Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Test for Vanadium
WSM
Harmless
*




Posts: 5
Registered: 25-2-2010
Member Is Offline

Mood: No Mood

[*] posted on 2-3-2010 at 19:04
Test for Vanadium


Hi All,

I acquired some N-phenylanthranilic acid to test for residual chlorate in a perchlorate cell. The Merck Index reference for N-phenylanthranilic acid lists it's use as a reagent for Vanadium. Does anyone have a clue how this is done?

Please illuminate me if you know. Thanks. :)

WSM
View user's profile View All Posts By User
WSM
Harmless
*




Posts: 5
Registered: 25-2-2010
Member Is Offline

Mood: No Mood

[*] posted on 2-3-2010 at 19:11


I forgot to mention. The reason I'd like to test for vanadium is to determine whether titanium from unknown sources is CP (commercially pure) or an alloy. Many titanium alloys contain vanadium so a positive test for that metal tells me it's the wrong stuff for my application (cathodes for electrochemical cells). Thanks for any help you can offer.

WSM
View user's profile View All Posts By User
not_important
International Hazard
*****




Posts: 3873
Registered: 21-7-2006
Member Is Offline

Mood: No Mood

[*] posted on 4-3-2010 at 04:22


I don't know the details, phenylanthranilic acid is used as a redox indicator being colourkess in the reduced state, pink-purple in the oxidised state, and pale green when re-reduced; it is used as an indicator when V(5) is used as an oxidising titrant. I suspect the use in steel analysis is as a redox indicator at a stage where V(5) is being reduced in a titration with a reducing agent such as Fe(II) ammonium sulfate.

Quick tests that come to mind are a bead test, V giving a yellow bead in oxidising flame and green to blue-green in the reducing flame.

A wet test would be to take a solution of the sample in aqueous HCl and perform the standard H2S precipitation to remove interfering elements, then oxidise the filtrate with hot HNO3 until all Cl is driven off. Then neutralise with 10% NaOH, followed by pouring the sample into a several-fold excess of the same, boil for a few minutes, and filter. Treat with filtrate with a solution of lead and ammonium acetates to precipitate lead vanadate.

The PDF at http://handle.dtic.mil/100.2/ADA075883 talks about the analysis of steels and Al alloys including testing for V.




[Edited on 4-3-2010 by not_important]
View user's profile View All Posts By User
Texium
Administrator
Thread Moved
19-11-2023 at 15:10

  Go To Top