Pages:
1
2 |
mert
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 80
Registered: 4-3-2006
Member Is Offline
Mood: No Mood
|
|
AgNO3......?
how am i a AgNO3 solution(high pure and low pure) produce with cheap via in a laboratory....?
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
First find some cheap silver. Then tell me how I can get some.
The old standby is to dissolve silver coins in nitric acid, evaporate to dryness, then fuse the silver nitrate. Copper nitrate, and the nitrates of
several other contaminating metals, is less stable to heat than silver nitrate and decomposes to the oxide. After cooling the silver nitrate is
dissolved in distilled water and filtered off from the copper oxide. Repeat the operation once or twice, then crystalise the silver nitrate.
Electrolytic refining of the silver can be done as well.
You'll need pure nitric acid, check the treads on making HNO3. And go the the 'library' section, download some of the old general or inorganic
chemistry books; they often tell how to make reagents.
|
|
Cesium Fluoride
Harmless
Posts: 48
Registered: 26-1-2005
Member Is Offline
Mood: Cupric
|
|
Not sure where you at, but in the United States...Dimes made before 1965 contain 89.24% silver and 10.76% copper. Quarters made before 1965 are 90%
silver and 10% copper. Modern day dimes and quarters are 91.67% copper and 8.33% nickel. Silver solder is another source.
|
|
The_Davster
A pnictogen
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Go down to your local coin collector store, they usually sell silver by the ounce. Cost me around 10$ CDN an ounce.
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
[rant]The price of silver has doubled over the past 2 years and may soon triple over the past 3 years...Don't buy high they say, but high might be
later rather than sooner. They said gold prices wouldn't soon go back up with the Swiss dumping and all...the price has nearly tripled since then. As
long as industrialization + population growth continues, demand will reduce supply of all but the most common metals like zinc(the price of which has
more than doubled in less than a year)...copper has quadrupled over 4 years, new mines coming or not. You might want to buy now, even though you're
nowhere near the ground floor; which might not be coming back anytime soon.[/rant]
|
|
mert
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 80
Registered: 4-3-2006
Member Is Offline
Mood: No Mood
|
|
everybody alot thanks. i have the chemicals. so i can just do it.i am working a lab . i will try doing it tomorrow
|
|
neutrino
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Fusion leaves the silver salts and destroys the others? Given the instability of Ag+ ions, I would think it would be the other way around.
I made my silver nitrate by a very simple method. First dissolve the coin in nitric acid (any concentration is fine if you have heat and time).
Evaporate to get crystals and wash them with ethanol until the blue color disappears. Copper nitrate is ~10x more soluble than silver nitrate in
ethanol, so you're eventually left with almost pure silver nitrate crystals.
If you want to recover the silver you washed away, just throw in some copper wire or vitamin C.
|
|
garage chemist
chemical wizard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Silver is commonly purified by dissolving the alloy in HNO3 and adding HCl. Copper stays in solution, and silver precipitates as AgCl.
AgCl can be purifed by dissolving in conc. NH3 solution (forms diamminesilver complex, AgCl is reprecipitated upon acidification) and filtering. This
is only necessary when mercury is present (Hg(I) forms an insoluble chloride too, but this doesn't dissolve in NH3).
AgCl can be reduced to the metal sponge by hot NaOH solution + sugar (I tried it, it works very good- suspend AgCl in a bit more than equimolar amount
of NaOH solution, heat to about 90°C and slowly add sugar solution while stirring vigorously).
Then redissolve in HNO3, evaporate and you have your pure AgNO3.
|
|
skippy
Harmless
Posts: 35
Registered: 10-4-2004
Member Is Offline
Mood: No Mood
|
|
Isn't the silver ammonium complex dangerously explosive? Felt it was important to warn people!
Silver chloride will disolve in DMSO and can be precipitated by dilluting the DMSO with water. I read an abstract on it and I believe they added
excess chloride ions to the DMSO via calcium chloride and that increases the solubility of the silver chloride.
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Quote: | Originally posted by neutrino
Fusion leaves the silver salts and destroys the others? Given the instability of Ag+ ions, I would think it would be the other way around...
|
Empirical data trumps intuition:
Cu(NO3)2 , 3H2O MP 114.5 C, -HNO3 @ 170 C
AgNO3 MP 212 C, decomp. 444 C
Silver nitrate was melted and cast into sticks for use in cauterization, in that form it was know as lunar caustic.
If you ever owned "The Boys Big Book of Exceedingly Dangerous Science Things" or similar, you would be familiar with this method. It was common in
amateur science boooks up to WW-II.
