SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Getting the sulfur smell out of glassware and reagent bottles
A while back I was recrystallizing sulfur using xylenes, and I didn't want to dispose of the xylene solution containing the residual because I could
use that for the next time I need to recrystallize sulfur. I kept it in a Pyrex 500mL GL45 capped bottle. However, I now needed that reagent bottle
for something else, so I xfered the xylene/sulfur solution to a diff bottle, but now that damn smell of sulfur won't seem to go away.
I rinsed it with some xylene, then washed it with hot water and soap, and let the whole thing soak even. I removed the clear plastic ring thing from
the lip thinking maybe the smell was from sulfur particles trapped in that and re-washed everything, let it air-dry for 4 days... but that damn smell won't go away ![:mad:](./images/smilies/mad.gif)
Anyone have any tips for getting the smell of sulfur out? This seems like a rather petty thing to have to ask for help on, so I apologize for that.
Usually the chemicals I work with (as a noob) aren't this difficult to clean up.
Thanks in advance for any advice.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Use a strong oxidant after triple rinsing with acetone (removes other organics) then water (removes the acetone), so 6 rinses.
Bleach is probably the best bet, use it straight and fully submerge and soak the vessel.
Sulfur is not that soluble even in hot xylene, toluene is better.
An oxidant will convert sulfur and any sulfides or mercaptans (which really smell and probably what you are dealing with) to sulfuric acid and carbon
dioxide.
You need to use a triple treatment method, possibly even four or five to reduce it below the odor threshold which is 2 PPB or less for mercaptans.
In bleach the sulfuric acid will be converted to sodium sulfate.
A side note xylene will react with the sulfur releasing hydrogen sulfide and forming all kinds of nasty side products.
The same will happen with toluene but at a much slower rate.
From a purification perspective, the side products are left in the xylene or toluene so they aren't important.
From a storage standpoint they can lead to the problem you currently have.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Quote: Originally posted by macckone ![](images/xpblue/lastpost.gif) | Use a strong oxidant after triple rinsing with acetone (removes other organics) then water (removes the acetone), so 6 rinses.
Bleach is probably the best bet, use it straight and fully submerge and soak the vessel.
Sulfur is not that soluble even in hot xylene, toluene is better.
An oxidant will convert sulfur and any sulfides or mercaptans (which really smell and probably what you are dealing with) to sulfuric acid and carbon
dioxide.
You need to use a triple treatment method, possibly even four or five to reduce it below the odor threshold which is 2 PPB or less for mercaptans.
In bleach the sulfuric acid will be converted to sodium sulfate.
|
Thank you! I will give that a go.
Quote: Originally posted by macckone ![](images/xpblue/lastpost.gif) | A side note xylene will react with the sulfur releasing hydrogen sulfide and forming all kinds of nasty side products.
The same will happen with toluene but at a much slower rate.
From a purification perspective, the side products are left in the xylene or toluene so they aren't important.
From a storage standpoint they can lead to the problem you currently have. |
Interesting - So perhaps I shouldn't keep the xylene/sulfur mixture if I don't plan on using it within a reasonable timeframe? Good to know. I'll get
rid of it (I don't plan on using it for a while anyways).
|
|
symboom
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
I read somewhere that acetic acid can dissolve sulfur
I'll see if I can find the link
I'd say hydrogen peroxide or bleach is very good at removing sulfur smell
[Edited on 11-11-2020 by symboom]
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
I recrystallized a sulfur compound from toluene once and when I recovered the toluene by redistillation, the foul stench never went away.
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Household bleach works well on most sulfur smells. You should be able to stir the toluene with it and then separate it and recover most. And wash
your glassware in it. I don;t think hydrogen peroxide is a strong enough oxidant, but it might work in some cases.
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
That's interesting and clever, actually. Toluene's practical insolubility makes washing it trivial with any water-based stuff and if it removed the
absolute stench, it allows much more comfortable reuse of it. It's a good recrystallizing solvent, but some sulfur compounds just reek the hell out of
any person. Hell, my fume hood actually still has occasional hints of that synthesis even it's almost 2 months.
I'm always vary of distilling stuff that's made with strong oxidizers, nitrates, peroxides or chlorites because of fear of explosion hazard. Even when
I never ever distill anything to dryness, for very few singular exceptions.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Yes, toluene and xylene need a phase transfer catalyst to be oxidized by hypochlorite.
A lot of mercaptans have substantial solubility in water.
And mercaptans are oxidized by hypochlorite.
Interestingly toluene can be converted to benzaldehyde with hypochlorite and a phase transfer catalyst.
No clue why it doesn't proceed to benzoic acid but it apparently gives a high yield.
|
|
pneumatician
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
Put water full, rest some days, remove and repeat, 3 or 4 times and the smell is removed.
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
I actually did try that, and I could still smell it a bit. The bleach worked a charm, I just didn't try that before because I didn't have any on hand
and most places I went at for a while were out due to pandemic (though I did try that COMET powder stuff, which says it has bleach, and it didn't work
as well as I expected).
I went out and got some regular ol bleach as suggested, and stores had restocked (it was a little while since I went looking for some).
|
|
pneumatician
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
with bleach maybe you change sulfur by bleach smell
|
|
SuperOxide
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Which is fine... since that kinda goes away on its own, lol.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Sulfur is readily oxidizable. Adding bleach converts it to sodium sulfate if you use enough
The mercaptans are the real issue, they wreak. But they are also readily oxidized by bleach.
Oxidizing lower mercaptans in a basic solution (aka bleach) converts them to sodium sulfate and sodium acetate and such.
All of which have much less smell than mercaptans.
If toluene is the primary thing that was converted to mercaptan (benzyl thiol) then you wind up with sodium benzoate.
|
|
TriiodideFrog
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
You can pour some carbon disulfide into the bottle and let it soak inside.
|
|