| Pages:
1
..
3
4
5 |
Tdep
National Hazard
Posts: 519
Registered: 31-1-2013
Location: Laser broken since Feb 2020 lol
Member Is Offline
Mood: PhD is done! It isn't good but it's over lol
|
|
Quote: Originally posted by nitro-genes  |
The sulfur nitride is interesting indeed, it is one of these energetic compounds that has been mentioned many times, but for some reason I've never
read any actual hands on experiences about this compound in energetics related fora, perhaps since it requires disulfur dichloride (a rather high
profile chemical to have at home) and a good lab setup. |
I have tried making S4N4 at home quite a bit and I must say it better be a bloody good explosive to be enough encouragement to someone to deal with
sulfur chlorides. My thoughts are it's not worth it (but probably i'm just bitter that my experiments to make it never worked)
|
|
|
Colleen Ortiz
Harmless
Posts: 19
Registered: 16-12-2021
Member Is Offline
|
|
Every organic or inorganic compound must be handled delicately: https://mytutorsource.qa/blog/the-use-of-organic-and-inorgan...
Combustible materials polluted with the majority of organic peroxides can rapidly catch fire and burn quite hotly (i.e., deflagrate). This indicates
that the burn rate is extremely quick, ranging from 1 m/ sec to hundreds of m/ sec. Also, when pressure rises, the rate of combustion increases and
the combustion (or reaction) zone can travel faster than the speed of sound through air or a gaseous medium. In a solid medium, however, the speed of
combustion does not surpass the speed of sound.
Organic peroxides should be kept isolated from processing and handling areas. Keep them away from incompatible materials such as strong acids and
bases, oxidizing chemicals, flammable or combustible liquids, and oxidizing materials (often called reducing materials or agents).
For more information on what materials are incompatible with a certain organic peroxide, consult the MSDS's reactivity data and storage requirements
sections. Construct storage facilities with noncombustible materials that are suitable with organic peroxides for walls, flooring, shelves, and
fittings. Make sure the flooring is impervious to the organic peroxides in the storage. Chemicals should not be able to lodge in crevices on the floor
if they are spilled.
|
|
|
Alkoholvergiftung
Hazard to Others
Posts: 174
Registered: 12-7-2018
Member Is Offline
|
|
to Nitro-genes
Sulfurnitid was somewhat used with PbO2 in primary caps for ammo. For blastigcaps it wasnt reliable. they saw sometimes clouds of sulfur forming and
no detonation.
[Edited on 17-3-2022 by Alkoholvergiftung]
|
|
|
ManyInterests
National Hazard
Posts: 930
Registered: 19-5-2019
Member Is Offline
|
|
That's some good information on organic peroxides, Colleen. But I just wanted to say that I have zero trust in any organic peroxide. Whether it is
TATP, HMTD, MEKP, or whatever. Not even once, not even as a simple 'experiment'. I spent a lot of time and money for equipment and practice in order
to produce the safest primaries that any amateur can make. I made NHN/Nickel Hydrazine Nitrate, which is both very powerful and very safe to use. I
made a few blasting caps that went off brilliantly with them with zero chance of an accidental detonation from handling, loading, or pressing.
It's also why I want to make CHP and LL8. Both of those are also extremely safe to work with, will store well for a good long time, AND are very
powerful.
The only sensitive primary I want to make is DDNP. Which is sensitive, but not some crazy dangerous sensitive like peroxides.
|
|
|
B(a)P
International Hazard
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
| Quote: Originally posted by ManyInterests | That's some good information on organic peroxides, Colleen. But I just wanted to say that I have zero trust in any organic peroxide. Whether it is
TATP, HMTD, MEKP, or whatever. Not even once, not even as a simple 'experiment'. I spent a lot of time and money for equipment and practice in order
to produce the safest primaries that any amateur can make. I made NHN/Nickel Hydrazine Nitrate, which is both very powerful and very safe to use. I
made a few blasting caps that went off brilliantly with them with zero chance of an accidental detonation from handling, loading, or pressing.
It's also why I want to make CHP and LL8. Both of those are also extremely safe to work with, will store well for a good long time, AND are very
powerful.
The only sensitive primary I want to make is DDNP. Which is sensitive, but not some crazy dangerous sensitive like peroxides. |
Unless you have sophisticated equipment I think you would find it hard to pick the difference in sensitivity between DDNP and HMTD in the home lab. I
am not advocating the use of peroxides, but their dangers in comparison to other primary explosives is generally overstated. If they are carefully
made at low temperatures with high purity reagents and not stored, they are no different to other sensitive primaries eg LA, MF, SF and DDNP.
