chlorine, I tried to put a mixture of hydrogen and chlorine in presence of UV-C light, this time it was
a full gas phase reaction, dry chlorine and hydrogen. The reaction also worked, the chlorine was successfully combined with hydrogen, but still, too
slow of a reaction.
Then, I did the most stupid idea ever, it was about 3 weeks ago then I tested. I couldn’t find the post in question, however, here in this forum,
the same day I was looking and found mysteriusbhoice’s and tacho’s posts, I found some nonsense about using halogen lamps to drive this reaction,
one guy was even sarcastic in his response about whoever was dumb enough to go through with that would need paramedics and a plastic surgeon to remove
the shards of glass from the very possible explosion it could result. At the time I didn’t gave much thought because I thought he could be using the
halogen lamp for the UV, since these are known for emitting UV, however, by reading the HCl page on Enciclopedia Britannica(here) I found out that with temperatures above 250ªC you can make the hydrogen and chlorine gases to combine and generate pure hydrogen
chloride(this information was also supported by a big yellow organic chemistry book I recently bought), then I remembered and old idea about using a
heating element to force the combustion of hydrogen and chlorine mixture, but I was concerned about the highly corrosive environment destroying the
heating element, but halogen lamps make great inert heating elements. Thus I got some cheap ones and put in a 40 ml container with an inlet for H2 and
Cl2 mixture and an outlet for HCl gas[photo2]. I was scared it could explode, so I did it from far away and started by turning the halogen lamp on
first, because my thought process was that if the chamber was hot the gas mixture would instantly react without building up and exploding. And sure
thing, that is what happened, few seconds later, in the outlet tube I saw the pure HCl vapor condensing the air humidity. no explosion but I
wouldn’t count it as safe though, this is very ify.
photo2
Then, after this, I decided to use my brain instead of just following up crazy recipes from the internet or my head and decided to look for detailed
information about the Chlorine molecule and how much energy I actually need to break the Cl-Cl bond and according to this wikipedia page it would take around 2.51eV to break this bond making Chlorine free radicals. Or 58 kcal/mol (which is also supported by the
big yellow organic chemistry book) in the book is also stated that this is a catalyzed reaction, it says that 10000 molecules are formed by each
photon that break a Cl-Cl bond, which should make sense, since this is an exothermic chain reaction. Based on this information, you could look any
visible light energy spectrum chart and see that colors around 450nm and bellow, already are able to supply more than the 2.51eV required, thus
removing the need for UV-C light, in theory, based on this assuming the reaction is occurring at a temperature above 25ºC UVA or even Blue or Violet
light should suffice to make this happen though, I haven’t tested yet.
2 – Making carcinogenic compounds.
As if working with UV light wasn’t enough of a risk factor for cancer, part of the goal was to chlorinate some carbons, which, as we know, most of
chlorinated carbon compounds are known or potential carcinogen compounds. I done some testing with ethanol, since it was what I had available at the
moment, and right away I bubbled chlorine gas into it and… it got pretty warm, and the smell of ethanol faded after some time, giving place to a
“sweet” smell, for lack of a better word, or mildly pungent with a hint of etheral smell. Not sure what became of that, but sure enough, it
didn’t took me too much time to wonder, what if I decided to put a water mixture of ethanol on my UV reactor and bubbled chlorine gas through it.
And I did it… but what I found out was that no chlorination took place, instead, it turned into a clear liquid with an etheral smell that upon
distillation, based on boiling point was compatible with acetaldehyde, I reached this conclusion, by googling the reaction and it turns out the
suggested reaction was this:
Cl2 + H2O <.---.> HCl + HClO
H3C-CH2-OH <.-HClO-.> H3C-(C=O)-H
Don’t remember the source for this, but there was a video on youtube about it, and I’m not sure if the reaction goes like this… it was something
like Hypochlorous oxidation or something like that. I tried some more experiments with ethane and solvents in paint thinner and by raising the
temperature, to around 30ºC I was able to achieve free radical UV based chlorination, however I wasn’t able to test gas phase reactions just yet, I
plan some time soon to try it with butane and see what happens. On a side note, ambient temperature kinda of works… but if the weather is cold,
light alone might not work, I myself had trouble doing it.
3 – The reactors.
