BlackPowderBoy
Harmless
Posts: 17
Registered: 26-10-2022
Member Is Offline
Mood: Music
|
|
Any reaction between AL and ETN?
Are there any adverse reactions between Aluminum and ETN? Except for sensitizing the ETN (which is what I want.) To give context, I need to make a
detonator completely made out of ETN and before you say it's pointless, I know it has been tried and tried again. ETN detonators barely ever work. I'm
honestly just hoping that my research proves futile and there are methods of making a RELIABLE ETN detonator that I haven't found yet. I recently came
across a diagram that I may have found on here, tbh I forgot. It Illustrates the mixing of 100mg ETN + 5% Aluminum powder, folding in foil, and then
wrapping that foil around three sets of fuses that are in touching proximity. (I know it sounds janky but stay with me) according to the photo, it
works "10/10" times (I'll leave a pic in this post) and I'm wondering if that sounds like it would even work. Or even be reliable. This is probably my
last go at a reliable yet easy to make detonator before I just try and buy a whole distillation set and fume hood. Which would of course propel my
research into more advanced energetics and acids. But that's why I'm posting this is because I don't have the space for a distillation set, fume hood,
etc, blah blah unrelated. Thanks ![:)](./images/smilies/smile.gif)
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
http://www.sciencemadness.org/talk/viewthread.php?tid=13502
Have you read this thread?
Edit
It seems you have, that is likely where you found that image.
[Edited on 27-10-2022 by B(a)P]
|
|
Sir_Gawain
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 324
Registered: 12-10-2022
Location: Due South of Due West
Member Is Offline
Mood: Way less sad
|
|
I've done many experiments with ETN detonators and found copper based thermite works fairly well with good confinement. Recently I've been testing a
oxygen balanced mixture of ETN and nitroguanidine. When ignited, it burns rapidly and completely. I think this composition would undergo DDT better
than just ETN.
However, none of these DDT detonators have come even close to the simple EBW detonators system I built. It uses a microwave oven capacitor and works
every time.
“Alchemy is trying to turn things yellow; chemistry is trying to avoid things turning yellow.” -Tom deP.
|
|
Texium
|
Thread Moved 27-10-2022 at 06:48 |
BlackPowderBoy
Harmless
Posts: 17
Registered: 26-10-2022
Member Is Offline
Mood: Music
|
|
Yes! I couldn't find the exact thread again so thank you. I'm about to actually attempt to use the method depicted in the photo. Hopefully it's not
total shite.
|
|
Laboratory of Liptakov
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1367
Registered: 2-9-2014
Location: Technion Haifa
Member Is Offline
Mood: old jew
|
|
The method burning - boiling ETN on alu foil can works pretty reliable. But exact time of start is in stars.....
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
DocX
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 179
Registered: 22-10-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by BlackPowderBoy ![](images/xpblue/lastpost.gif) | To give context, I need to make a detonator completely made out of ETN and before you say it's pointless, I know it has been tried and tried again.
ETN detonators barely ever work. |
Really? Why don't they work? PETN detonators is definitely a thing, why wouldn't ETN detonators work?
|
|
BlackPowderBoy
Harmless
Posts: 17
Registered: 26-10-2022
Member Is Offline
Mood: Music
|
|
Quote: Originally posted by DocX ![](images/xpblue/lastpost.gif) | Quote: Originally posted by BlackPowderBoy ![](images/xpblue/lastpost.gif) | To give context, I need to make a detonator completely made out of ETN and before you say it's pointless, I know it has been tried and tried again.
ETN detonators barely ever work. |
Really? Why don't they work? PETN detonators is definitely a thing, why wouldn't ETN detonators work? |
I could be wrong but from the research I've done, most PETN detonators are made with an EBW. An EBW detonator would for sure detonate PETN and both
ETN. As someone earlier in this post was saying that he made EBW detonators that work 100% of the time on ETN. The problem with this is that i'm
trying to make a "fuse only" det for this which requires the ETN to undergo DDT. ETN is notoriously stubborn when it comes to DDT. sometimes it works,
sometimes it doesn't unless of course you get the design very compact and practically perfect. Even then it's kind of a 50/50 chance. That's why I'm
experimenting with different sensitizers like Aluminum. PETN could transition to detonation easier, that could be another reason PETN detonators are
easier but I'm not sure though.
