| Pages:
1
2 |
Romix
Hazard to Others (Literally)
Posts: 483
Registered: 19-6-2015
Member Is Offline
Mood: No Mood
|
|
Kicks when boiling solutions
Hello Dear members,
Another good question for you lot, what causing kicks when boiling some
of the solutions, some times they are that bad that beaker or flask is jumping up on a stove.
There is a way to prevent them, chuck some ceramic pieces or specially design things for it, I'm not sure how they are called in English, looked up,
can't find the translation.
Ok, the question is how to explain this phenomenon why kicking is happening while boiling the solution. And how pieces of ceramic added in is
preventing the kicks?
|
|
|
Romix
Hazard to Others (Literally)
Posts: 483
Registered: 19-6-2015
Member Is Offline
Mood: No Mood
|
|
Here's example, beaker was jumping on a stove that bad that it broke, and all my work to produce this solution spreaded around my kitchen. Also maybe
it's could be low quality glass, it's them fat walled pyrex beakers with a handle that sells cheap everywhere... Don't know, don't know been boiling
in them many times before the incident, when there were no bumping and it was fine.
[Edited on 11-4-2024 by Romix]
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
The word that you are looking for is 'bump' or 'bumping'
but ir seems that you already know the term.
https://www.sciencemadness.org/smwiki/index.php/Bumping
or https://en.wikipedia.org/wiki/Bumping_(chemistry)
[Edited on 10-4-2024 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Romix
Hazard to Others (Literally)
Posts: 483
Registered: 19-6-2015
Member Is Offline
Mood: No Mood
|
|
Yes, thank you!
|
|
|
Sir_Gawain
Hazard to Others
Posts: 457
Registered: 12-10-2022
Location: [REDACTED]
Member Is Offline
Mood: Stable
|
|
The best way to prevent bumping is good stirring. Since bumping happens when liquid near the bottom of the container is superheated above its boiling
point, stirring helps distribute the heat throughout the whole liquid and keep it at the same temperature.
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
|
Texium
Administrator
Posts: 4618
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Also, definitely don’t heat those “Pyrex” measuring cups. They aren’t actually borosilicate, and aren’t designed to be heated on a stove.
[Edited on 4-10-2024 by Texium]
|
|
|
bnull
Hazard to Others
Posts: 475
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
Quote: Originally posted by Romix  | | There is a way to prevent them, chuck some ceramic pieces or specially design things for it, I'm not sure how they are called in English, looked up,
can't find the translation. [...] And how pieces of ceramic added in is preventing the kicks? |
Boiling chips. They facilitate the formation of bubbles in the solvent (https://www.sciencemadness.org/smwiki/index.php/Boiling_chip).
Pumice stone (like those greyish bricks used by pedicures), being both porous and inert, is a good source of boiling chips. Break it in small chunks,
about the size of a rice grain or bean.
You can avoid bumping by good stirring or the use of boiling chips. The choice will depend on the setup you're using--boiling chips for a
distillation, stirring for the other cases. And, if the liquid is already bumping, do not--never-- add boiling chips to it; use a stirrer instead.
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
Sir_Gawain
Hazard to Others
Posts: 457
Registered: 12-10-2022
Location: [REDACTED]
Member Is Offline
Mood: Stable
|
|
| Quote: Originally posted by Romix |
Ok, the question is how to explain this phenomenon why kicking is happening while boiling the solution. And how pieces of ceramic added in is
preventing the kicks? |
Bumping happens when liquid near the bottom of the container is heated above its boiling point, but can’t boil because there is no nucleation sites
for bubbles to form on. Broken pieces of ceramic or glass provide places for bubbles to form.
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
|
fx-991ex
Hazard to Self
Posts: 99
Registered: 20-5-2023
Member Is Offline
|
|
It happen when heating liquid without stirring or without nucleation site.
| Quote: Originally posted by bnull | | Quote: Originally posted by Romix | | There is a way to prevent them, chuck some ceramic pieces or specially design things for it, I'm not sure how they are called in English, looked up,
can't find the translation. [...] And how pieces of ceramic added in is preventing the kicks? |
Boiling chips. They facilitate the formation of bubbles in the solvent (https://www.sciencemadness.org/smwiki/index.php/Boiling_chip).