With all of that said, there’s not much to be said about the reactors, but some pointers. From my experiments, if you intend to make hydrogen
chloride, UV reactors might not be the way to go, unless the rate of the reaction is increased somehow. Since this is a work in progress, I still
intend to follow up on UV-A LEDs tests for that end, since that data on chlorine bonds was an eye opener for me, because I thought I had to use UV-C
and quartz glass, since standard glass cuts off wavelenghs of 300nm and bellow, so, quartz glass is no longer necessary and UV-C to work with
chlorine, in fact, there was a video in which the god, NurdRage himself, used a high power UV LED in a chlorination video. Now, with that said, wet
chlorine and UV-A light is without a doubt the safest way to go in regards to explosions. However I’m placing my bets on the halogen hot reactor in
which a halogen lamp is used as a heating element to provide enough heat to activate the reaction, I still need to do some more testing, but so far,
no explosions.
As for organic chlorination by free radical mechanism I’m yet to think of a better design than the one with a quartz tube in the middle inside
another glass tube with inlets and outlets for reagents and products, respectively.
Something that should be noted is that in the video I linked at the beginning, even though the reaction is activated by radiation(LEDs) it is quite
violent, so, as I stated before, the safest method in explosion risk point of view is the wet chlorine and UV light route, but the trade off is the
slow rate.
another idea I had, but wasn't bothered to try is a thin "Y" to mix the gases leading to a thin tube of glass, quartz or a chemical resistant metal
filled with sand to increase surface contact and heat it to temperatures over 250ºC either with a candle, burner or electrical heating element with
or without a thermostat controller. It is simplistic and due to the low volume of gases being mixed in this thin tube arrangement the risk of
explosion wouldn't be an issue and better reaction rates could be achieved.
Something I didn't mentioned, but my source for hydrogen and chlorine gases is table salt and water by electrolysis. I'm following my own modified
version of the cells devised by scrap science
for those wondering why the world I'm using glass even under such a risk of explosion, don't, I have OCD and in my head, glass is a better material
for building stuff, even though I should put some effort in minimizing the amount of shrapnel flying in case of an explosion.
and finally...
if you survived until here, either by reading through my little 4 months adventure through the fields of insanity and delirium or by not reading all,
stuff blowing up and getting back to see what happened or get angry at me. I should tell you that throughout most of my experiments I had explosions,
some minor and some major. I had an incident that it was so violent that even the cathode of my electrolytic cell blew up(yes, the damn thing is also
made of glass) and I spent an entire week cleaning drops of sodium hydroxide and shards of glass. luckily, no glass or lye got on me. the only tame
reactions were with wet chlorine and the halogen lamp reactor, however, even though the latter didn't had any flame or bumping, you should still be
careful, for there is a high risk of explosion, but I can't see how the former, wet chlorine and uv, can explode, still toxic as all the rest.
Thanks for your time and attention. I hope this is helpful, either to further develop this method and make it safe or to dissuade people from injuring
or poisoning themselves. I plan to expand this thread as I get more data and results.
|
|
|
unionised
International Hazard
Posts: 5127
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
If you keep up this research, eventually you will get to what they do in industry.
Here's a demo on a small scale.
https://www.youtube.com/watch?v=MtygiCwnEzw
|
|
|
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
Yes, that is the goal here, a poor man's HCl Plant, in fact on the first day I set out to look for this in deciding weather to try it or not, I saw on
wikipedia Hydrogen Chloride page I saw the "HCl oven" and my first prototype was a poor man's attempt at that, which failed due to the fact that I
didn't achieved enough gas generation with my electrolysis cell and instead of a flame I just got popping and explosions, that's why I had to detour
over all of this in order to achieve something. however, if somebody manage to build a better chloralkali cell with a good enough gas flow or have
other means of getting hydrogen and chlorine an HCl oven is far preferable than that of which I got.
|
|
|
mysteriusbhoice
Hazard to Others
Posts: 477
Registered: 27-1-2016
Member Is Offline
Mood: Became chemistry catboy Vtuber Nyaa
|
|
ive made a good HCl process which produces a good amount of HCl by the use of a UV lamp fed from a chloro alkali cell that uses dechlorinated
functionalized PVC membranes with terephthalate linkages where the H2 and Cl2 are passed through the reactor which the flow rate is low enough as to
not cause any explosions.
|
|
|
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by mysteriusbhoice  | | ive made a good HCl process which produces a good amount of HCl by the use of a UV lamp fed from a chloro alkali cell that uses dechlorinated
functionalized PVC membranes with terephthalate linkages where the H2 and Cl2 are passed through the reactor which the flow rate is low enough as to
not cause any explosions. |
I've seen your work, in fact, I not only apreciated it but it motivated me to follow on this little project as well and I've been meaning to ask, how
did you achieved the rate of acid formation on your videos, I mean, in one of them you got fuming hydrochloric acid in a few hours, with UV, but I
just managed a mezzely 10,25% HCl concentration on 2 days straight run, plus, a lot of my chlorine was not reacting, hence the reason I switched to
the halogen lamp insanity.
