Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Separating Iridium from Gold
I recently stumbled upon this video about a guy melting gold with a high % of iridium:
https://youtu.be/UgP_UqXUnsc
I'm surprised that iridium is a problem to him but most surprised it's a problem for his refinery !!
This makes little sense to me as iridium a more expensive than gold.
Any opinion on that ? Would separating iridium would be such a complicated endeavour for a refiner that they see iridium as a problem ?
Sure, you cant aqua regia the whole thing.
I dont see how inquartering would help either (though that might be a step in the right direction).
The guy is pretty well equipped (XRF) so I can only assume he knows a thing or two.
What am I missing ?
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Yes, I agree strange, as Iridium melts at 2,446°C, 4,435°F (see https://www.rsc.org/periodic-table/element/77/iridium) but Gold at 1,064°C, 1,948°F.
Also, per this source https://www.sciencedirect.com/topics/earth-and-planetary-sci... :
"derived from small celestial bodies, are composed mostly of iron, nickel, gallium, germanium, and iridium (Fig. 1.3). The impact of falling on the
Earth’s crust causes partial melting and concentration of valuable metals."
Iridium may be a problem in the sense it is harder for his refinery to melt/cast.
Also, if your sample contains highly radioactive Iridium 192 (which emits gamma rays and has a half-life of 74 days that is relatively short) for a
plant manager that can be a problem (should be subject to reporting to AEC, plant closing and associated clean-up).
[Edited on 3-2-2022 by AJKOER]
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
If that was really iridium, and I knew the guy, I'd offer to swap him that mixture for for its weight in pure gold.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Unionised:
You may wish, per my revised comment, bring your radiation detector.
If measurable amounts of Iridium 192, an actuary could calculate related storage cost and clean-up along with potential personal future health cost
for yourself/others as well a legal fees for any claimed damages, etc., all combined and appropriately discounted to its present value, which would
compared to the current price of gold.
I may have missed some issues, see this Time story here http://content.time.com/time/subscriber/article/0,33009,8676... and of course those pleasant conversations you'll have with the Atomic Energy
Commission.
Still interested in the gold swap?
[Edited on 3-2-2022 by AJKOER]
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
I can't speak for unionised, but for me: any day.
|
|
SWIM
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
Yes, the iridium may be iridium 192!
And what if the gold is gold 198!!!!!
I have also decided to stop bathing because the water I use might be trituim oxide!!!
*puts fluorodeoxyglucose F18 in my coffee*
|
|
Metallophile
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 82
Registered: 23-3-2018
Member Is Offline
Mood: No Mood
|
|
Why would it contain Ir192, with a half-life of 74 days? It does seem like separation would be worthwhile though, given the value of iridium. Could
this be done chemically? It also contained Ag, Pb, and Fe, according to his XRF.
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by unionised ![](images/xpblue/lastpost.gif) | If that was really iridium, and I knew the guy, I'd offer to swap him that mixture for for its weight in pure gold.
|
XRF says 4% Ir and 4% Ag.
I'd do the swap too !
But I look at foundry slag as treasure, so I might be a little biased ![:)](./images/smilies/smile.gif)
Actual extraction costs might negate any profits for me but it would be a fun project.
And Iridium is missing in my element collection !
"Glencore": Anodes are 92% pure copper
"Me": What's in the remaining 8%?
Quote: Originally posted by Metallophile ![](images/xpblue/lastpost.gif) | It does seem like separation would be worthwhile though, given the value of iridium. Could this be done chemically? It also contained Ag, Pb, and Fe,
according to his XRF.
|
That's my question ![:)](./images/smilies/smile.gif)
His sample is 243 grams at the beginning and 200 grams after melt.
That's still about 8g Ir but I wonder what was really in the 40 grams he lost.
[Edited on 5-2-2022 by Herr Haber]
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 869
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
To dissolve, iridium takes some very nasty stuff.
When i suspect a sample, I use an oxy acetylene torch and add 5 times the sample mass in copper or 3 times the mass with silver
Incort the sample which is at the very limits of my torch. Turn it into beads then soak in nitric.
Decant and repeat until no orange NO2 is produced.
Then a hot aqua regia bath until no orange gas again.
The left overs are probley iridium. Ive only came across it a few times. Could be a better way.
