| Pages:
1
..
15
16
17
18
19
..
81 |
Turner
Hazard to Others
Posts: 197
Registered: 2-12-2013
Member Is Offline
Mood: No Mood
|
|
It's not interesting at all to make an ANNMAL cap, not to mention terribly unreliable. No, there's zero chance of it detonating from pressing it. RDX
is probably the least sensitive material I would ever use in a detonator.
|
|
|
Vpatent357
Harmless
Posts: 22
Registered: 10-7-2014
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Turner  | It's not interesting at all to make an ANNMAL cap, not to mention terribly unreliable. No, there's zero chance of it detonating from pressing it. RDX
is probably the least sensitive material I would ever use in a detonator.
|
For me, it seems interesting since it allows to make a detonator safely at the last moment and 0.2g SADS can't do damages or very little.
The guy in the video was exploding 20g to more 100g boosters of activated ANNMAL directly with a single cap 200mg SADS.
Why you said "No, there's zero chance of it detonating from pressing it"? for what reasons then.. because i think this guy already made it
Small blasting caps, fingers safe!
|
|
|
NeonPulse
Hazard to Others
Posts: 417
Registered: 29-6-2013
Location: The other end of the internet.
Member Is Offline
Mood: Isolated from Reality! For Real this time....
|
|
I doubt it would work as you will have problems with critical diameter in a 1ml syringe. pressing ANNMAL is not likely to make it detonate. Also very
small AN charges may not even detonate at all especially when pressed. The only other way is to give it a try.
|
|
|
bbartlog
International Hazard
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
Bit of a thead necro, but I just wanted to note that DampRid, despite its MSDS and labeling, contains some single digit percentage of some impurity.
Probably irrelevant if you're just using it to dry something, but for metathesis reactions it may cause issues. I tried to synthesize 2 moles of
CuCl2 via CuSO4 + CaCl2 (as DampRid), with followup addition of a small amount of oxalic acid to clear the remaining
CaSO4 from solution. But boiling down precipitated several grams of an additional white substance that formed fibrous crystals. I'm
guessing this is some anti-caking agent that is added to stop the DampRid from clumping. Not a showstopper but if you really want 99+% pure
CaCl2 you should use something else.
The less you bet, the more you lose when you win.
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
@bbartlog,
So if I do understand correctly:
CuSO4 + CaCl2 --> Cu(2+) + 2Cl(-) + CaSO4(s)
But
CaSO4 <==--> Ca(2+) + SO4(2-) (at ambiant T° solubility is > 15g/L)
then you try adding oxalic acid to precipitate Ca oxalate and generate sulfuric acid...
HO2C-CO2H <==> 2H(+) + (-)O2C-CO2(-)
Ca(2+) + (-)O2C-CO2(-) <--==> Ca(C2O4)(s)
2H(+) + SO4(2-) <==> H2SO4
The problem is antagonist equilibriums...
H2SO4 is way stronger acid than oxalic.
Ca oxalate is weakly soluble much more than Ca sulfate.
So probably you get intermediate reactions because H2SO4 dissolution (acidity) forces oxalic acid to be present as the molecular species and not as
the dianion.
Or you get a weird intermediary system with CaHSO4 and Ca(O2C-CO2H)2 because both H2SO4 and HO2C-CO2H are diacids...
[Edited on 29-8-2014 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
| Quote: Originally posted by bbartlog |
Bit of a thead necro, but I just wanted to note that DampRid, despite its MSDS and labeling, contains some single digit percentage of some impurity.
Probably irrelevant if you're just using it to dry something, but for metathesis reactions it may cause issues. |
Indeed!
Calcium chloride is a common garden soil supplement, used by gardeners & vegetable growers after heavy rains deplete soil of available Ca... Which
can cause your tomato/pepper/squash plants to develop "Blossom End Rot"
Last year, I thought the same thing... Damp rid, which I had on hand, must be pure CaCl and would be just the thing to use when my garden plants
showed signs of Ca shortage after a series of heavy rains.
