vibbzlab
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 241
Registered: 6-11-2019
Member Is Offline
Mood: Always curious
|
|
Help in preparation of phosphotungstic acid
Hello all
I have like 300g of sodium tungstate with me and I really wanted to make phosphotungstic acid. I lookes a lot of books and articles and I found this
Phosphotungstic acid, stock: Dissolve 100 g sodium tungstate (Na2WO4, 2H2O) in 800 ml water in a round bottomed flask. Add 80 ml of 85%
phosphoric acid, attach a reflux condenser and gently boil for 2 h. Cool. Dilute to 1L with water, mix and store in a brown bottle.
Dilute 1 in 10 with water for use.
But this is actually for a stock solution. I wanted to get the solid product. Can i try getting it with this same procedure or someoneelse got any
other easy methods? do share
thanks in advance
Amateur chemist. Doctor by profession
Have a small cute home chemistry lab.
Please do check out my lab in YouTube link below
This is my YouTube channel
|
|
Antigua
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 155
Registered: 27-9-2020
Member Is Offline
|
|
From US Patent: https://patents.google.com/patent/US3288562A/en
Example I A solution of 103 g. of sodium tungstate,
Na2WO4x2H20 in 600 ml. of water was heated to about 90 C., and 347 g. of tungstic acid, H WO was added to the heated solution. Only a portion of the
tungs-tic acid dissolved imediately, and heating of the suspension of the balance of the tungstic acid in the solution was continued for about minutes
at about 90 C. The suspension was agitated continuously during this digestion operation. In the presence of the excess tungstic acid the sodium
tungstate was converted to sodium metatungstate,
Undissolved tungstic acid was filtered from the sodium metatungstate solution and 17.3 g. of phosphoric acid (85% H PO was added to the clarified
solution. The resulting solution of sodium phosphotun-gstate was diluted to a specific gravity of 1.290 (about 30% solids content) and the diluted
solution was passed through an ion exchange column packed with Duolite C- resin on the hydrogen cycle at the rate of about rnL/minute. After the
sodium ion content had been exchanged from the solution by contact with the resin it was concentrated by evaporation and the phosphotungstic acid was
crystallized out. The crystalline product analyzed 92.1% W0 2.6% P 0 5.3% H 0 and less than 0.05% Na O
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
That ion exchange resin in Antigua's procedure is crucial for obtaining the phosphotungstic acid in its neutral form. It is a very
strong acid (pKa ~= -10) so it cannot be very easily prepared as an acid (rather than as its salts).
For example, this procedure:
"Phosphotungstic acid, stock: Dissolve 100 g sodium tungstate (Na2WO4, 2H2O) in 800 ml water in a round bottomed
flask. Add 80 ml of 85% phosphoric acid, attach a reflux condenser and gently boil for 2 h. Cool. Dilute to 1L with water, mix and store in a brown
bottle. Dilute 1 in 10 with water for use."
will probably give you the sodium salt Na3PW12O40.
You may be able to obtain the phosphotungstic acid by gassing the solution with excess HCl to precipitate NaCl. However precipitating sodium this way
is inefficient.
|
|
vibbzlab
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 241
Registered: 6-11-2019
Member Is Offline
Mood: Always curious
|
|
I dont have any ion exchange setup in my lab. Is there any other way?
Amateur chemist. Doctor by profession
Have a small cute home chemistry lab.
Please do check out my lab in YouTube link below
This is my YouTube channel
|
|
Bezaleel
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 444
Registered: 28-2-2009
Member Is Offline
Mood: transitional
|
|
A thought: could thermal decomposition of the ammonium salt lead to the acid? I don't know how thermally stable the phosphotungstate ion is.
I suppose that the addition of sulphuric acid to a solution of sodium tungstate will give poorly soluble tungstic acid, so that would be a way to
remove your sodium without the use of an ion exchange column.
|
|