This works well for technical grade silver nitrate, especially if you evaporate the AgNO3 filtrate and do the fusion again. Use a fine filter, coffee
filters are not going to cut it and likely will reduce some of the silver nitrate. Use good grade filter paper, or better fine fritted glass.
For high purity, dissolve the tech nitrate in distilled water, then precipate AgCl with pure HCl (make your own constant boil ing grade via
distillation, leaves behind the iron in tech grade). Don't add too much HCl, best to calculate about how much is needed, add a bit less than that,
then add more slowly until no more AgCl is formed.
After that follow garage chemist's NaOH and sugar to get pure silver or silver nitrate. This leaves behind less noble metals, some of which will
survive the fusion. Precipitating the chloride from the original alloy solution tends to occlude some copper in the silver chloride.
The fusion method aworks well with several inorganic compounds. Manganese sulfate is one, it melts at 700 and decomposses around 850; the iron
sulfates fall apart well before then, iron being a common impurity in technical grade manganese compounds.
|
|
YT2095
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
a slightly different method is to dissolve your coins (or whatever) in the nitric acid, then put in thick copper to displace all the silver, filter
out your silver and wash well.
then add this silver to fresh nitric acid.
I store mine as a soln with a little excess silver in the bottom of a light-tight bottle.
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
Engager
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 295
Registered: 8-1-2006
Location: Moscow, Russia
Member Is Offline
Mood: Lagrangian
|
|
Sorry for bad english ![:(](./images/smilies/sad.gif)
The best way to make pure AgNO3 is to use silver alloy coins as starting material. Silver coins are always made from copper-silver alloy. First of all
check out the fineness of silver in coin, it's always printed on the coin some place. For example if you see fineness .700 or just 700 that means that
coin contains 70% of silver and of 30% copper. Weight the coin and calculate weights of copper and silver. Now you can proceed.
1) Dissolve the coin in 20-40% HNO3, process takes some time and may be accelerated by addition of hydrogen peroxide. After that you must transfer a
part of the solution to another flask,the part in % by volume is calculated by the rule: % of copper in coin alloy is multiplied by 3. For example if
coin if .900 fineness that means that 10% is copper you have to transfer 30% of solution to another flask.
2) Transfered solution is threated with KOH, that results in formation of Cu(OH)2 and Ag2O mixture, KOH is added until they stop to appear (you can
also calculate the mass of KOH needed if you want, using the formula [weight of Coin in g] = Wc ; [Cu amount in wt %] = Cu% ; [Ag amount in wt %] =
Ag% ; [weight of KOH] = WKOH : WKOH = ((Wc*Cu%*2*56.1/63.5) + (Wc*Ag%*56.1/107.8)) * (Cu%*3) gramm). The preticipate is filtered of and washed with
large amount of water, and is added to the remaining part of starting coin solution and is well mixed. That results in preticipation of all copper
part from solution in the form of insoluble Cu(OH)2, leaving the pure silver nitrate solution:
Ag2O + Cu(NO3)2 + H2O => 2AgNO3 + Cu(OH)2
You will see that blue alloy solution (because of copper cations) will turn to almost colorless. Cu(OH)2 is filtered off and discarded.
3) Pure AgNO3 solution is evaporated on open gas burner to form pure solid silver nitrate. If all the mesurments during the process are taken
carefully AgNO3 product will be analytical grade.
[Edited on 24-8-2006 by Engager]
[Edited on 24-8-2006 by Engager]
[Edited on 24-8-2006 by Engager]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Engager, what if your initial solution is still acidic. In that case not all copper will be precipitated as Cu(OH)2. When you dissolve silver/copper
alloy in HNO3, then you always need excess HNO3, otherwise not all metal dissolves.
Another point is that you will never get analytical grade chemicals from a single step process. Even if the procedure works OK, you need to
recrystallize the AgNO3 in order to make it really pure.
Final point: Using a pre-computed amount of KOH is very tricky. KOH is very bad with respect to composition. Commercial high quality KOH may be less
than 90% pure, the rest being water. It can also be 85% pure, the rest being water, or maybe 95%. Who knows..... KOH can be very pure, except for
water content and the amount of water in it is very variable. So, yoy need to add KOH, until no more precipitate is formed. That, however, is a very
cumbersome thing to do. One can also add some excess KOH.
I like the idea though of Ag2O replacing copper salts by formation of Cu(OH)2. Ag2O indeed is slightly soluble, forming Ag(+) and OH(-) in solution.
Apparently this is sufficient to replace copper ions by silver ions.
