Eithern
Harmless
Posts: 3
Registered: 1-11-2023
Member Is Offline
Mood: No Mood
|
|
Recovery of silver, mercury and chromium from acid mixture
Hello, I'm new here I work in a small environmental analysis laboratory and I
like to do some experiments in the free time.
For the determination of COD we use a kit that contains H2SO4, silver and mercury sulfate (as catalyst and for removing chloride respectively) and
potassium dichromate as oxidizing agent.
Until some months ago we simply disposed of the reacted material, but now I want to recover these 3 metals, because silver is precious, mercury is
hard to obtain, and chromium... well it's there.
The problem is the solution is quite complex and I don't know for sure which species are present. I start by reducing the unreacted chromium with
citric acid, than I slowly add NaCl to precipitate silver chloride that is removed by filtration. But after this? Adding NaOH a brown precipitate is
formed, and with NaBH4 I see a not recognized grey powder.
I managed to produce some metallic mercury by collecting the undissolved crystals on the bottom of the reaction cells, washing them with a bit of
water to remove the acid (there's a transition from white to yellow, and i found this information"decomposed in H2O to yellow insoluble basic sulfate
and H2SO4") and then using NaBH4. But this is not feasible on large scale.
I even tried putting a piece of iron and copper but no mercury was formed, although the copper was covered by a grey substance.
Any idea for a selective separation? I've thioacetamide but maybe the chromium forms insoluble sulfides too? Plus I prefer to obtain mercury in the
metallic form directly. Thanks in advance.
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
I would go like this:
1. Precipitate Ag as AgCl
2. Precipitate Hg as HgS
3. Reduce Cr(VI) to Cr(III) and precipitate it with Na2CO3 as Cr(OH)3 (don't use NaOH or NH3, Cr(OH)3 is soluble in excess of the reagent)
AgCl and HgS both precipitate from acidic solutions. Cr3+ doesn't react with sulfide in acidic solution, it reacts with sulfide only in alkaline
solution to form Cr(OH)3 (Cr2S3 hydrolyze in the water, the same is also true for Al2S3).
All of these compounds can be easily converted to useful soluble salts.
[Edited on 10-11-2023 by Bedlasky]
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
If you have enough sulphide to ppt the Hg then you have already reduced Cr(VI) to Cr(III)
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Cr6+ precipitates with barium
|
|
Sir_Gawain
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 324
Registered: 12-10-2022
Location: Due South of Due West
Member Is Offline
Mood: Way less sad
|
|
Won’t the mercury precipitate with the silver as mercury (I) chloride?
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 867
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I would use a test tube
add copper foil, slowly and in small amounts until no more disolved
Should form an almagium on the bottom of the tube of Hg and Ag
Decant the liquid, Distill the Hg almagium (375c).
Then use nitric acid to bring everything back into solution
Percipitate the silver as AgCl with HCl
Dont know what to do with the chromium.
"You can't do that" - challenge accepted
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
There is also sulfate present. So you get mix BaSO4 and BaCrO4.
No offense, but why would you recover mercury by distillation when there are plenty of safer ways?
In these kits is used mercury(II) sulfate, so you can't precipitate it with chloride.
[Edited on 11-11-2023 by Bedlasky]
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 867
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Quote: |
No offense, but why would you recover mercury by distillation when there are plenty of safer ways?
|
High yields, No additional chemicals, Only method I know.
I use a steal pipe, with taped cap, insert some copper tubing as a condencer and boil away.
Mercury is a cheap and easy way to extract silver, gold and a lot of other stuff
A bunch of hillbillies dumping and polluting gave it a bad name.
[Edited on 11-11-2023 by Rainwater]
"You can't do that" - challenge accepted
|
|
Eithern
Harmless
Posts: 3
Registered: 1-11-2023
Member Is Offline
Mood: No Mood
|
|
Hi guys, thanks for your replies!
