| Pages:
1
2 |
rrkss
Hazard to Others
Posts: 193
Registered: 18-12-2009
Member Is Offline
Mood: No Mood
|
|
Diethyl Ether Disposal
What would be a safe easy way to dispose of some old unused diethyl ether (about 6 months old). Its about 100 mL of ethanol stabilized ether in an
amber bottle. I don't have any peroxide test strips or KI in stock so can't do any tests for peroxides nor do I have FeSO4 to do a reduction.
Would it be safe to evaporate it outdoors in an iron pot or are more elaborate methods required?
[Edited on 29-1-2010 by rrkss]
|
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
As long as the Et2O hasn't been exposed to oxygen e.g. the flask not opened hundreds of times last six months I wouldn't worry..
Myself used up last 50ml of Et2O last month which was about 15 years old, but only opened about 25 times, and that in the last 5 years.
But remember, never evaporate or distill Et2O to complete dryness, if you follow that you'll be safe.
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
Picric-A
National Hazard
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
Burn it 
|
|
|
Taoiseach
Hazard to Others
Posts: 241
Registered: 16-3-2008
Member Is Offline
Mood: No Mood
|
|
Great...
another "how do I expose of expensive and hard to obtain chemicals that most hobbyists will never get their hands on" thread.
I'm just waiting for "how do I dispose of 1kg red phosphorous" or "how do I safely dispose of 100g granular silver" threads...
|
|
|
Picric-A
National Hazard
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
Ether is neither expencive or hard to obtain. It can be made with materials more than readily available from a hardware shop (H2SO4 + C2H5OH) and is
about £5 per litre.
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Picric-A, what you are saying might be true for you, but in other parts of the world things may be quite different.
This kind of thread also irks me, especially if one is talking about useful reagents like in this case. If I really would want to get rid of a
chemical, then I first would see if I could make someone else happy with the chemical. I have obtained quite a few chemicals, because someone else did
not want them anymore and I am thankful that those people did not dispose of these chemicals by destroying them but were thinking of me  .
|
|
|
Taoiseach
Hazard to Others
Posts: 241
Registered: 16-3-2008
Member Is Offline
Mood: No Mood
|
|
Well I can understand that potassium with a brick red crust causes some misgivings, but disposing of 6 months old ether is just plain BS. Especially
since this chemical is very difficult/impossible to obtain in some countries and a lot of home chemists would love to get their hands on such a
bottle.
>Ether is neither expencive or hard to obtain. It can be
>made with materials more than readily available from a
>hardware shop (H2SO4 + C2H5OH)
I agree (altough it is a dangerous procedure). Thats what this forum is about - making hard to obtain and exotic chemicals. Not how to dispose of
them.
[Edited on 29-1-2010 by Taoiseach]
|
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
Picric A: I think you are greatly undervaluing ether. £5/L is a ridiculous price, and from what I've seen over many sources the general guideline is
abour 3-4 times that price. Even if you were to make it you would not reach such an ecomomy; the alcohol required (even mineralised methylated
spirits) costs about that. Once you factor out the energy needed to purify the alcohol, maintain the reaction at ~140*C etc it could even come out to
me more expensive than available sources.
|
|
|
Chainhit222
Hazard to Others
Posts: 138
Registered: 22-8-2009
Location: peach's mailbox
Member Is Offline
Mood: grignard failing to start
|
|
i would "dispose" of it in my lungs... i doubt many users here would approve though hehe
|
|
|
Picric-A
National Hazard
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
My local garage sells 1l bottles of tech grade ether for use as an engine starter for 5.99 each.
Maybe it would be 3x if you buy A.R grade ether but the fact of the matter is the tech grade is easy to purify to 99.9% so why bother.
|
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
Nope, AR grade is far more expensive, I was talking LRG, not tech, but nice find. Does this garage have a name?
|
|
|
Picric-A
National Hazard
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
Burnham garage
|
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
I dont think that that is even tech grade ether; the majority will be petroleum distillates, particularly those which pose a problem when trying to
obtain pure ether. And all the engine starters I have seen are sprays.
|
|
|
Picric-A
National Hazard
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
Nope its not the kind you can buy in spray cylinders which containt <60% ether. This stuff evaporates to dryness and seemes pretty pure.
1 distillation over Na is enough to render it pure.
|
|
|
entropy51
Gone, but not forgotten
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Quote: Originally posted by rrkss  | What would be a safe easy way to dispose of some old unused diethyl ether (about 6 months old). Its about 100 mL of ethanol stabilized ether in an
amber bottle. I don't have any peroxide test strips or KI in stock so can't do any tests for peroxides nor do I have FeSO4 to do a reduction.
Would it be safe to evaporate it outdoors in an iron pot or are more elaborate methods required?
[Edited on 29-1-2010 by rrkss] |
You can easily make FeSO4 by dissolving steel wool in strong CuSO4 solution
with a few drops of H2SO4.
It is probably safe to evaporate outside, but if it contains peroxides they will concentrate and be sitting there after the ether is gone.
Put a little FeSO4 in it before you evaporate it.
Bahamuth is correct in that there is no need to dispose of it just because it's 6 months old. I know that's what the books say, but if kept in a
nearly filled and tightly capped brown bottle in the dark peroxide formation is slow in ethyl ether. Some of the other ethers are more prone
to oxidize.
