John paul III
Hazard to Others
Posts: 110
Registered: 28-4-2018
Member Is Offline
Mood: No Mood
|
|
Hypergolic material from Ca(CLO3)2 and organic acids
Calcium Chlorate should react with some carboxylic acids like oxalic acid to form an insoluble calcium salt and chloric acid, which would then
spontaneously start oxidizing said acid, leading to ignition of the rest of the mixture. You should be able to mix the two powders and ignite them
with a drop of water. Just thought of this as a primary for my cannon expermients; has anyone tried something like that already?
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Isn't it hygroscopic? If yes then you don't need to add water yourself. They'll start to react once being mixed.
[Edited on 191026 by fusso]
|
|
|
John paul III
Hazard to Others
Posts: 110
Registered: 28-4-2018
Member Is Offline
Mood: No Mood
|
|
In actual use I would set it up so the chlorate is mixed with another fuel and is separated by pierceable plastic foil from a concentrated aqueous
solution of acid
|
|
|
mysteriusbhoice
Hazard to Others
Posts: 477
Registered: 27-1-2016
Member Is Offline
Mood: Became chemistry catboy Vtuber Nyaa
|
|
tried something similar in the past when I had Ca(ClO3)2 mixed it with sulfur and sugar then after 15 seconds the mix will self ignite with no source
of ignition.
also worked with calcium hypochlorite but replace sugar with charcoal or it will just fizzle.
|
|
|
yobbo II
National Hazard
Posts: 766
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
If you add copper sulphate it will self ignite too. Its dangerous remember.
Yob
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
