HydrogenSulphate
Harmless
Posts: 38
Registered: 13-10-2019
Member Is Offline
Mood: Caffeinated
|
|
Ethylenediamine query
Hi all,
I have what I believe to be ethylenediamine, 99%. While it certainly has a characteristic odour I'd expect (ammonia-like), I am baffled as to why it
has not solidified at the subzero temperatures I'm storing it at. Its MP (literature value) is quoted to be in the region of 8 to 11 degrees C.
I have no particular reason to desire it in its solid form; it is just that I decided to store it in a repurposed chest freezer, considering that I
could detect a very faint odor (suggesting a slight leak) around the cap of the original glass bottle it was in (despite being stored in a cool place,
well out of direct sunlight). Leakage, no matter how minor, means loss of precious reagent over time, which I wish to minimize. So, I transferred it
to a Simax borosilicate reagent bottle with a PTFE-lined cap (the red cap), then I coated the bottle in several layers of clingfilm/Saran wrap to
protect the fragile glass against accidental knocks.
Its liquid volume has reduced a little since being stored below zero degrees C (some contraction, which is to be expected), but it has not solidified,
as I thought it would have, considering the literature MP. Maybe factors such as nucleation sites (a lack of, in this instance) are the explanation?
Also, I've noticed that it does not fume at all (well, not to any noticeable degree) in humid air (as high-conc ethylenediamine is 'supposed' to.,
according to literature).
Maybe its concentration is less than the stated 99%? I was planning on making some en-ligand organometallic complexes with it, but I think I'll
perform some chemical identification tests beforehand.
[Edited on 7-8-2021 by HydrogenSulphate]
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Melting point isn't the same as freezing point. For example, glycerol melts at 17,8 °C. But it doesn't freeze at this temperature. I tried it myself
- put 99,5% farmaceutical grade glycerol in to the fridge and didn't freeze. I asked about this behaviour my friend which teach physical chemistry at
high school and he told me, that melting and freezing point actually doesn't have to be at the same temperature. Look at this:
https://en.wikipedia.org/wiki/Melting_point
We tried to freeze glycerol using liquid nitrogen and it work. Solid glycerol is glassy like material.
I never worked with pure ethylenediamine, I have just its hydrochloride salt. What I saw on photos, it should fume. But I sometimes work with
diethylenetriamine and this compound doesn't fume. On the other hand it have 100 times lower vapor pressure than ethylenediamine (according to
wikipedia).
[Edited on 7-8-2021 by Bedlasky]
|
|
AvBaeyer
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 646
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
Ethylenediamine is rarely found anhydrous. The mp/fp quoted is for the anhydrous material. Usually it is sold as the equivalent of a monohydrate
although it may contain even more water. It is very difficult to make and keep anhydrous. That has been my experience. I have the "monohydrate"
material and it only fumes in very humid air.
AvB
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I do not know anything else than anhydrous ethylene diamine. I have purchased this chemical 3 times already (I used it quite a lot for coordination
chemistry experiments) and it always is anhydrous. It fumes heavily, even in quite dry air. The fumes, however, are remarkably mild. They are not
nearly as pungent as e.g. ammonia gas or HCl-fumes. Ethylene diamine has an ammonia-like odour, but much less pungent and a little more 'soil-like',
'organic'.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Bedlasky ![](images/xpblue/lastpost.gif) | Melting point isn't the same as freezing point. For example, glycerol melts at 17,8 °C. But it doesn't freeze at this temperature. I tried it myself
- put 99,5% farmaceutical grade glycerol in to the fridge and didn't freeze. I asked about this behaviour my friend which teach physical chemistry at
high school and he told me, that melting and freezing point actually doesn't have to be at the same temperature. Look at this:
https://en.wikipedia.org/wiki/Melting_point
We tried to freeze glycerol using liquid nitrogen and it work. Solid glycerol is glassy like material.
I never worked with pure ethylenediamine, I have just its hydrochloride salt. What I saw on photos, it should fume. But I sometimes work with
diethylenetriamine and this compound doesn't fume. On the other hand it have 100 times lower vapor pressure than ethylenediamine (according to
wikipedia).
[Edited on 7-8-2021 by Bedlasky] |
The melting temperature and the freezing temperature are the same.
What you have measured is the temperature at which it doesn't freeze.
That isn't the same as the temperature at which it does freeze.
You have prepared supercooled glycerine which is no surprise glycerine supercools very easily (in part because it is very viscous).
If you took your cold glycerine and put a tiny seed crystal of glycerin into it the liquid would freeze and the temperature would rise, possibly as
far as 17.8 C (as long as it doesn't start off too cold.)
The melting and freezing points are the temperature of the solid and liquid in equilibrium.
That mixture does not have a memory. It can not know if you are adding or removing heat.
So it can not know if it it melting or freezing.
So how could it know which temperature to choose?
|
|
Bezaleel
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 444
Registered: 28-2-2009
Member Is Offline
Mood: transitional
|
|
It's a phenomenon similar to supersaturation. For solids to start to form, a nucleation point will help. This could be a rough surface, a piece of
dust or an impurity, for example.
You can cool pure water to -30C and as long as you continue to move the vessel, it will not solidify.
|
|