Pages:
1
2 |
yobbo II
National Hazard
Posts: 769
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
I think this is an 'Iodine' stopper.
https://www.sciencemadness.org/whisper/files.php?pid=625589&...
How does having a funnel neck allow an airtight seal without grease?
Yob
[Edited on 13-1-2025 by yobbo II]
|
|
drakedevel
Harmless
Posts: 9
Registered: 20-12-2024
Location: California, USA
Member Is Offline
Mood: No Mood
|
|
I agree, that stopper does look like one that goes with an iodine flask.
The wet ground glass joint is what provides the airtight seal, just like with grease. The funnel neck provides a convenient way to get the joint
thoroughly wet and supplies a reservoir of excess liquid so evaporation takes longer to compromise the seal.
|
|
SuperOxide
National Hazard
Posts: 501
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by Texium | And this is the $5 Bargain Bin. Every piece in these pictures costs $5, and if you order at least $50 worth of chemicals and/or equipment from me,
I'll throw one of your choice in for free, while supplies last.
B5A 2000 mL Kimax RBF, neck is broken. Flask has some external scratches/etching.
B5B 500 mL Pyrex Florence flask, no ground glass joint, small crack in the top of the neck but still usable.
B5C 600 mL Pyrex Florence flask, top of neck lip is ground glass as if it was designed to fit flush with another piece and be clamped together
B5D 125 mL Pyrex distilling flask, like-new condition
B5E 250 mL Pyrex iodine flask. Takes 24 mm stopper. Sold
B5F 250 mL Bellco Erlenmeyer flask with extra long, wide neck.
B5G 250 mL heavy-walled Pyrex filter flask with broken hose barb
B5H 200 mL Kimax volumetric flask with unusual flared top
B5I 24/40 Kjeldahl bulb with hose barb outlet
B5J Pyrex gravity chromatography column with fritted disc at bottom and glass stopcock. Will provide fitting
stopcock. Sold
B5K Pyrex chromatography column with 125 mL solvent reservoir and glass stopcock. Will provide fitting stopcock. Takes 19
mm stopper, which may be provided if I find more. Sold
B5L 60 mL Pyrex addition funnel with glass stopcock and long stem Sold
B5M ~30 mL addition funnel, angled. Will provide fitting glass stopcock.
B5N Tiny bubbler
B5O 25 mL Dean-Stark trap without ground glass joints. Will provide fitting glass stopcock.
B5P Huge 3-way glass stopcock
B5Q ~1 L Pyrex bottle with 2 24/40 joints
B5R 200 mm Pyrex Vigreux column without ground glass joints.
B5S Large glass tube with 24/40 male joint on one end and 45/50 male joint on other end
B5T Weirdly tall Pyrex 24/40 "h" still head for vertical distillation setup
B5U Pyrex 24/40 odd angled adapter Sold
B5V Unusual Pyrex still head with 2 24/40 male joints and one 19/38 female joint
B5W Kontes 24/40 Y adapter
B5X Pyrex 29/42 tube for cold trap or gas bubbler Sold
B5Y Ace 29/42 tube for cold trap or gas bubbler Sold
B5Z Large Pyrex Dean-Stark trap (?) with male 24/40 joint and female 29/42 joint. Bottom joint is broken but still intact enough to work.
B5AA Strange giant reactor thing. 60/50 center joint, 24/40 and 14/35 side arm joints. Third side arm is broken off.
[Edited on 1-10-2025 by Texium] |
Just curious, what could B5S ("Large glass tube with 24/40 male joint on one end and 45/50 male joint on other end") be used for? Im curious why it
has two male joints instead of two female joints (but maybe im just more used to seeing tubes with female joints on them)
|
|
Texium
Administrator
Posts: 4638
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: Preparing to defend myself (academically)
|
|
I have no clue, and that is why it is in the bargain bin
|
|
Texium
Administrator
Posts: 4638
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: Preparing to defend myself (academically)
|
|
Rotovaps
First off I have 2 Büchi R-200 that are in working condition (one pictured), as well as one R-210 in working condition (pictured) and another one
that I'll sell for parts. Vapor duct is included, but I do not have the condensers or water baths for these.
R-200, working, vapor duct included: $300 (2 available)
R-210, working, vapor duct included: $300 (1 available)
R-210, for parts: $150 (1 available)
Next up, I have this Büchi Rotavapor-R (it's so old it doesn't have a model number, but the design is very similar to the R-110). This one has been
around the block on this forum. I bought it from Phosphor-ing in 2017 who in turn bought it from Sauron in 2010. It works fine, but I would rather keep a complete R-200 that I have for myself. This one I would like to sell with all the parts
included that are shown in that picture on the right:
- Motor/base
- Condenser
- Vapor duct
- Good condition KD-22 shaft seal
- 1000 mL collection flask with ball joint and stainless steel clamp
- Water bath
I'm asking $600 for the lot.
I also have three more coil condensers of the type that fit the R. The plastic flange ring attached to these is not compatible with the R-200 or
R-210, thus I'm selling them separately. $200 each.
Finally, I have a B-461 water bath, which doesn't match any of the rotovap bases I have. I haven't tested it, so I'm not sure it works. If it works,
I'll ask $100 for it, if it doesn't, I'd take $50. Let me know if you're interested, and I'll test it.
|
|
SuperOxide
National Hazard
Posts: 501
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Btw, I received my order of some 45/50 condensers and reagents from Texium last week - Excellent quality and price. Very happy with my purchase
|
|
Pages:
1
2 |