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I have a bottle of diethyl ether (1 liter, filled almost completely to the cap with just maybe 20 ml of air trapped in the bottle) and this is around
10 years old (I purchased it for a just a few guilders before ether became unavailable at most places). No peroxides can be seen and I am not scared
at all of this. I had another small bottle of ether (100 ml) and this was even older, but never had problems with peroxides forming in this. The only
thing is that I do not use it in distillation setups without first destroying any peroxide, but in general, I think that the problem of peroxide
formation in diethyl ether is highly exaggerated. I am talking about diethyl ether, I have no experience with other ethers, so the scary stories
_might_ be valid for other ethers, but they are not true for diethyl ether.
|
|
|
rrkss
Hazard to Others
Posts: 193
Registered: 18-12-2009
Member Is Offline
Mood: No Mood
|
|
| Quote: | [quote=170701&tid=13333&author=entropy51You can easily make FeSO4 by dissolving steel wool in strong CuSO4 solution with a few drops of H2SO4.
It is probably safe to evaporate outside, but if it contains peroxides they will concentrate and be sitting there after the ether is gone.
Put a little FeSO4 in it before you evaporate it.
Bahamuth is correct in that there is no need to dispose of it just because it's 6 months old. I know that's what the books say, but if kept in a
nearly filled and tightly capped brown bottle in the dark peroxide formation is slow in ethyl ether. Some of the other ethers are more prone
to oxidize. |
I'll make the FeSO4 the way you mentioned. I will get the iron in the correct oxidation state this way?
I used the ether for extractions of oils such as Eugenol and Limonene from emulsions after steam distillation. Its low boiling point allowed me to
seperate the ether from the oil using a hot water bath instead of having to rotary evaporate it.
Since I am no longer doing that sort of chemistry, I don't need the ether and I see no reason why I should store a peroxide forming DEA List II
chemical that I don't intend to use.
[Edited on 29-1-2010 by rrkss]
|
|
|
entropy51
Gone, but not forgotten
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
| Quote: | | I'll make the FeSO4 the way you mentioned. I will get the iron in the correct oxidation state this way? |
Yes,
it should be the greenish ferrous salt, but I believe it needs to be kept slightly acidic.
It sounds as though you could probably use dichlormethane for that sort of chemistry. It's safer than ether, but not good to inhale the vapors.
|
|
|
rrkss
Hazard to Others
Posts: 193
Registered: 18-12-2009
Member Is Offline
Mood: No Mood
|
|
[quote author=entropy51] | Quote: | It sounds as though you could probably use dichlormethane for that sort of chemistry. It's safer than ether, but not good to inhale the vapors.
|
I've substituted pentane as my solvent of choice though dichloromethane is probably another good alternative though much worse for the environment.
I'm gonna treat my ether with the ferrous sulfate solution you explained how to make and then let it evaporate outside to eliminate it in an iron pot
with some paper towels. After the ether is gone, the towels go in the trash. Don't want to burn the solvent since there are regulations against that
and ether has a half life of about 10 hours in the atmosphere so I would be not doing any real polluting. The pot is to eliminate ground absorbtion.
[Edited on 29-1-2010 by rrkss]
|
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
Half a year ago, some not so knowledgeable people at my faculty rotavapped 500 diisopropyl ether; that I found in a old cabinet hidden away, this
bottle was opened in 78....
It was funny to watch them walk to their destined lab to evaporate the ether, with face shields, plastic aprons and leather gloves..., did I mention
that the bottle had visible crystals in it, and a broken cap; either way, no explosion, they most likely added FeSO4 and some other chemicals to break
the peroxides down.
Even so, they were kind of foolhardy doing stuff like that.
Never asked what they did to survive the event though...
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
You can buy diethyl ether on ebay for about £15 per litre. So it can't be that hard to get and i'm sure it would be cheaper if you shop around.
|
|
|
rrkss
Hazard to Others
Posts: 193
Registered: 18-12-2009
Member Is Offline
Mood: No Mood
|
|
Ether is also easy to synthesize just don't use any open flame heat sources. I use a heating mantle for the synthesis from ethanol and a warm water
bath for distillation after the workup. You can just use a bucket of warm water at about 45 degrees celsius to boil the ether, don't even need a
heating source if you are doing it on a small scale.
An excellent procedure is available in prepublication explaining how to do it. After the synthesis, I add 1.5% anhydrous ethanol to my ether as a
stabilizing agent.
[Edited on 30-1-2010 by rrkss]
|
|
|
entropy51
Gone, but not forgotten
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Ethanol stabilizes chloroform against phosgene formation. I don't think it will stabilize Et2O against peroxide formation. Might be interesting to
test some if you have any that's been sitting a while. Shake a few mL with a mL of AcOH containing about 200 mg of KI and see if it turns yellow or
brown.
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
Ive burned some (say 250 ml) of ether, it is rather unspectacular, does not differ much from burning say hexanes, except the flame is much less sooty,
and less yellow.
I say evaporate or burn it.
@Chainhit222 : Inhaling old ether, is really unhealthy. Ether in and of itself is not very toxic, however peroxides and acetaldehyde which
contaminate old ether are toxic.
[Edited on 1-30-2010 by smuv]
"Titanium tetrachloride…You sly temptress." --Walter Bishop
|
|
|
rrkss
Hazard to Others
Posts: 193
Registered: 18-12-2009
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by entropy51 | | Ethanol stabilizes chloroform against phosgene formation. I don't think it will stabilize Et2O against peroxide formation. Might be interesting to
test some if you have any that's been sitting a while. Shake a few mL with a mL of AcOH containing about 200 mg of KI and see if it turns yellow or
brown. |
Sigma Aldrich uses ethanol to stabilize some of their ethyl ether commericially. I assume the peroxides will be reduced when they oxidize the ethanol
to ethanal which then bubbles off or could be further oxidized to AcOH.
http://www.sigmaaldrich.com/chemistry/solvents/learning-cent...
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