[Edited on 29-10-2022 by BlackPowderBoy]
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
Does it have to be an NPED (no primary explosive detonator)? The classical method of making detonators is by using a small amount of primary explosive
to initiate the secondary (the base charge). Of course, some primaries are quite sensitive, but it is entirely possible to make one that is less
sensitive than ETN.
|
|
Laboratory of Liptakov
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1367
Registered: 2-9-2014
Location: Technion Haifa
Member Is Offline
Mood: old jew
|
|
It is very difficult to construct in amateur practice NPED (reliable NPED) only on the basis of ETN and electrotechnical parts (e.g. EBW). Unlike
primary-secondary substance synthesis.
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Microtek ![](images/xpblue/lastpost.gif) | Does it have to be an NPED (no primary explosive detonator)? The classical method of making detonators is by using a small amount of primary explosive
to initiate the secondary (the base charge). Of course, some primaries are quite sensitive, but it is entirely possible to make one that is less
sensitive than ETN. |
Which primary would that be?
|
|
BlackPowderBoy
Harmless
Posts: 17
Registered: 26-10-2022
Member Is Offline
Mood: Music
|
|
Quote: Originally posted by Microtek ![](images/xpblue/lastpost.gif) | Does it have to be an NPED (no primary explosive detonator)? The classical method of making detonators is by using a small amount of primary explosive
to initiate the secondary (the base charge). Of course, some primaries are quite sensitive, but it is entirely possible to make one that is less
sensitive than ETN. |
I have been trying to make reliable NPED's (to no avail of course.) But if I were to make a primary, what would be the best one that isn't a peroxide?
In your opinion.
[Edited on 3-11-2022 by BlackPowderBoy]
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
Ha! You have opened a can of worms there!
Have you seen this thread?
https://www.sciencemadness.org/whisper/viewthread.php?tid=9984
Or this one?
http://www.sciencemadness.org/talk/viewthread.php?tid=146585
It somewhat depends on what you have available to you. I am not sure many people would claim a peroxide to be the 'best primary'.
|
|
BlackPowderBoy
Harmless
Posts: 17
Registered: 26-10-2022
Member Is Offline
Mood: Music
|
|
I have seen the second one, haven't seen the first one. That one is of use, thank you. Also ya I wouldn't consider a peroxide a "best primary." or
really a "best anything" tbh. I'm just curious what primaries are out there that are actually stable and not too dangerous to handle. ![:P](./images/smilies/tongue.gif)
[Edited on 3-11-2022 by BlackPowderBoy]
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
In terms of stability and (comparatively) less dangerous to handle primaries you should check out Laboratory of Liptakov's work if you have not done
so already. He has done some amazing work with hexamine/perchlorate compounds.
This would be the most relevant thread.
http://www.sciencemadness.org/talk/viewthread.php?tid=158259
Personally, my area of interest is tetrazoles. As versatile as they are you can essentially tailor a compound to meet your needs.
I am currently experimenting with tetrazoleazasydnone and its salts to explore their energetic properties.
|
|
Hey Buddy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 392
Registered: 3-11-2020
Location: Bushwhacker Country
Member Is Offline
|
|
FYI, was just doing some number crunching on metal/oxidizers. For ETN and Al, in terms of CHO content and products after detonation, max energy should
be available from 906.32 : 53.96 mass ratio which is weight percentage ratio:
ETN 94.4% / Al 5.6%
|
|
ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 885
Registered: 19-5-2019
Member Is Offline
|
|
I have a question about ETN and aluminum. Are they reactive in any way? I might want to melt-cast some ETN in an aluminum tube, will there be any
danger of detonation if I heat up the ETN to 65-70C while it is in an aluminum tube?
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by ManyInterests ![](images/xpblue/lastpost.gif) | I have a question about ETN and aluminum. Are they reactive in any way? I might want to melt-cast some ETN in an aluminum tube, will there be any
danger of detonation if I heat up the ETN to 65-70C while it is in an aluminum tube? |
Many people have done that without reporting any problem using boiling water.
