Fery
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
gas apparatus - inspirations for reactions
Do you have some inspiration which reactions could be performed in this gas apparatus?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
That's a very nice piece of glassware. A nice reaction (not for practical purposes, but it makes a beautiful demo) would be to have one half of the
apparatus filled with NO gas, and the other half with pure O2, which is attached to an O2-generator. If you then open up the center connection and
assure that the oxygen pressure is slightly positive, then you get a flow of O2 into the NO, forming a dark brown cloud of NO2 in the NO.
Another interesting reaction may be to mix NO and Cl2, forming orange/brown ONCl.
|
|
Fery
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
Thank you very much woelen ! When at least one of the gases has a color would demonstrate nice reaction. So I'll try to win such apparatus in an
auction where I found it today.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If you do the NO + O2 reaction, then the gases must be somewhat humid. The water vapor is necessary, otherwise the reaction is very slow. When you
produce the O2 from aqueous solution (e.g. from 10% H2O2), then there is more than enough water vapor in the gas. In that case, the reaction is very
fast and impressive. You also get formation of underpressure (2NO + O2 --> 2NO2, 3 molecules of gas produce two molecules), which leads to sucking
oxygen into the NO, once the reaction has converted part of the gas already. I think that you could make a very nice demo from this.
For synthetic purposes, it may also be useful. You have two gas flow path, which can be regulated independently, if you close the center path. If you
have two kipp-generators, you could make two different gases and regulate the flow of these gases independently. This could be used to make e.g.
SO2Cl2 from SO2 and Cl2 with carbon as catalyst. You can alternately lead Cl2 and SO2 into the mix and observe the reaction going and based on this
allow one gas or the other gas to flow into the reaction chamber. In this case, however, you need meticulously dried gases, otherwise you get HCl and
H2SO4 instead of SO2Cl2. I myself have wanted to do this reaction, but I never managed to do so, because I do not have the equipment to regulate the
gas flows in a decent way.
|
|
RustyShackleford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 198
Registered: 10-12-2020
Location: Northern Europe
Member Is Offline
|
|
Very cute. do you have a reflux condenser that could work with the left part? if so i have an idea
|
|
Fery
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
Hi RustyShackleford, I do not yet have the apparatus. But no problem adding reflux condenser, at worst made from stopper + condenser without ground
glass joints when the size of the aperture of the left part unusual...
Which idea do you have?
|
|