"NOOOOOO!!! The mixture is all WROOOOOOONG!"
|
|
|
Sulaiman
International Hazard
Posts: 3703
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
EDIT : Ignore this post ... I am dumb
Just an idea with assumptions;
. the electrolyte in the gas generator / electrolyzer will be almost saturated with chlorine,
. If there is no membrane, and the electrolyte is stirred,
irradiating the cathode area with uv may directly produce hydrochloric acid in solution?
________________________________________________________
EDIT: I forgot the basic chemistry ... see next post 
[Edited on 18-2-2021 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
I wouldn't know for sure, because I'm doing it separately, because I want score on the sodium hydroxide as well, plus, I think that the efficiency
would be greately decreased, if it worked at all, because the chlorine is made in the anode, and the irradiation is to create chlorine free radicals
by breaking the Cl-Cl bond and second, any HCl formed as well as the Cl2 would imediately be dissolved in the electrolyte which at this point would be
basic, and all going back to be NaCl with just a small part of HCl leaving the cell.
"NOOOOOO!!! The mixture is all WROOOOOOONG!"
|
|
|
mysteriusbhoice
Hazard to Others
Posts: 477
Registered: 27-1-2016
Member Is Offline
Mood: Became chemistry catboy Vtuber Nyaa
|
|
| Quote: Originally posted by khlor | | I wouldn't know for sure, because I'm doing it separately, because I want score on the sodium hydroxide as well, plus, I think that the efficiency
would be greately decreased, if it worked at all, because the chlorine is made in the anode, and the irradiation is to create chlorine free radicals
by breaking the Cl-Cl bond and second, any HCl formed as well as the Cl2 would imediately be dissolved in the electrolyte which at this point would be
basic, and all going back to be NaCl with just a small part of HCl leaving the cell. |
try using my new partial dechlorinated PVC membranes that have polycarboxylic groups linked to it as ion exchange membranes for chloro alkali process.
way better than ceramic and also quite inexpensive and easy to make.
https://youtu.be/vJfc6dxrllI
|
|
|
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
First full scale test run of the HCl Plant
I did a 30 min test run of the mini plant and got some interesting results, if you feel that there's something wrong with my angle or math, please,
let me know.
Also, I assume most of you already know of that I'm talking about here in regard to the math involved, and most of it could be easily found on the
net, so I won't bore anyone with details of my calculations.
so here are the facts:
My source of hydrogen and chlorine was electrolysis and my method to combine them was halogen lamp's heat.
so, my cell's current was 1,1A for 30 min
based of Faraday's electrolysis law, this should give me 0,728g of chlorine and 0,020g of hydrogen, that was supposed to give me 0,748g of HCl
(ALL OF THIS AT A 100% YIELD)
this was supposed to give me a 15ml solution @ 4,990% w/v
my cell runs at a 5v, so I spent around 2,6wh(for a total of half an hour)
my halogen lamp still needs tunning but it ran at 5v and around 4A resulting at 10wh(for half hour as well) so, 12,6wh total of electricity spent
here.
[I know this data seems out of place and everything, but please, consider the economics here, for those wondering about how much would cost to run
this operation in terms of electricity]
Now, for the sad numbers
by titration, I found out that i had a 2,69% solution, thus, by doing the reverse math, I managed to collect a total of roughly 0,404g HCl diluted on
a 15ml solution.
thus, my overall yield was: 53,998%.
My excuses...
The efficiency of the process is directly tied up to the efficiency of the electrolysis cell(in my case), having said that, even though, I'm confident
in my halogen lamp contraption efficiency and capability to give a good yield based on the amount of gases provided I have to say that I observed a
lot of bubbling, I was providing more gas than the water could dissolve, so, part of my yield went up in the air(literally) and the other part, never
left the electrolysis cell.
points I believe that could be improved:
- the electrolysis cell efficiency(which I haven't tested mine yet), I guess it is time to do as mysteryusbhoice suggested and go to the era of the
ion exchange membrane and abandon the ceramic diaphragm I saw his video in the last comment and it is promising, I'm exited to get the materials and
try myself.
- a better gas trap, since on this run, I saw the water dissolving the HCl, but there was too much HCl and too little contact with the water, this a
considerable part of it was lost to the atmosphera turning my workspace into a death chamber, had I not turned on the ventilation, but still it was
bad, straight out nasty!