Quote: Originally posted by Bedlasky ![](images/xpblue/lastpost.gif) | I would go like this:
1. Precipitate Ag as AgCl
2. Precipitate Hg as HgS
3. Reduce Cr(VI) to Cr(III) and precipitate it with Na2CO3 as Cr(OH)3 (don't use NaOH or NH3, Cr(OH)3 is soluble in excess of the reagent)
AgCl and HgS both precipitate from acidic solutions. Cr3+ doesn't react with sulfide in acidic solution, it reacts with sulfide only in alkaline
solution to form Cr(OH)3 (Cr2S3 hydrolyze in the water, the same is also true for Al2S3).
All of these compounds can be easily converted to useful soluble salts. |
In regard of point 3, since I should add a lot of sodium carbonate to neutralize the acid, is it possible that sodium sulfate also form and
co-precipitate?
Also, I don't know an easy method to convert HgS to metallic mercury other then roasting it.
Quote: Originally posted by Rainwater ![](images/xpblue/lastpost.gif) | I would use a test tube
add copper foil, slowly and in small amounts until no more disolved
Should form an almagium on the bottom of the tube of Hg and Ag
Decant the liquid, Distill the Hg almagium (375c).
|
I tried with iron and copper but without succes, or at least I didn't see any amalgam (the "iron" that maybe contained other metals formed a strange
semi-solid matrix, the copper instead was simply covered by a grey film).
I can try your suggestion in some test tubes ![;)](./images/smilies/wink.gif)
But one thing... since I accumulated at least 4-5 litres of solution, I thought of reducing the volume by putting some of it in a crystallization dish
on light heat. At some point there were little white crystals both on bottom and floating on the surface, and a faint white patina formed on the glass
borders of the dish (like when you use concentrated HCl).
Well, could it have been HgCl2? I've read contradictory things and don't know if the mercury sulfate only complex the chloride ions or form mercury
chloride instead, I hope not because it would be a problem.
The crystals on the bottom, washed and reduced with NaBH4, formed a grey powdery precipitate, but I thought all chromium salts are colored. Boh?
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Quote: Originally posted by Eithern ![](images/xpblue/lastpost.gif) | Hi guys, thanks for your replies!
Quote: Originally posted by Bedlasky ![](images/xpblue/lastpost.gif) | I would go like this:
1. Precipitate Ag as AgCl
2. Precipitate Hg as HgS
3. Reduce Cr(VI) to Cr(III) and precipitate it with Na2CO3 as Cr(OH)3 (don't use NaOH or NH3, Cr(OH)3 is soluble in excess of the reagent)
AgCl and HgS both precipitate from acidic solutions. Cr3+ doesn't react with sulfide in acidic solution, it reacts with sulfide only in alkaline
solution to form Cr(OH)3 (Cr2S3 hydrolyze in the water, the same is also true for Al2S3).
All of these compounds can be easily converted to useful soluble salts. |
In regard of point 3, since I should add a lot of sodium carbonate to neutralize the acid, is it possible that sodium sulfate also form and
co-precipitate?
Also, I don't know an easy method to convert HgS to metallic mercury other then roasting it. |
Sodium sulfate is soluble, so it doesn't coprecipitate (if you have enough water).
HgS can be converted to HgCl2 by treating with concentrated HCl. This is pretty useful salt for mercury chemistry. But if you want to specifically
elemental mercury, you can reduce it with some strong reducing agent like SnCl2 (you must add it in excess, otherwise you get mix of Hg + Hg2Cl2).
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 867
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Quote: | I tried with iron and copper but without succes, or at least I didn't see any amalgam (the "iron" that maybe contained other metals formed a strange
semi-solid matrix, the copper instead was simply covered by a grey film). |
Depending on the consentration, it will look different.
Thats a positive result for everything below copper in the reactivity series.
"You can't do that" - challenge accepted
|
|
RU_KLO
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 177
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
first I would try to do an analytical scheme, to confirm which metals are in your solution.
