B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
Jute nitration failure
I had the idea that I may be able to nitrate jute string and use it as cheap fuse for simple pyrotechnics. My thought was that it would contain
sufficient cellulose to hold its structure through nitration.
I made a nitration solution of 10 mls conc HNO3 and 10 mls conc H2SO4. Once it had returned to room temp I added about 400 mm of jute string. I left
it to react for about 30 minutes. I had hoped that I would then remove the string, rinse with water then boil in water. Unfortunately there was
nothing left to remove, must be way more lignin in jute than I had anticipated. Presumably the acid mix destroys the bonds between the lignols?
|
|
mayko
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1218
Registered: 17-1-2013
Location: Carrboro, NC
Member Is Offline
Mood: anomalous (Euclid class)
|
|
my attempt at nitrobacco ended similarly:
https://www.sciencemadness.org/whisper/viewthread.php?tid=25...
al-khemie is not a terrorist organization
"Chemicals, chemicals... I need chemicals!" - George Hayduke
"Wubbalubba dub-dub!" - Rick Sanchez
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Have you tried cotton string/twine ?
https://www.google.com/search?q=cotton+string&safe=activ...
As cotton wool makes good nitrocellulose I'd expect cotton string to behave similarly.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
I haven't tried cotton string. I agree that it would likely work well. I will try it at some point, presumably someone else has?
|
|
wg48temp9
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 771
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
I would think a gun cotton fuse would be fast and not very effective as an ignition source.
When my father made fireworks fuses he coated wool strands in a wet black power mixture that probably contained gum arabic. After dipping the wool
thread in the mixture it was pulled thru a hole and then hung up to dry. You can probably find recipes at pyro sites.
For slow fuses simply dipping cotton string or paper in a nitrate and then drying works but you need something easily ignited at the ignition end.
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
I tried jute because I had hoped the lignin content might give it a slower burn rate.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Rule of thumb: if plant derived material is strong (jute eg.) there is a lot of lignin, if it is flexible (cotton) there is more cellulose.
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
Ah yep, good tip thanks, makes sense.
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by B(a)P ![](images/xpblue/lastpost.gif) | I haven't tried cotton string. I agree that it would likely work well. I will try it at some point, presumably someone else has?
|
I have.
I did this years ago with simple cotton string.
- The string breaks easily after nitration
- The string leaves a lot of residue compared to NC from cotton.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
Was the burn rate the same as NC from cotton wool?
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
No. But cotton wool burns in a flash.
With cotton string it burns slow enough for you to know it wont meet expectations.
The reason si mostly that mixed acids dont penetrate well enough.
Lint is better than cotton wool which in turn is better than cotton string.
If you dont have Urbanski's books get them from the library. There's about 60 pages on the choice of cellulose alone in the NC chapter and it's pretty
interesting.
The spirit of adventure was upon me. Having nitric acid and copper, I had only to learn what the words 'act upon' meant. - Ira Remsen
|
|