Peroxides have a bad name because they are used by terrorist organisations and kids as their precursors are easily obtained and sophisticated
equipment and or procedures are not required. If DDNP could be made as easily as the usual peroxide substances it would likely have an equally bad
name IMHO.
|
|
|
ManyInterests
National Hazard
Posts: 930
Registered: 19-5-2019
Member Is Offline
|
|
| Quote: | | Unless you have sophisticated equipment I think you would find it hard to pick the difference in sensitivity between DDNP and HMTD in the home lab.
|
DDNP is that sensitive? I think I might reconsider making it then. I'll stick with NHN, CHP, and LL8.
|
|
|
B(a)P
International Hazard
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
| Quote: Originally posted by ManyInterests | | Quote: | | Unless you have sophisticated equipment I think you would find it hard to pick the difference in sensitivity between DDNP and HMTD in the home lab.
|
DDNP is that sensitive? I think I might reconsider making it then. I'll stick with NHN, CHP, and LL8. |
I should say that you could likely distinguish flame sensitivity between DDNP and HMTD. HMTD is noticeably more sensitive to flame due to its
volatility.
|
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
The issue with organic peroxides is that they are easily made into huge quantities and most people will not think about the need for a safer
secondary.
A det cap blowing up for no reason is bad enough. Tens of grams will at minimum result in material damage and attract attention.
Other than research I really dont see why someone with a minimum knowledge in chemistry would synthesize them.
[Edited on 1-4-2022 by Herr Haber]
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
|
B(a)P
International Hazard
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
| Quote: Originally posted by Herr Haber | The issue with organic peroxides is that they are easily made into huge quantities and most people will not think about the need for a safer
secondary.
A det cap blowing up for no reason is bad enough. Tens of grams will at minimum result in material damage and attract attention.
Other than research I really dont see why someone with a minimum knowledge in chemistry would synthesize them.
[Edited on 1-4-2022 by Herr Haber] |
As I said, I certainly was not promoting the use of peroxides. My point was that they are not substantially more dangerous than other primaries as is
commonly stated.
|
|
|
ManyInterests
National Hazard
Posts: 930
Registered: 19-5-2019
Member Is Offline
|
|
| Quote: |
The issue with organic peroxides is that they are easily made into huge quantities and most people will not think about the need for a safer
secondary.
A det cap blowing up for no reason is bad enough. Tens of grams will at minimum result in material damage and attract attention.
Other than research I really dont see why someone with a minimum knowledge in chemistry would synthesize them. |
Yeah. The other problem is that they can't be stored for any period of time. If I made some organic peroxide and something happened to my plans to go
to a remote part of the woods to set them of then... well, I'm in big trouble.
I made caps with NHN and ETN, though either due to some impurity in one of the material, the ETN appeared to degrade considerably. But despite that,
there was zero chance of them blowing up for no reason.
But I did some thinking about DDNP. I spoke with pb(n3)2 (the chemistry youtuber) and he did mention para-DDNP being much better, and that when it is
moistened with a bit of methanol it is much less friction sensitive and can be loaded and pressed into a cap (very gently of course) and left to dry
out before a fuse/electric match is inserted and the cap is sealed with epoxy or something. I will need to investigate it further.
Also my setup isn't basic. I have a rather respectable amount of lab equipment to use. Or maybe it isn't basic in my mind. I don't know.
|
|
|
MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by ManyInterests | | Quote: |
The issue with organic peroxides is that they are easily made into huge quantities and most people will not think about the need for a safer
secondary.
A det cap blowing up for no reason is bad enough. Tens of grams will at minimum result in material damage and attract attention.
Other than research I really dont see why someone with a minimum knowledge in chemistry would synthesize them. |
Yeah. The other problem is that they can't be stored for any period of time. If I made some organic peroxide and something happened to my plans to go
to a remote part of the woods to set them of then... well, I'm in big trouble.
I made caps with NHN and ETN, though either due to some impurity in one of the material, the ETN appeared to degrade considerably. But despite that,
there was zero chance of them blowing up for no reason.
But I did some thinking about DDNP. I spoke with pb(n3)2 (the chemistry youtuber) and he did mention para-DDNP being much better, and that when it is
moistened with a bit of methanol it is much less friction sensitive and can be loaded and pressed into a cap (very gently of course) and left to dry
out before a fuse/electric match is inserted and the cap is sealed with epoxy or something. I will need to investigate it further.
