Melkor333
Harmless
Posts: 11
Registered: 18-11-2018
Member Is Offline
|
|
Aspirator vacuum pump
I’ve recently got a stainless steel aspirator vacuum pump to use for vacuum distillations, and I’m using a 12V diaphragm water pump for the high
pressure water needed to flow through the aspirator and generate the vacuum. The pump gives a max of 130psi (according to the manufacturer) and I use
a DC power supply to power the pump. The pump works fine but I can’t seem to get a vacuum. I made sure that there wasn’t any water leaking out
where it shouldn’t but I don’t know what else might be the problem. There is barely a vacuum generated.
|
|
Johnny Cappone
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 74
Registered: 10-12-2020
Location: Brazil
Member Is Offline
|
|
Can you post some pictures of your setup? It can help us understand what the problem is. Does your pump produce a continuous flow of water, without
bubbles?
|
|
Melkor333
Harmless
Posts: 11
Registered: 18-11-2018
Member Is Offline
|
|
Quote: |
Can you post some pictures of your setup? It can help us understand what the problem is. Does your pump produce a continuous flow of water, without
bubbles?
|
Yeah there are bubbles
![6E1D891A-E031-4C24-9881-B65486B4B637.jpeg - 27kB](http://www.sciencemadness.org/talk/files.php?pid=659625&aid=88490) ![659AFB59-32D2-4770-920A-9E89192285A7.jpeg - 25kB](http://www.sciencemadness.org/talk/files.php?pid=659625&aid=88492)
|
|
monolithic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Try orienting the aspirator vertically, so it's ejecting water straight down.
|
|
Panache
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
Also try praying. There’s times when I’ve fucked around with a system for hours, and gotten nowhere so I disassembled only to have it run
perfectly the next day after reassembly.
Try creating a choke at the ejector output, causing a little back pressure.
|
|
Melkor333
Harmless
Posts: 11
Registered: 18-11-2018
Member Is Offline
|
|
Quote: Originally posted by Panache ![](images/xpblue/lastpost.gif) | Also try praying. There’s times when I’ve fucked around with a system for hours, and gotten nowhere so I disassembled only to have it run
perfectly the next day after reassembly.
Try creating a choke at the ejector output, causing a little back pressure. |
How would you suggest making this “choke”, cuz I’m not really familiar with this terminology?
|
|
Panache
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
Just something that slightly restricts the output flow. You can try to begin with by just very lightly putting your hand across it.
|
|
CouchHatter
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 151
Registered: 28-10-2017
Location: Oklahoma
Member Is Offline
Mood: 76 elements taken!
|
|
Colder water.
Eliminate the tubing on the aspirator bottom.
Check for debris in your aspirator. Pretty obvious, but without mesh screens, anything can find its way in there. I've had to clean mine 3 times.
What brand is your aspirator?
|
|
Melkor333
Harmless
Posts: 11
Registered: 18-11-2018
Member Is Offline
|
|
Quote: |
Colder water. Eliminate the tubing on the aspirator bottom. Check for debris in your aspirator. Pretty obvious, but without mesh screens, anything
can find its way in there. I've had to clean mine 3 times. What brand is your aspirator?
|
https://m.aliexpress.com/item/32969403552.html?spm=a2g0n.pro...
This is the aspirator I got
|
|
RustyShackleford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 198
Registered: 10-12-2020
Location: Northern Europe
Member Is Offline
|
|
Melkor you are the 5th person ive seen create such a setup and get bad performance. Personally my setup creates only 0.15 bar pressure drop (0.85
absolute pressure). Very very bad, but it still works for vacuum filtering so its not complete garbage.
Ive tried changing around the tubing, but nothing works well. Its a 24V "100Psi 6L/min" chinese pump from ebay.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
That aspirator looks identical to the one I almost got, which is by Deschem on Amazon. I looked at this review, where a guy complained that it wasn't pulling a good vacuum, so to troubleshoot it he dismantled it and saw the vacuum port was
superglued on to the main body:
Quote: | When I received it, I unscrewed all the other parts, but couldn't seem to unscrew the vacuum arm. I thought it was merely tightened on too strongly,
and so I thought no more about it. In usage then, there was no hint of a valve, and water flows into the vacuum line. The vacuum suction is
extremely weak to non-existent/not working, the water column into the vacuum line goes 6 to 10 inches, sometimes much more. And then that
water head/height barely moves/reduces (no suction).
I finally gave up since little to no vaccum was being generated, took it off and used a pair of pliers to loosen it. It barely 'unscrewed', it
more like fell out! Then I realized it had been glued on with instant/super glue... The O-ring had lost its compression and was stiff as a
rock. The male threading barely has any play to screw on, and (from the pictures, you can also see) the internal threading on the main body
is damaged as well... (which is why I assume they glued it back on instead). |
And apparently that wasn't a one-off thing, because after that bad review, they changed the name of the product to Deschem Stainless Steel Aspirator Pump,Humboldt,Lab Vacuum Hydro Aspirators Filter Pumps Rubber O-Ring with Super Glue for Seal.
I have no idea why they would do something like superglue it on instead of weld or even just solder it... But oh well.
The reason I'm bringing it up is because I can see the super glue in the photo of the aspirator product in the link you shared:
![Stainless-Steel-Aspirator-Pump-Humboldt-Lab-Vacuum-Hydro-Aspirators-Filter-Pumps.jpg_Q90.jpg - 67kB](http://www.sciencemadness.org/talk/files.php?pid=661486&aid=88986)
Also, I was talking to another user about aspirator pumps (over PM), and when I showed him that review, he said he had that identical pump a while
ago, and now realizes that it was also glued together (but didn't realize it at the time):
Quote: | Not gonna lie, that super glue stuff IS pretty sketchy of them. But at least they decided to disclose as opposed to turning the other cheek and
attempting to gaslight customers, I guess. The one I had did have threads there, though. I distinctly remember what I now realize was the glue failing
after which the port could be rotated. Also, when it broke off, the male port clearly had the female thread embedded in it. There was an o-ring too,
but it seemed almost as if the joint wasn't designed to be sealed with one. Tightening the port pretty much squeezed the o-ring out. It seems to me
that they sought to strengthen the joint and fix the o-ring in place by applying glue. |
If yours is glued on (which you should be able to tell), then perhaps the glue failed and it's pulling in air from the broken seal, which you
can either fix or return. Super glue is bound to fail when small amounts of solvent vapours get pulled through the vacuum port.
I plan on ordering the identical pump you have and set it up with my aspirator (which is this one here, works like a charm on my kitchen tap), and then maybe add a PWM speed controller for the DC motor inside the pump (with the reverse
diode fix that they don't usually come with, so the motor/PWM doesn't get fried).
[Edited on 8-6-2021 by SuperOxide]
|
|