Pumice stone (like those greyish bricks used by pedicures), being both porous and inert, is a good source of boiling chips. Break it in small chunks,
about the size of a rice grain or bean.
You can avoid bumping by good stirring or the use of boiling chips. The choice will depend on the setup you're using--boiling chips for a
distillation, stirring for the other cases. And, if the liquid is already bumping, do not--never-- add boiling chips to it; use a stirrer instead.
|
Sometime just having a stir bar in there without actually stirring fix the issue(nucleation site). ceramic piece like he said is hard on the
glassware.
[Edited on 10-4-2024 by fx-991ex]
[Edited on 10-4-2024 by fx-991ex]
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Again, those measuring cups are not meant for direct heat. In addition to boiling chips and stirring you can also sparge gas through the liquid using
a capillary tube. If it's non-flammable you can bubble air but to prevent a disaster I'd recommend an inert gas if you're trying to rip off solvent.
|
|
|
Texium
|
Thread Moved
10-4-2024 at 14:43 |
B(a)P
International Hazard
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
The good news is that you can use a few of the smaller pieces of your broken jug as boiling chips once you buy yourself some appropriate reaction
vessels.
What was it that got spread all over your cooktop and kitchen when the glass measuring jug broke?
|
|
|
Precipitates
Hazard to Others
Posts: 136
Registered: 4-12-2023
Location: SE Asia
Member Is Offline
Mood: Acid hungry
|
|
Pretty bad if pyrex isn't borosilicate as advertised everywhere as this.
I've heated solutions in pyrex jugs for many years and never had any problems.
I've found them to have less bumping than typical beakers, so have preferred them at times for voluminous solutions that I need to boil for a long
time - but, with that being said, I never use them for boiling expensive reagents or those that have been hard to synthesise, in case of dramatic
failure.
If extreme bumping occurs, boiling chips definitely need to be used, or, the solution needs to be gently heated (without boiling). If the beaker is
jumping around the stove it will break, doubtless regardless of the material.
Edit: On further reading it depends if its pyrex (soda-lime) or PYREX (borosilicate)
Will have to check mine when I get home! 
[Edited on 11-4-2024 by Precipitates]
|
|
|
Sir_Gawain
Hazard to Others
Posts: 457
Registered: 12-10-2022
Location: [REDACTED]
Member Is Offline
Mood: Stable
|
|
Pyrex used to be borosilicate; they recently changed to cheaper soda-lime glass.
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
|
Texium
Administrator
Posts: 4618
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Pyrex branded lab glass is still excellent quality borosilicate. The brand was originally produced only by Corning and was synonymous with
borosilicate, but at some point they spun off the kitchenware side of the business, and now Corning only produces Pyrex lab glass and the kitchenware
is made by an entirely separate company, confusingly using the same brand name.
|
|
|
Precipitates
Hazard to Others
Posts: 136
Registered: 4-12-2023
Location: SE Asia
Member Is Offline
Mood: Acid hungry
|
|
Yeah that is really confusing! A big difference in quality depending on whether its pyrex or PYREX.
And I'm sure there are lots of people paying more for pyrex, because they think it's a premium product.
|
|
|
Romix
Hazard to Others (Literally)
Posts: 483
Registered: 19-6-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by B(a)P | The good news is that you can use a few of the smaller pieces of your broken jug as boiling chips once you buy yourself some appropriate reaction
vessels.
What was it that got spread all over your cooktop and kitchen when the glass measuring jug broke? |
Water soluble Potassium compounds out of plant ash after the incineration of salt with MAPP+ to make it colorless. Took me many BBQs to collect all
the ash used...
|
|
|
Romix
Hazard to Others (Literally)
Posts: 483
Registered: 19-6-2015
Member Is Offline
Mood: No Mood
|
|
Now I'm evaporating the water off of the salt in the same stainless steel crucible that I've incinerated it in after filtering off all decomposition
products. No risk of breaking.
|
|
|
dettoo456
Hazard to Others
Posts: 249
Registered: 12-9-2021
Member Is Offline
|
|
You should have something unreactive in your process vessel in almost any scenario anyways, even if it doesn’t require agitation. Steel won’t fail
catastrophically due to thermal shock but boiling liquids in it can still superheat if no nucleation point is made. It’s like boiling water in a
clean bowl in a microwave, if there’s no nucleation point in the bowl but the water gets super hot, it’ll instantly flash-boil when even slightly
agitated.