Just look at the pictures from the other topic. Copper is ok too.
Also, see Hey Buddy's last post right here. You can mix Al powder, ETN and melt cast it. In all cases, I dont recommend handling the molten ETN. Just
put everything in your container and submerge in boiling water. Add water as needed if you are dealing with a big quantity. Do not put the thing on a
stove. Boil the water separately.
I have curiosity with ETN + Al, Mg, Zr and would love to see the difference not only in output but recorded in slow motion.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
Hey Buddy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 392
Registered: 3-11-2020
Location: Bushwhacker Country
Member Is Offline
|
|
Testing with ETN/PTFE/Al today. PTFE seems like a nice addition for pressing and fast fuel. Mix was ETN 81.5% PTFE 13.5% Al 5%. Mixed through mesh
sieve. Behaves very similar to ETN and exhibits same Al Foil detonation effect but it seems to detonate a little sooner or with lower thermal energy.
Still deflagrates under flame if not in contact w/ Al foil just like plain ETN. Im wondering if Al2O3 is what is interacting as a detonation catalyst
such that flame oxidizes inner surface of foil, possibly releasing hot oxide gas which then somehow encourages detonation.
Maybe an Al Oxide ETN Mix experiment is called for.
I think the Al foil interaction with ETN is so universal, repeatable and unusual that it really is something that should be understood. I think this
challenge is key to unlocking reliable DDT ETN Pyrotechnic comps.
Also attempted to DDT ETN and ETN/PTFE/Al using TiH2/KCLO4 ignitor compositions. Tests in 8mm OD SS bodies were not successful. Order of load was
fuze>Pyrodex>TiH2/KCLO4>ETN or ETN/PTFE/Al. All tests were unsuccessful. Ti ignitor mixes are wicked.
Of Ignitor compositions: 68%/33% TiH2/KCLO4 was most impressive and fast. A version using TiH2/Si/KCLO4 was sluggish and made a lot of slag and
seemed even less intense which was contrary to expectation.
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Hey Buddy ![](images/xpblue/lastpost.gif) | Testing with ETN/PTFE/Al today. PTFE seems like a nice addition for pressing and fast fuel. Mix was ETN 81.5% PTFE 13.5% Al 5%. Mixed through mesh
sieve. Behaves very similar to ETN and exhibits same Al Foil detonation effect but it seems to detonate a little sooner or with lower thermal energy.
Still deflagrates under flame if not in contact w/ Al foil just like plain ETN. Im wondering if Al2O3 is what is interacting as a detonation catalyst
such that flame oxidizes inner surface of foil, possibly releasing hot oxide gas which then somehow encourages detonation.
Maybe an Al Oxide ETN Mix experiment is called for.
I think the Al foil interaction with ETN is so universal, repeatable and unusual that it really is something that should be understood. I think this
challenge is key to unlocking reliable DDT ETN Pyrotechnic comps.
Also attempted to DDT ETN and ETN/PTFE/Al using TiH2/KCLO4 ignitor compositions. Tests in 8mm OD SS bodies were not successful. Order of load was
fuze>Pyrodex>TiH2/KCLO4>ETN or ETN/PTFE/Al. All tests were unsuccessful. Ti ignitor mixes are wicked.
Of Ignitor compositions: 68%/33% TiH2/KCLO4 was most impressive and fast. A version using TiH2/Si/KCLO4 was sluggish and made a lot of slag and
seemed even less intense which was contrary to expectation. |
Mg works better than Al for ETN. But using Al, you probably need 10 percent, but keep PTFE at same percentage. I would also consider adding copper
oxide or hexamine, which both greatly encourage DDT. This should work, and if it does not, a 100mg of flash powder on the top of the tube should make
it work. The issue being these mixes will approach the sensitivity
of primaries. I posted earlier several years ago about an ETN, PP and Mg mix. Sodium hypophosphite could also greatly increase DDT. The conclusion
that I think many came to however, is that it’s far simpler to use CHP. Of course. A mixture that DDT without grain size and pressing would be fire.
With a strong tube, PTFE, copper oxide, and Al I see that possible.
|
|