"NOOOOOO!!! The mixture is all WROOOOOOONG!"
|
|
|
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
Hello again, yes I am still among the living(not amazing, I know) but, I come with news and shocking discoveries... so, I'm going to highlight some
points here.
Sorry mysteriusbhoice, I still did not got around using any of your amazing ion exchange membranes, though I've followed your work, and it is amazing,
one day, soon I hope, I'll get the materials and get around it, I'm sure I'll have a very efficient design.
Sorry to everyone who thought this thread was dead, and sorry to everyone hoped this thread was dead as well, though I might be if stuff keeps like
this(not important though)
And last but not least, I got some new answers to my last post on this thread, the sad numbers and excuse parts, and It comes from an analysis from
part of my first post and this thing that I found .
lets go over the details... I was using a halogen lamp, what I did not told you, is that I assumed the lamp achieved the required 250C it was an Osram
projection lamp 240W I was undervolting it to 25-30W(sometimes it was eating 5 amps other times 6 amps over 5V constant??? not much sense here, I
know) but today with a thermocouple(arrived recently) I tested and discovered that I was achieving a mediocre 150-180C which was converting only part
of the mixture of H2+Cl2 to 2HCl, which means that even my titration on my last post could be wrong, because chlorinated water is still acidic, so, my
HCl yields could've been much smaller than I reported(even sadder, and also maddening) however, the worst part is that the yield should have been even
greater. why? you may ask, remember that link I posted earlier on this reply? yeah... parasitic reactions, turns out that if you bubble Cl2 on an HCl
solution you end up with more Cl2 destroying the solution, so, my efforts were being sabotaged by the unreacted chlorine. I guess that the reaction
went out of the whazoo and even generated oxygen, but regardless, what is beyond question is that chlorine gas tends to destroy aqueous hydrogen
chloride, of course, if you manage to remove the oxygen or have the rations of Cl per H2O right, it might just work, but I've got no time for that.
New ways?
well, I got new halogen lamps and some glass tubes and also ceramics... and some nichromewire, at this point I'm experimenting with everything.
already managed to get above 250C with a new halogen lamp, and managed to get good high temperatures with nichrome wire(thinking in making some
chemical resistant heating element for a tube reactor, perhaps cover with some ceramic or even glass or even quartz) though, I'm kinda worried about
explosions, for now all have been done on the theoretical this time(differently from where I started this thread) the only tests I have done have to
do with the testing of temperatures due to my new thermocouple, which allows me to see how hot is red hot(as per se) aside from this, I'll enforce
some guidelines for experimetation, I have not yet made another chloralkali cell in a while, I have to make a new, and I remember that due to
hardships endured in the design and construction of such contraption resulted in some warcrime level on problems in efficiency(sorry to all) and
uneven gas generation, sometimes I had more hydrogen some times more chlorine instead of the equimolar amount I should have 1:1 H2:Cl2, thus, I will
try to design the cell in such a way I get more hydrogen than chlorine, to ensure that no unreacted chlorine goes to the final chamber thus
eliminating the parasitic reaction that kills my yields.
Explosions...
Well.. as I said in the beginning and even though I shouldn't repeat this...
THIS IS DANGEROUS AND THERE IS A HIGH RISK OF EXPLOSIONS AND A HIGH RISK YOU MIGHT END UP WITH SHARDS OF GLASS IN YOU, OR WORSE, SHARDS OF CHLORINE
AND ACID RINCED GLASS, OR EVEN WORSE, SHARDS OF QUARTZ.(BELIEVE ME, QUARTZ LOOKS LIKE GLASS, BUT IT DOES NOT HURTS LIKE GLASS)
now that I am sure I will be working with the 250C described in the literature to activate chlorine I'm not so sure about tame reactions, in fact,
even if all goes well(and be sure I'll report it here if I survive, if I not, well, just look for some odd case of explosion on the news) I'll be
taking every measure and precaution possible, but, I'm not working with proper materials or equipment, needles to say that is not ideal and I should
stop, but I won't, and you should not try this, unless you accept the risk of literally dying.... well... I guess that is it, I might update with
designs(though my hand drawing is crap at best) or perhaps the finished reactor with some brand new yield numbers, just know that it ain't gonna be
pretty, in fact it will be some criminal levels of improvisation here, stuff that should be forbidden and it is probably forbidden somewhere.
"NOOOOOO!!! The mixture is all WROOOOOOONG!"
|
|
|
Texium
|
Thread Moved
30-11-2023 at 10:31 |
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