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Even attempting to titrate to an endpoint of no free copper can be tricky. And as woelen said, simply taking the solution from dissolving silver
alloys and precipitating out the silver with a base metal is likely to encounter difficulties from leftover acid. You can use an excess of copper (or
iron or zinc or ...), but you're just dumping more cations into solution, where they may get trapped in the silver metal being built up.
The thermal decomposition, chloride precipitation, and electrorefining all separate silver from most more and less electropositive metals. The thermal
route does nothing for alkali and alkaline earth metals, so if you used sodium nitrate and sulfuric acid to dissolve you coin, the thermal method is
only useful for copper removal; the sodium has to be handled some other way.
|
|
Engager
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 295
Registered: 8-1-2006
Location: Moscow, Russia
Member Is Offline
Mood: Lagrangian
|
|
Quote: | Originally posted by woelen
Engager, what if your initial solution is still acidic. In that case not all copper will be precipitated as Cu(OH)2. When you dissolve silver/copper
alloy in HNO3, then you always need excess HNO3, otherwise not all metal dissolves.
|
Agree with that, but if you regulate pH of this solution with Ag2O produced on other step all will be fine - just take slightly larger part of sol to
threat with KOH.
Quote: | Another point is that you will never get analytical grade chemicals from a single step process. Even if the procedure works OK, you need to
recrystallize the AgNO3 in order to make it really pure. |
That's right, i think it's obvious, so i just forgot to write it. Process realy works and works well, it was taken from russian preparative chemistry
book by Karjakin and Angelov "Pure Chemical Reagents".
Quote: | Final point: Using a pre-computed amount of KOH is very tricky. KOH is very bad with respect to composition. Commercial high quality KOH may be less
than 90% pure, the rest being water. It can also be 85% pure, the rest being water, or maybe 95%. Who knows..... KOH can be very pure, except for
water content and the amount of water in it is very variable. So, yoy need to add KOH, until no more precipitate is formed. That, however, is a very
cumbersome thing to do. One can also add some excess KOH. |
KOH excess doesn't matter because KOH remains in solution, and you transfer the filtered,washed solid Ag2O+Cu(OH)2 to the rest of coin solution. Solid
Ag2O+Cu(OH)2 washed with water will contain no KOH.
[Edited on 24-8-2006 by Engager]
|
|
mert
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 80
Registered: 4-3-2006
Member Is Offline
Mood: No Mood
|
|
ok.i understand.but i have a problem. i dont have silver alloy coins what can i use
silver alloy coins instead of?where can i obtain silver alloy coins? example; can it be photograph film?or other things?
[Edited on 24-8-2006 by mert]
|
|
The_Davster
A pnictogen
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
As I said above, stores that sell coins for coin collectors.
|
|
mert
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 80
Registered: 4-3-2006
Member Is Offline
Mood: No Mood
|
|
ohhh ok..but i will produce continuous it so i dont want buy it. i must obtain cheap it. there is silver alloy in the photography films. i want to
use it or other things
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
The cheapest way to go is to buy silver bullion (as in ingots which have no numismatic value), melt them and cast them into shot/roll them to increase
surface area, and finally dissolve in 6M nitric acid. You can then evaporate the solution to dryness and heat in a porcelain evaporating dish to expel
the remaining nitric acid which will decompose at those temperatures. I have heated silver nitrate before to 'clean it up' and it does not decompose
until dull red heat. I find it is the best method for removing nitric acid from an AgNO3 solution.
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Photographic film uses pure silver; but there is so little in a bit of film that large amounts must be processed. Most if not all photoprocessing
facilities reclaim silver from the used processing materials.
You don't even need to cast ingot into shot, if you're not in a rush. Silver bullion will give you tech silver nitrate with no more processing than
drying. You'll still need to at least recrystallise for higher purity, more work if you want extreme purity. Bullion is best if you are making large
amounts, in-circulation coins for small amounts provided your country still has silver coins; sometimes you can find silver scrape from jewelers,
again might be best for small amounts but it will not be cheaper that current rates for silver and will require the processing to remove copper.
It comes down to you will be very unlikely to find a source of silver for any less than current spot prices. If you need only a bit then long searches
of second hand stores and the like may turn up overlooked silver odds and ends. Beyond that you'll need a brace of pistols and a mask.
|
|
mert
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 80
Registered: 4-3-2006
Member Is Offline
Mood: No Mood
|
|
ok i understand....a lot thanks..there arent coins in my country this is very
bad So,does silver nitrate produce from silver bullion in the world? is the
method using in the world present?
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Bulk silver or silver reclaimed from film processing (declining as digital cameras take over) and silver plating installations. Anyone who uses much
silver reclaims it from their waste stream. Bullion is the common way to transport silver, the nitrate and acetate are the other big distribution form
SFAIK, but will cost more in terms of money per gram of silver.