Whatever the other chemical(s) in DampRid may be, they are not very water soluble. A whitish blanket of undissolved material remained after dissolving
most of the DampRid in hot water, decanted the solution from this and used it anyhow. Didn't hurt my tomato and pepper plants, but I will buy garden
supplement grade or ice melter grade calcium chloride for either chemistry or garden use in the future.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
greenlight
National Hazard
Posts: 737
Registered: 3-11-2014
Member Is Offline
Mood: Energetic
|
|
I just found an MSDS for the Damprid brand moisture absorbers and in the composition/information on ingredients section it states:
1. Calcium chloride 60.00-100.00%
2. Sodium chloride 1.0%-5.0%
3. Potassium chloride 1.0%-5.0%
Shame they can't give you exact percentages. But this doesn't clear up the fact that the additional chem's added are not water soluble because
obviously both Potassium chloride and Sodium chloride are.
Is there something else added they don't mention?
[Edited on 6-11-2014 by greenlight]
[Edited on 6-11-2014 by greenlight]
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
There is an anti cakeing chemical added, as noted above.
There is also a formulation with scent added, I'd avoid that product.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
just a quick question
could you make meta nitro benzoic acid by treating nitrobenzene with phosgene in the presence of catalysts like AlCl3 or glacial acetic
acid(they use acetic acid while brominating the ring to activate the bromine) and hydrolysing it
[Edited on 7-11-2014 by CuReUS]
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Why not just nitrate benzoic acid? The meta product will be predominant.
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
actually i came across this in my lab record from my undergrad days .i think we had a synthesis challenge at the end of the term and our teacher had
given us nitrobenzene as the starting product.What i ended up doing back then was another nitration to get meta dinitro benzene which i selectively
reduced using NH4HS to get meta nitro aniline ,which i diazotised and treated with CuCN to get meta nitro benzonitrile which i finally
hydrolysed to get meta nitro benzoic acid
looking back i think if you could just treat it with phosgene ,my work would have been much easier ( and i might have won the prize ) .IIRC ,the guy who ended up winning used a grignard approach.
also nitrating benzoic acid is not a good idea because of the deactivating nature of the COOH group
see this http://webcache.googleusercontent.com/search?q=cache:XI5fQ0f...
|
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
IMHO a Grignard approach is usually indicated when making an aromatic acid barring other factors of course. Yield is usually excellent and the
reactions are easy to run.
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
In my organic chemistry class we nitrated methyl benzoate to methyl m-nitrobenzoate. I can't imagine the acid to be much harder to nitrate than the
methyl ester.
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by chemrox | | IMHO a Grignard approach is usually indicated when making an aromatic acid barring other factors of course. Yield is usually excellent and the
reactions are easy to run. |
| Quote: Originally posted by Cheddite Cheese |
In my organic chemistry class we nitrated methyl benzoate to methyl m-nitrobenzoate. I can't imagine the acid to be much harder to nitrate than the
methyl ester. |
chemrox-but aren't aromatic grignards very difficult to initiate
during my undergrad ,we once made phenyl magnesium bromide so that we could react it with methyl benzoate to make triphenylmethanol
we spent almost 45 minutes trying to react the magnesium with bromobenzene by scratching the magnesium at the bottom of the flask as our teacher had
instructed
some people even made a hole through their flask and the magnesium ignited and caused quite a chaos that day
but the guy who won was damn smart
he used ethane 1,2 dibromide as an initiator to kick start the reaction ,and it worked like a charm.
maybe it was also because of the withdrawing nature of the nitro group
cheddite-the orsyn page that i linked uses methyl benzoate as the starting material .maybe the ester is a lesser deactivating group than the acid
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
In my organic class, we also made triphenylmethanol, but from benzophenone and the Grignard reagent. The phenylmagnesium bromide formation went
easily. We ground up the magnesium metal immediately before adding it to the reaction mixture.
[Edited on 8-11-2014 by Cheddite Cheese]
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
IIRC ,we used magnesium turnings for the reaction.
but dont you think using Mg powder or dust would be dangerous ,considering that metal dusts form explosive mixtures with air and there is copious
amounts of ether around to add fuel to the fire
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Grignard with a nitroaromatic?
Would'nt the nitro group be reduced by the Mg into Ar-N=O, Ar-NH-OH, Ar-N=N(O)-Ar, Ar-N=N-Ar or Ar-NH2?
