ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
Detonator/blasting cap numbers and their meaning
I've been meaning to ask this for a while. No amount of googling or research I did ever seemed to really come up with a good answer, so I decided to
open this thread to see if anyone can give me the answer...
When I was looking into detonators/blasting caps the first thing I ever hear of is the #8 blasting cap. Which is the only cap that I was able to get
any clear definition of. The original #8 blasting cap was a 2 gram mixture of 80% mercury fulminate and 20% potassium chlorate. A modern equivalent is
around 0.45 grams of PETN. That's all I could find.
I heard of No.10 caps, No. 3, and No. 1. All I know is that that the larger the number, the stronger the cap. So a No.1 is the weakest and is used to
set off sensitive secondaries, while No. 10 is the strongest and can set off basically the most insensitive of secondaries. Or maybe I am wrong? Since
they don't mention if they have a booster like RDX or PETN in the tube along with the primary.
Anyone got the information on them? I've been curious for a quite a while on this.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1704
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Davies "Chemistry of Powders and Explosives" page 414, mercury fulminate detonators:
No. 1: 0,30g
No. 2: 0,40g
No. 3: 0,54g
No. 4: 0,65g
No. 5: 0,80g
No. 6: 1.00g
No. 7: 1.50g
No. 8: 2.00g
The original detonators used straight fulminate, the chlorate mixture was a later development.
[Edited on 23-12-21 by Fulmen]
We're not banging rocks together here. We know how to put a man back together.
|
|
ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
I assume that all of these are the 80/20 mix of mercury fulminate and chlorate?
OK that makes a lot of sense really. With modern (by modern I mean 100+ year old stuff) we can achieve the same power with a much smaller amount of
explosives.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1704
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Correct, todays compound detonators typically use PETN as the main charge and the reinforced head also increase performance.
We're not banging rocks together here. We know how to put a man back together.
|
|
ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
By reinforced head, I assume you mean the end of the detonator cap? Given that I am using plastic pen bodies as test caps, I am apt to agree that
those need to be properly sealed otherwise the endcap will just shoot off. I tested a chlorate filled pen and it went off like a rocket when the end
went off.
I noticed that some Bic pens have fairly solid end caps. Others need to have the end cap removed and a hot glue/epoxy seal put in.
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
No. It means a metal cup holding the primary in the cap. You tested Chlorate and what?
|
|
ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
I used a 50/50 mixture of potassium chlorate and superfine (not powdered) sugar.
|
|