As for the melting step. I find copper to be better. I think the alloy formed has a lower melting point than with silver. But i try to use at least a
4:1 mol ratio so no other metals get trapped
"You can't do that" - challenge accepted
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Silly me !
Yes Rainwater, thank you So not only inquartering (spelling?) is a good approach
it's probably the best if not the only.
(Guess who forgot Ir doesnt dissolve in AR...)
Can you confirm what he says about the smell ?
I've come accross weird smells while working with metals so I'm willing to believe anything.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 869
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I never noticed any smells from pure metals melts. I must add that I do my smelting with lots of ventilation and outside. Ores, though, will stink up
the neighborhood
[Edited on 5-2-2022 by Rainwater]
"You can't do that" - challenge accepted
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AJKOER ![](images/xpblue/lastpost.gif) | Unionised:
You may wish, per my revised comment, bring your radiation detector.
If measurable amounts of Iridium 192, an actuary could calculate related storage cost and clean-up along with potential personal future health cost
for yourself/others as well a legal fees for any claimed damages, etc., all combined and appropriately discounted to its present value, which would
compared to the current price of gold.
I may have missed some issues, see this Time story here http://content.time.com/time/subscriber/article/0,33009,8676... and of course those pleasant conversations you'll have with the Atomic Energy
Commission.
Still interested in the gold swap?
[Edited on 3-2-2022 by AJKOER] |
I think someone may have hacked AJKOER's account. There's no mention in that post of free radicals.
I'm also concerned that he didn't mention the potential danger of having a sample delivered by a rabid dog (which is more likely that significant
radioisotope contamination).
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Herr Haber ![](images/xpblue/lastpost.gif) |
Can you confirm what he says about the smell ?
I've come accross weird smells while working with metals so I'm willing to believe anything. |
I wondered about that.
I can't see any plausible route from iridium to anything that's volatile enough to smell.
I can explain garlic like smells from selenium, tellurium or arsenic.
So I'm left with the vague dilemma; which do I believe?
His nose or the XRF?
Well, I know XRF machines can get confused...
|
|
yobbo II
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 728
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
https://www.semanticscholar.org/paper/The-Au-Ir-(Gold-Iridium)-System-Okamoto-Massalski/422052c10cd8f4b160fa44773ff8508624aa1eb1
If you can obtain a phase diagram of Gold/Iridium it may show that the system melts at.
https://dl.asminternational.org/handbooks/book/36/chapter-ab...
Yob
[Edited on 6-2-2022 by yobbo II]
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 553
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
Pb is a problem:
https://link.springer.com/content/pdf/10.1007/BF03214762.pdf
By far the largest impurity in refined gold is usually Ag; but it forms a good solid solution to little effect on properties.
The link discusses Pb, Bi, Te and Si as impurities which in small concentrations concentrate at grain boundaries and make gold brittle - small like
100 ppm.
So what are the effects of Ir impurity to gold?
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by unionised ![](images/xpblue/lastpost.gif) |
I wondered about that.
I can't see any plausible route from iridium to anything that's volatile enough to smell.
I can explain garlic like smells from selenium, tellurium or arsenic.
So I'm left with the vague dilemma; which do I believe?
His nose or the XRF?
Well, I know XRF machines can get confused...
|
I thought about Se, Te and As too but those as Rainwater mentioned are mostly gone after roasting the ores as far as I know.
There's visible smoke being produced and a loss of weight.
It all comes back to his curious looking starting material. The answer for the smell probably lies there too.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
Rainwater
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 869
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I would have to say that the limitations of his equipment are causing issues.
He is using a graphite crucible.
Which @ 720c starts outgassing CO/CO2. And it looks like he used a graphite mold to, as evidenced from the gas bubbles in his final ingot.
His pouring temp was likely to be low, which caused the unsmoth surface and fractures in the final ingot.
All which leads me to subspect that the alloy produced may not be uniform, which will make the xrf very inaccurate.
The very first batch i ever sent off cost me almost 20% because of the impurities the refinery found. Low quantities = higher rates.
Hence my new found interest in chemistry. But i must add, i was drulling a little bit when i seen that coffee cup full. Far more that i run at once.
"You can't do that" - challenge accepted
|
|