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
About the activation of the Mg towards aromatic halide for Grignard's reaction, one may also use a tiny I2 cristal.
About the activation by Br-CH2-CH2-Br...it may react via an unwished Wurtz coupling pathway or dehalogenation...
Ar-Mg-Br + Br-CH2-CH2-Br --> Ar-CH2-CH2-Br + Ar-CH2-CH2-CH2-CH2-Ar + MgBr2
Br-CH2-CH2-Br -Mg/ether-> Br-CH2-CH2-CH2-CH2-Br + (-CH2-CH2-)2 + (-CH2-CH2-)n + CH2=CH2 + MgBr2
[Edited on 14-11-2014 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
this is quite interesting ,i didn't know that grignards could act as reducing agents
BTW,treating nitrobenzene with phosgene followed by subsequent hydrolysis works ,i checked it out
good yield of meta nitro benzoic acid is obtained ,although there is a little coupling as well
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
I was always taught that deactivation only really becomes an issue after two deactivators on a ring.
Contrary to what some may have been led to believe, nitration of benzoic acid is commonplace, and there is a qualitative test based on it (Mohler's
test).
In fact, dinitration is possible without complication (PMCID: PMC1197580 Biochem J. Oct 1951; 49(5): 700–704.)
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
but i remember that one of my friends from that undergrad batch tried a friedel craft alkylation of nitrobenzene followed by KMnO4
oxidation for getting meta nitro benzoic acid
she was ecstactic that she had worked out the shortest route among all of us (the grignard guy was sceptical though )
sure enough ,she failed miserably and became the butt of all jokes for the remaining term
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by CuReUS |
but i remember that one of my friends from that undergrad batch tried a friedel craft alkylation of nitrobenzene followed by KMnO4
oxidation for getting meta nitro benzoic acid
she was ecstactic that she had worked out the shortest route among all of us (the grignard guy was sceptical though )
sure enough ,she failed miserably and became the butt of all jokes for the remaining term |
You are comparing two very different things here. First, the theory means nothing without the data. You can apply the theory or extrapolate from a
named reaction to a new substrate and impress a professor in lecture, but fail miserably to get a lab result due to the most substrate-specific
molecular quirks.
The way this is often taught is that the nitronium ion is a very strong, rich electrophile relatively speaking. Nitration of bromobenzene, dinitration
of benzene, FC alkylation of polybenzenes, and similarly deactivated benzenes (not nitro) have been reported in literature, to further support the
notion that deactivation is a guideline rather than a rule (the first being a common undergraduate laboratory procedure in years past).
Contrast with FC acylation, for example, which often gives only or predominantly one acylation of benzene due to deactivation. It sort of makes sense
that having the electron deficient Lewis acid catalyzed EAS alkylation mechanism work on a similarly deactivated benzene would fail.
The specifics get interesting: DOI: 10.1021/jo00299a051
|
|
|
DubaiAmateurRocketry
National Hazard
Posts: 841
Registered: 10-5-2013
Location: LA, CA, USA
Member Is Offline
Mood: In research
|
|
https://www.youtube.com/watch?v=RdYtd0rxxYk
I just wanted to post this video, beautiful effect of the explosive, looks like TNT.
|
|
|
VladimirLem
Hazard to Others
Posts: 204
Registered: 24-5-2010
Member Is Offline
Mood: Have no fear <Vlad> is here.
|
|
Hi
Does anyone have a synthesis for ETN using 95%< HNO3 + 95%H2SO4+ eritrol ?
I have a lot of synthesis pdfs for ETN, but they all just uses nitrate salts/65%HNO3+H2SO4
I dont think that i want to make it that way, cause i have enough RFNA atm and dont want to have a (partly) underitrated yield
Vlad
|
|
|
Turner
Hazard to Others
Posts: 197
Registered: 2-12-2013
Member Is Offline
Mood: No Mood
|
|
I have tried ETN synthesis with anhydrous nitric acid and sulfuric acid a few times and I am still not sure why but I could never get above 60% yields
with any process.
This describes a synthesis of ETN with pure nitric and sulfuric acids:
http://energetics.chm.uri.edu/system/files/ETN%20Paper%20acc...
|
|
|
| Pages:
1
..
15
16
17
18
19
..
81 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
