| Pages:
1
2 |
katyushaslab
Hazard to Self
Posts: 81
Registered: 19-1-2021
Member Is Offline
Mood: precipitating
|
|
If you are in mainland Europe, I suggest looking up the "E number" for KNO3, and simply buying it as a food additive. A Polish company by the name
"Browin" sells it by the 100g pouch, amongst others. Prices vary a bit.
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Thanks, I can get otc KNO3 for 10€/kg from garden fertilizer by recrystallization.
The purpose of turning AN to KNO3 is more of procedural question.
|
|
|
katyushaslab
Hazard to Self
Posts: 81
Registered: 19-1-2021
Member Is Offline
Mood: precipitating
|
|
Ah, so I can maybe help with that: you can do the double displacement with KCl and NH4NO3 to yield KNO3 and NH4Cl. That's how I used to do it, before
AN became hard to get after being replaced in cold packs by urea. I can try look for some old notes.
Now for cleaning the KNO3, a recryst would do the trick, but one avenue I never explored (that seems interesting) would be to sublime the NH4Cl off.
It sublimes around 330*C, and KNO3 doesn't decompose below 500*C.
Unfortunately in my country nitrates as fertiliser is almost impossible without owning a farm, due to laws on explosive precursors we passed in the
1970's which banned a few things.
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
It would likely require huge amounts of energy to sublime it off, and also NH4Cl does not have sublimation but decomposition temperature, upon which
NH3 and HCl evaporate, condensing upon cooling. These could interact with KNO3 at some level, and also, any remaining compound form NH4NO3 will cause
issues upon heating. I wouldn't carry out a reaction by thermal decomposition that has AN as an input reagent, unless I could make sure it won't cause
issues.
I've always considered these raw materials as bulk, which are usually in multi kg scale, so anything that works on test tube or mini scale is not so
scalable at these more special methods. Purifying otc fertilizers for useful reagents tends to require plastic buckets as reactor size.
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
I finally had some time to test my long-standing solution of fertilizer extract liquid.
When CaCl2 was added, a significant amount of precipitate fell out. It appears that it contains soluble sulfates and phosphates, whatsoever.
My plan herefore would be to crash out all sulfates and phosphates with CaCl2, filter, and then concentrate the solution, until ammonium chloride
starts to precipitate. The solution would be likely so concentrated on nitrates that it will freeze in the filter, so it is likely it has to be hot
filtered. The calcium and ammonium nitrates will remain liquid for very long, as they form a solution of 4-10kg/L of water at 100C, and it should be
possible to crash basically all ammonium chloride out while keeping the solution liquid at 100C. So the final extract should be mostly composed of
ammonium and calcium nitrates. It would be possible to further reduce the ACl amount by dissolving it in ethanol, as ammonium chloride has 0.6%
solubility, and ammonium nitrate has 3.6% solubility. If all calcium would be crashed out, ammonium sulfate would do the job, or if water soluble
nitrate is needed, sodium carbonate will also do. The calcium sulfate or carbonare sludge is not impossible to filter, with suction it's slow, but
filtering a few liters can be carried out in a couple of hours with passive vacuum.
Hence it would be viable to extract both useful quality ammonium chloride and a nitrate feed source for producing nitric acid. Calcium nitrate can be
well mixed with any water soluble nitrate in quite high ratios and still be extractable from a reactor after the distillation, as NurdRage proved.
Any flaws? Any improvements?
|
|
|
yobbo II
National Hazard
Posts: 764
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
The problem with the 'crashing out' is that most of these compounds do not 'crash out' as they are fairly soluble. Calcium Sulphate will 'crash out'
as it is 'insoluble.
A patent that goes into detail on making KNO3 and Amm. Chloride is US 3,595,609
(attached). It gives a Janecke diagram of the reciprocal salt pair(s).
KNO3 and Amm. Nitrate form a solid solution so a recrystallization will always be necessary (imo).
We need a Janecke diagram expert dude on the board!
Yob
Attachment: US3595609_KNO3_FROM_AN.pdf (749kB)
This file has been downloaded 238 times
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Thanks for the link, although the file doesn't work.
https://patents.google.com/patent/US3595609A/en
It's a basis for test. My liquor has something that instantly crashes out with added calcium chloride, and it's sulfate and phosphate salts are known
low sol compounds. Adding KCl will also precipitate instantly something, possibly potassium sulfate.
|
|
|
yobbo II
National Hazard
Posts: 764
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Strange as it works for me ok.
Yob
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Now it works. Strange as it is. 
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