I’d either make a good, deep scratch in the steel vessel (less advisable) of just lean a stir rod into it; it could be glass or metal or something
generally inert to heat and chemical media.
[Edited on 11-4-2024 by dettoo456]
|
|
|
Morgan
International Hazard
Posts: 1705
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
I recently got a new borosilicate carafe and PYREX measuring cup in the mail as a gift. Funny though the pint markings are imperial ounces so that
it's more than a U.S. pint.
Here's a company that sells PYREX cups.
https://www.pyrexae.com/products/classic-glass-measure-jug-h...
|
|
|
Rainwater
National Hazard
Posts: 937
Registered: 22-12-2021
Member Is Offline
Mood: Break'n glass & kick'n a's
|
|
If you dont want to use boiling chips, attacking the inside bottom of your boiling vessel with sand paper and making deep scratches will help, its
ugly, but cheap, effective and works on more than just glass tho tuffer to clean/collect product from.
"You can't do that" - challenge accepted
|
|
|
Precipitates
Hazard to Others
Posts: 136
Registered: 4-12-2023
Location: SE Asia
Member Is Offline
Mood: Acid hungry
|
|
I second (or third?) that. Part of the reason my PYREX jugs don't really bump is probably because they are getting old, and are heavily scratched now.
Yeah looks horrible compared to a nice shiny new jug, but seems to do the trick.
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Bumping can be pretty violent sometimes,
but I don't think that was the main cause of failure.
I suspect that thermal stresses were the primary problem.
Try using a shallow pan with less than an inch deep sand,
Heating up and cooling down will be much slower,
Boring, but better for the glass.
PS If there is a future breakage the pan can hold the spilled liquid.
Also,
If you have a small air pump, (eg aquarium type)
bubbling air via a small/capillary opening (to give a continuous stream of tiny bubbles)
helps to prevent bumping and gives some mixing.
Not suitable if atmospheric oxygen, moisture or carbon dioxide would interfere with the experiment.
and
I found that using boiling chips for a second run is not very effective unless the chips are dried between batches.
May just be an anomaly that I had, but it makes sense, so probably worth doing.
Not least - I don't like scratching my glassware.
[Edited on 13-4-2024 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
bnull
Hazard to Others
Posts: 475
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
| Quote: Originally posted by Sulaiman | I found that using boiling chips for a second run is not very effective unless the chips are dried between batches.
May just be an anomaly that I had, but it makes sense, so probably worth doing. |
"Boiling chips cannot be re-used since the pores inside these stones become filled with liquid on cooling."[1] Honestly, it's more like
"should not" than "cannot". Unless you're boiling something that generates tar as the procedure nears the end or you want to reuse them in other
different procedures, letting the chips rest overnight under a bit of the same solvent, drying and heating them to drive off the liquid rejuvenates
them. You're right, it makes sense.
By the way, what kind of chips do you use? Store bought or homemade? (Edit: Nevermind.)
Are you still using stones from the garden?
[1] https://orgchemboulder.com/Technique/Procedures/Distillation...
[Edited on 13-4-2024 by bnull]
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Yes, and for sulphuric acid distillation I used some of those stones,
the ones that tested inert to cold sulphuric acid.
I noticed no obvious loss of mass after distillations.
It was those stones that failed during a second distillation.
Scared the cr@p out of me!
(no harm done but I imagined what could have happened - terrifying really)
Nevertheless, I have another H2SO4 distillation planned for 'quite soon'
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
bnull
Hazard to Others
Posts: 475
Registered: 15-1-2024
Location: South of the border, wherever the border is.
Member Is Offline
Mood: Fighting the banking system and international commerce. Still losing.
|
|
Have you ever tried sand? Fine silica sand, after a digestion with hot concentrated acid to remove attackable impurities, should work well.
Edit: Vogel's take on superheating, bumping, and boiling chips is attached.
Attachment: Vogel's - Superheating and bumping.pdf (555kB)
This file has been downloaded 198 times
[Edited on 14-4-2024 by bnull]
Quod scripsi, scripsi.
B. N. Ull
P.S.: Did you know that we have a Library?
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