Also my setup isn't basic. I have a rather respectable amount of lab equipment to use. Or maybe it isn't basic in my mind. I don't know.
|
Great tip on the loading with methanol… but there are better primaries. Ones that are nearly impossible to set off on steel to steel friction. Also
more forgiving in they will not detonate in the open but will confined in mg quantities.
|
|
|
ManyInterests
National Hazard
Posts: 930
Registered: 19-5-2019
Member Is Offline
|
|
| Quote: | | Great tip on the loading with methanol… but there are better primaries. Ones that are nearly impossible to set off on steel to steel friction. Also
more forgiving in they will not detonate in the open but will confined in mg quantities. |
Indeed. That's why I intend (or intended, I am not sure right now) to make Para-DDNP (not ortho, which is more sensitive) out of curiosity since it is
technically a 'classic', but NHN/CHP/LL8 will be the stuff I make on the regular if I need to set off my oversized firecrackers.
Also you must remember that I won't be using steel or metal caps for a while. I am still using semi-transparent plastic pen bodies. Also when I press
it is with a wooden dowel. The reason is not just because they're easier to get than metal tubes (the bic round stick is the perfect size for a
detonator and is very close to the dimensions of commercial detonators), but also I do want to make sure there is no degradation of my material, so
when I load the stuff I want to observe for a while to make everything stays OK in there. I can't very well do that with an opaque metal cap.
|
|
|
MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by ManyInterests | | Quote: | | Great tip on the loading with methanol… but there are better primaries. Ones that are nearly impossible to set off on steel to steel friction. Also
more forgiving in they will not detonate in the open but will confined in mg quantities. |
Indeed. That's why I intend (or intended, I am not sure right now) to make Para-DDNP (not ortho, which is more sensitive) out of curiosity since it is
technically a 'classic', but NHN/CHP/LL8 will be the stuff I make on the regular if I need to set off my oversized firecrackers.
Also you must remember that I won't be using steel or metal caps for a while. I am still using semi-transparent plastic pen bodies. Also when I press
it is with a wooden dowel. The reason is not just because they're easier to get than metal tubes (the bic round stick is the perfect size for a
detonator and is very close to the dimensions of commercial detonators), but also I do want to make sure there is no degradation of my material, so
when I load the stuff I want to observe for a while to make everything stays OK in there. I can't very well do that with an opaque metal cap.
|
I never understood the DDNP love. Maybe I am missing something.
|
|
|
ManyInterests
National Hazard
Posts: 930
Registered: 19-5-2019
Member Is Offline
|
|
| Quote: | | I never understood the DDNP love. Maybe I am missing something. |
My love or in general (there is a sticky thread for it on this forum after all). I don't really have a love for it. Just a mild curiosity.
But if I have to speculate it is probably because of all the primaries used commercially it is one of the easier to make, and in all the past
energetics guides published on the internet it is often listed as the 'best' of the bunch they have. Which isn't saying much since those guides are
often packed with organic peroxides and very dangerous secondaries like methyl nitrate and other such stuff (I'm looking at the improvised munitions
handbook here).
If they knew about CHP in the 70s and 80s they would have probably listed that as the go-to primary instead of HMTD.
|
|
|
MineMan
International Hazard
Posts: 1004
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
It’s not the best. It’s a 2nd gen primary. CHP is not a primary, it’s a DDT secondary.
Several options, I wouldn’t even look at DDNP.
|
|
|
ManyInterests
National Hazard
Posts: 930
Registered: 19-5-2019
Member Is Offline
|
|
And CHP is also flame sensitive, which makes it very easy to use.
You know what. I keep flipflopping in my mind as to whether or not to try to make DDNP. I figure this is maybe my brain's way of telling me not to try
it...
|
|
|
Microtek
National Hazard
Posts: 869
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
There's a lot of interesting chemistry in making DDNP. Diazotisation is a very valuable synthetic method that can be used to make a lot of different
compounds. So if your interest is not solely the best primary, but also some of the chemistry, I would recommend doing it.
|
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
No heavy metals so greener than lead styphnate and serves the same purpose in mixes with other primaries: to increase flame sensitivity.
Also, it's an old compound compared to some others so maybe people and the industry feel safer with it as it is tried and tested.
Those would be my reason atleast. Also, I assume anyone familiar with picric acid would be interested just for the chemistry.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
|
| Pages:
1
..
3
4
5 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