First, using ammonia (if acidic solution) take the solution to ph 7-9 (neutral - slighty basic)
Then proceed with group reagents. you could find a lot of information on the web, wiki or here is the most complete I ve found so far (just change H2S
for thioacetamide)
Attachment: 4.1_MIS_and_NJS_Manual_for_Inorganic_semi-micro_qualitative_analysis.pdf (395kB) This file has been downloaded 253 times
Go SAFE, because stupidity and bad Luck exist.
|
|
RU_KLO
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 177
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
from reading, you could use aqua reggia to dissolve HgS.
"In dissolving HgS, aqua regia acts as an oxidising agent and also complexing agent. The NO3- ions in presence of hydronium ion oxidize the
S2- ions to free sulphur and the Cl- ions with Hg2+ ions from soluble complex-ion, HgCl4 2-
3HgS + 2NO3- +8H3O+ + 12Cl- → 3HgCl4(2-) + 2 NO +3S +12H2O
(filter the sulfur - very difficult)
then
Mercuric chloride is converted into mercury by:
A. placing copper metal in aqueous solution of HgCl2.
B. treating aqueous solution of HgCl2 with excess of stannous chloride.
C. treating aqueous solution of HgCl2 with PbCl4 solution.
(note: I dont know how to convert HgCl4(2-) ion to HgCl2...)
Of course fumehood or outside and proper protection equipment.
Go SAFE, because stupidity and bad Luck exist.
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 867
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Quote: | But one thing... since I accumulated at least 4-5 litres of solution |
After you find a small scale experments that works, you can scale up to bucket size and process everything at once.
For simple disposal i would skip copper and go stright to iron.
The test strips I use can be found here.
https://www.amazon.com/dp/B08NVRSTHV/
If no trace of heavy metals can be detected, then you know the procedure works and can scale up.
I have found that these test strips are inaccurate at ph below 5
Once your solution test negitave for copper, mercury, and chromium and are netural ph
Their safe to pour down the drain
My standard waste treatment is using copper, then iron to remove the elements according to the reactivity series.
To recover metals/salts you can try the following
A solution with a ph below 7 is desirable
A few drops of hcl may need to be added
Dont be considered if AgCl percipitates, only be concerned with ph
1) Use copper metal as described above, and let the reaction run for an extended amount of time (hours to days).
Bubbling air into the mix helps but is not required.
2) Decant the liquid and save for step 9
If you test your solution here, you should see only copper and chromium.
Now your left with very little liquid some metal fragments and sludge.
3) If you know there is mercury, distillation of the metel pieces and sludges will remove it.
Distill until dry. (375c iir)
If AgCl percipitated, it will now be AgO (no white powder, will be black)
Distillate will contane water, hg, hcl
4) The copper pieces and sludge are then treated with consentrated nitric acid
25-65% will work.
Do not use RFNA. Dilute it first.
Add in small amounts until everything is disolved. Try not to add too much.
5) Filter. Carbon, gold, and some pgm will be trapped in the filter.
If they are present. You can skip this step
6) Then, to your filtrate, add a small amount of consentrated sulfuric acid (3-4 drops, or until percipitate stops)
Filter, this will remove any lead. Probley doesn't apply to what you're doing.
7) Then add small amounts of NaCl saturated solution into your filtrate until no more white percipitate forms.
Try not to overshoot.
8) Filter off the AgCl percipitate. Rinse with water until perfectly white, do not expose to uv light, or it will decompose and turn gray
9) Take the liquids from step 2 and step 8 and raise the ph
to about 6 to 7 with NaOH or bicarbonate (foams a lot)
The solution will heat up and can boil, so add it slowly.
10) Let it sit on iron/steel for a day. Do not use stainless steel.
This will percipitate/cement out the copper you added earlier.
I dont know what state this will percipitate the chromium, but it come out with the copper.
11) decant the liquid and test for heavy metals.
If heavy metals are still present, adjust the ph down and let it sit on the iron longer.
Edit: corrected ph in step 9
[Edited on 15-11-2023 by Rainwater]
"You can't do that" - challenge accepted
|
|