About the only way to get it for less than spot market prices is to expend much effort checking out second hand stores, estate sales, and similar
sources, where you will occasionally find a bit of bulk silver - jewelry, tableware, decorative stuff - that is underpriced. But you need to be rather
good it identifying something as bulk silver and not silver plate to make this route pay off.
If you live in a silver producing region, http://www.silverinstitute.org/supply/production.php, you just might be able to find a bit of ore that isn't being mined. This usually will be a
stray vein in some forsaken wilderness, any large deposits will be obviously owned. However this is a better source of a few samples of silver
minerals (read 'a few grams') than silver for production of anything.
The best way to get silver cheaply is to use your time machine; hopping back a few years to trade currency of the day for some 5 to 10 years older,
until you get to about 1960.
|
|
agent_entropy
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 91
Registered: 17-7-2006
Location: U.S.
Member Is Offline
Mood: No Mood
|
|
I was trying to think of ways to produce silver nitrate while conserving nitric acid, and this is the idea I had...
Starting with some fine (.999) silver measure out a stoichiometric excess of ammonium nitrate heat the two together in a crucible. Ammonium nitrate
should melt at 170C and boil/decompose at 210C yielding ammonia and nitric acid/nitric oxides (this is still well below silver's melting point of
961C). I'm thinking that since pure ammonia boils at -33C it will be driven off by the heat leaving behind essentially nitric acid which is then free
to attack the silver, thus producing silver nitrate. The silver nitrate will probably be molten as the reaction proceeds (AgNO3: mp = 212C) but
should not be destroyed if the heat is controlled well enough (AgNO3 boils/decomposes at 444C). So I'm thinking, one could keep the heat on until no
more ammonia is being released but stop before nitric oxides are produced by the decomposing AgNO3.
Thoughts? Improvements?
One problem I see is that it might not be only AgNO3 that is produced but also AgNO2, due to the varying nitric oxides. However, this should not be a
huge problem if the overall goal is merely to get silver oxidized and into solution.
I didn't have any silver at the time so I tried just heating some ammonium nitrate to decomposition, and tested for acid by dipping some magnesium
ribbon in the melt. Sure enough, the magnesium dissolved freeing lots of visible white fumes. Heating was continued until no more fumes were
emitted, at which point there was white crystalline material in the crucible as well as what appeared to be red fuming nitric acid (brownish red
liquid emitting fumes of the same color). Light heating was continued until the red/brown liquid was driven off and the white crystalline material
remanied. The remaining white crystals were heated strongly and emitted the same reddish brown fumes (nitric oxides) which is consistent with
magnesium nitrate (decomposes at 330C). The same procedure was followed using aluminum instead of magnesium, however, the aluminum did not appear to
be attacked at all by the melt (a puzzling observation).
I just wanted to hear your thoughts before I try this with expensive silver.
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Ammonium salts have been used in place of their parent acids, mineralogy field kits have done so to avoid having problems with leaking containers of
acid.
There is some problem with ammonium nitrate, in that nitric acid is an oxidiser and will oxidise some of the ammonia as well as the silver; remember
it's a standard method of making N2O. Given that and the potential of a runaway reaction should the temperature go much above 240 C, I'd suggest
slowly adding the ammonium nitrate to the hot container+metal until the metal has dissolved.
As silver nitrite decomposes around 140 to 150 C, it shouldn't be a problem. You will want to be careful in keeping dust out of the mix, as it both
reduces silver and can drag in other metals.
Aluminium is fairly resistent to HNO3.
You can always recover the silver, using zinc or the NaOH and sugar method garage chemist talked about. Heating silver nitrate, oxide, or carbonate to
a nice red glow will leave silver metal.
[Edited on 30-8-2006 by not_important]
|
|
agent_entropy
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 91
Registered: 17-7-2006
Location: U.S.
Member Is Offline
Mood: No Mood
|
|
Well, I tried the above method with a small chunk of silver metal (~0.65g) and it didn't seem to work very well, if at all. It did however leave a
fairly thick coating of tightly adhered tannish crud over the surface of the silver.
Seems that the nitric acid oxidizes ammonia more readily than silver. Either that or I heated too fast or too long. I'll probably try again
tomorrow; being more careful about the heating.
What about adding some HCl to the mixture? Some silver chloride might form initially, but it might help to keep the nitric acid from oxidizing the
ammonia, by forming NH4Cl; which of course decomposes readily (only to re-form from the vapor phase as a fine dust), and thus would be easily driven
off of the mixture.
|
|
Pages:
1
2 |